Klübertec

Klüber Klübertec CM 6-100

High-performance oils for cold forming

Application Klüber Klübertec CM 6-100

Klübertec CM 6 oils may be used in many cold-forming applications as well as for blanking and shearing of thin or thick sheet metal. Examples of applications are: Forming under tensile or compressive conditions such as rolling or deep-drawing; Forming under bending conditions, hydro-forming; Precision blanking of aluminium or aluminium alloys (see application notes), nonferrous metals, steel or stainless steel.

Klüber Klübertec ST 4-702

Stamping and forming fluid with residue-free evaporation

Application Klüber Klübertec ST 4-702

• Stamping and forming of metal sheets of all types, e.g. for electric motors and components; sheet thickness up to 2.5 mm
• Easy to medium forming processes, especially if there are no additional cleaning steps
• Stamping and fine blanking of metals, such as aluminium and aluminium alloys; non-ferrous metals; steels
• Drawing, rolling, edging and folding of e.g. drums and drum lids

Klüber Klübertec ST 4-701

Stamping and forming fluid

Application Klüber Klübertec ST 4-701

• Blanking & drawing of steel and non-ferrous sheet metal between 0.2 and 2.5 mm thick
• Rolling, deep drawing, edging and folding, e.g. in the manufacture of drum lids
• Preserving steel components, e.g. brake parts
• Corrosion protection of assembly components

Klüber Klübertec CM 2-004

Metalworking oil registered as NSF H1

Application Klüber Klübertec CM 2-004

Basic uses of Klübertec CM 2-004 are in simple metalworking processes – e.g. punching or light forming processes – where a product registered as NSF-H1 is required. Typical examples of use are: Deep-drawing of aluminium foil packages for the foodprocessing or pharmaceutical industries, cans, crown caps and other bottle caps; Light forming, e.g. edging of thin or very thin steel or other sheet metal containers for food or pharmaceutical products; Punching of thin or very thin aluminium or steel sheets for subsequent processing