Klüber

Klüber CATENERA KSB 8

Adhesive dampening greases of medium to high shear viscosity

Application Klüber CATENERA KSB 8

CATENERA KSB greases are used for friction points requiring high mechanical dampening and good adhesion, e.g. low-speed rolling and plain bearings, small gears, threaded spindles, eyepieces and binoculars. CATENERA KSB is available in three shear viscosity grades in order to meet dampening and adhesion requirements. For even higher shear viscosities we refer to the Klübersynth RA greases.

Klüber ISOFLEX TOPAS NCA 52

Synthetic long-term grease for rolling and plain bearings, linear motion guides

Application Klüber ISOFLEX TOPAS NCA 52

ISOFLEX TOPAS NCA 52 is used for high-speed rolling and plain bearings as well as for small gears subject to high loads. Due to the good compatibility with plastics the grease is suitable for plastic-plastic or metal-plastic material combinations. The low starting torque and the good wear protection make it an ideal grease for the long-term lubrication of linear motion guides and ball screws, e.g. in handling and automation technology. ISOFLEX TOPAS NCA 52 can also be used for many automobile applications, e.g. for the lifetime lubrication of seat rails. It is suitable for components which have to be lubricated prior to dip painting and the drying process at peak temperatures of 180 °C as the lubricant remains at the friction point and provides reliable lubrication even after short thermal treatment.

Klüber Centoplex H0

Multi-purpose grease

Application Klüber Centoplex H0

CENTOPLEX HO is used for the lubrication of toothed and worm gears and for small low-power gears. It can also be used in well-sealed rolling and plain bearings with low internal clearance and operating at high speeds. CENTOPLEX HO is used e.g. in garage door drives, plain bearings in telescopic axles, leaf springs in rail vehicles, and as a multi-purpose grease in lorries, construction vehicles, special-purpose and agricultural vehicles.

Klüber ISOFLEX LDS 18 SPECIAL A

Dynamically light, long-term lubricating grease

Application Klüber ISOFLEX LDS 18 SPECIAL A

ISOFLEX LDS 18 SPECIAL A is suitable for plain and rolling bearings operating at low temperatures and/or high speeds, for example in grinding spindles, machine tool spindles, spindle bearings, textile spindles, bearings in OE-spinning turbines, bearings in precision and optical equipment.

Klüber Klübersynth BEM 44-4600

Fully synthetic high-performance fluid grease for a wide service temperature range

Application Klüber Klübersynth BEM 44-4600

Your technical challenges may be found in general industrial equipment, machine tools, heavy industry equipment (mining and cement), robotics, chemical and agricultural machinery. Examples are: Crushers, vertical roller mills, hammer mills; Mobile drilling equipment; Cranes, e.g. harbour or mining; Mixer and reactor drives; Harvesting machines; Conveyor belt drives

Klüber Klübersynth PEG 46-121

Special greases for the lubrication of enclosed gear drives

Application Klüber Klübersynth PEG 46-121

Klübersynth PEG 46 greases were developed especially for the lubrication of spur gears, bevel gears, planetary gears and worm gears with material pairings steel/steel or steel/brass in small enclosed gear drives. Klübersynth PEG 46 greases can also be used for the lubrication of ball and roller guides, rolling and plain bearings as well as toothed couplings.

Klüber STABURAGS NBU 12

Lubricating greases with excellent wear resistance

Application Klüber STABURAGS NBU 12

STABURAGS NBU 4 has been used successfully on highspeed rolling bearings exposed to humidity or ambient media. It is suitable for rolls, spindles, cam rollers, tensioning rollers and motors. STABURAGS NBU 12 is efficient on medium-speed rolling bearings subject to humidity or ambient media. It is used on water pumps, wheel bearings and motors; and in the textile industry, on all wet processing equipment such as washing, mercerising and dyeing machines.

Klüber Klüberbio LG 39-700 N

Eco-compatible operating lubricant for open gear drives

Application Klüber Klüberbio LG 39-700 N

Klüberbio LG 39-700 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for sliding surfaces with high surface pressure. The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high load-carrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.

MICROLUBE GL 261

Special lubricating greases for boundary friction conditions and tribo-corrosion

Application MICROLUBE GL 261

MICROLUBE GL 261, GL 262 greases are particularly suitable for low to medium-speed plain and rolling bearings, and for swivel movements and vibrations. Other applications: linear guides; serrations, multiple spline shafts; small gears, e.g. adjustment gears They are generally suitable for machine elements potentially subject to tribo-corrosion.

Klüber Klüberplex BEM 41-132

Speciality rolling bearing grease for demanding applications

Application Klüber Klüberplex BEM 41-132

Klüberplex BEM 41-132 can be used for long-term or lifetime lubrication of rolling bearings. For rolling bearings with a high degree of sliding friction, e.g. tapered roller bearings; cylinder roller bearings; spherical roller bearings or for-life lubricated deep groove ball bearings and rolling bearings e.g. in paper-making machines (dry section); textile machines (dry section); electric motors; hot air blowers; drying ovens; air separators in the base materials industry; generators in wind power plants or rolling bearings in vehicle components clutch bearings; generator bearings; water pump bearings; fluid fan bearings

Kluber Centoplex GLP 500 1 Kg

Fluid multipurpose grease for long-term lubrication

CENTOPLEX GLP 500 advantages:

• Multipurpose grease for long-term lubrication
• High-pressure absorption capacity
• Applicable through central lubrication systems, especially single-line lubrication systems

Klüber Klübersynth UH1 6-100

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology

Application Klüber Klübersynth UH1 6-100

Klübersynth UH1 6 oil is used for the lubrication of highly loaded spur, bevel and planetary gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. Klübersynth UH1 6 oil was especially developed for the lubrication of worm gears with steel/bronze pairings. It can also be used for the lubrication of lifting, drive and transport chains.

Klüber Klüberalfa DH 3-350 N

Lubricating oil with good wetting properties for plastic friction points

Application KKlüber Klüberalfa DH 3-350 N

Klüberalfa DH 3 N can be used for the wetting of metals and synthetic material parts of various configurations. Due to their good material compatibility, these products should be your first choice for the vehicle interior. Application examples: – Contact surfaces with different material pairings in the dashboard: minimisation of unwanted noises – Impact, rubbing and sliding points inside cars, even of various material pairings – Sliding guides in the centre console, cup holder, navigation screen – Locking mechanism of trays, ventilation flaps, etc. General behaviour towards plastics and elastomers Perfluorinated polyether oils are generally regarded as neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Despite this, prior to a series application, the compatibility of the lubricant with the material with which it is to come into contact, must be confirmed.

Klüber Syntheso D 68

Synthetic high-temperature lubricating oils

Application Klüber Syntheso D 68

SYNTHESO D oils are used for the lubrication of friction points subject to high temperatures. They are also used as pressure fluids in high-temperature applications, and as heat carrier fluids. Owing to the base oil’s high pressure absorption capacity and good wear protection, SYNTHESO D oils are particularly suitable for hydraulic or heat transfer applications where lubricity has to be ensured at high temperatures.

Klüber Klüberbio AG 39-602

Environmentally acceptable adhesive lubricant for open gears and steel cables

Application Klüber Klüberbio AG 39-602

Klüberbio AG 39-602 was developed for the lubrication of open pinion gears on winches and jack-up platforms, as well as steel cables in contact with water. The product can also be used in other maritime applications that require lubricants to have good water washout resistance, very good anti-corrosion resistance and/or good load-carrying capacity such as with low-speed plain bearings, guide rails and open winch gears.

Klüber Tyreno Fluid E-95V

for low and fine vacuum applications

Application Klüber Tyreno Fluid E-95V

Working fluid for mechanical backing pumps extracting aggressive gases and vapours, but not oxygen or halogens. Universal oil offering a high viscosity index, excellent condensate separation and dispersing effect. Klüber Tyreno Fluid E-95V achieves a final pump pressure of approx. 10–2 mbar measured in a double-stage backing pump.

Klüber Klübertec CM 6-100

High-performance oils for cold forming

Application Klüber Klübertec CM 6-100

Klübertec CM 6 oils may be used in many cold-forming applications as well as for blanking and shearing of thin or thick sheet metal. Examples of applications are: Forming under tensile or compressive conditions such as rolling or deep-drawing; Forming under bending conditions, hydro-forming; Precision blanking of aluminium or aluminium alloys (see application notes), nonferrous metals, steel or stainless steel.

Klüber Klübersynth CH 2-100 N

High-temperature chain oils

Application Klüber Klübersynth CH 2-100 N

The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures. Applications of this kind are found, for example, in the surface treatment and coating of industrial goods. Other possible applications are: conveyors used by automotive suppliers, metalworking companies, furniture and white goods makers; driers, e.g. for gypsum boards

Klüber Klüberbio LG 39-701 N

Eco-compatible operating lubricant for open gear drives

Application Klüber Klüberbio LG 39-701 N

Klüberbio LG 39-701 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for sliding surfaces with high surface pressure. The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high load-carrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.