Castrol

CASTROL Tribol GR 100-2 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-2 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-2 PD drops automatically in larger quantities.

CASTROL Tribol GR 100-1 PD

High Performance Bearing Greases

Application CASTROL Tribol GR 100-1 PD

The Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings. Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates. These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. Examples are spreader rolls, roll neck bearings in steel mills, and bearings with changing rotational directions or slewing movements. They are also used in curved teeth couplings and centralised lubricating systems. Tribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. These two products are also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir

Your advantage! Price of CASTROL Tribol GR 100-1 PD drops automatically in larger quantities.

CASTROL SPHEEROL AP 3

Bearing Grease

Application CASTROL SPHEEROL AP 3

Spheerol AP 2 and AP 3 are primarily intended for use in plain and anti-friction , ball and roller bearings besides other machinery applications. They are recommended for use under normal load conditions, within an operating temperature range of -20°C to +120°C. Due to the low viscosity used in these products, they are particularly suitable for high speed bearings. Spheerol AP 3 is suitable for severe vibaration conditions.

Your advantage! Price of CASTROL SPHEEROL AP 3 drops automatically in larger quantities.

CASTROL High Temperature Grease

Multipurpose High Temperature Grease

Application CASTROL High Temperature Grease

Castrol High Temperature Grease is intended for use in a wide range of plain and rolling element bearings within both the Automotive and Industrial markets, especially targeting those applications where upper operating temperatures are likely to exceed the limits of conventional, lithium thickened greases. The excellent thermal and mechanical stability of Castrol High Temperature Grease make it particularly suitable for use in automotive bearing applications where rotational speeds may be higher or prolonged heavy braking may generate higher than normal hub temperatures. Specific examples may include cars fitted with disc brakes or commercial vehicles such as trucks or buses. Castrol High Temperature Grease also offers good resistance to water and corrosion as well as very good load carrying performance making it suitable for general vehicle chassis lubrication or bearings on off-road construction vehicles where greater extremes of pressure may be prevalent.

Castrol Power RS 2T

is a state-of-the-art fully synthetic 2-stroke engine oil for modern high-load 2T engines.

The powerful protective formula of Castrol Power RS 2T is designed for maximum performance with superior protection and high engine cleanliness at the same time. This formula was to apply a very strong, ever-changing and protective lubricant film to all major engine components. That's why your engine can take full advantage of Castrol Power RS 2T. Has high protective properties and promotes complete combustion.

Castrol Power RS 2T is suitable for both Japanese and European 2-stroke racing and dirt bikes, such as Aprilia, Honda, Suzuki, Kawasaki, KTM and Yamaha with the most powerful engines.

Specifications:

• API TC
• JASO FD
• ISO EGD

Check here if Castrol Power RS 2T 2-stroke engine oil is the most suitable for your engine.

Buy a full box 12x & 1L and save on the litre price!

Castrol Magnatec 10W-40 A3/B4

Properties

Semi synthetic motor oil.

Castrol Magnatec 10W-40 A3/B4 is suitable for use in Automotive petrol and diesel engines where the manufacturer recommends an API SL/CF, ACEA A3/B4, A3/B3 or earlier specification 10W-40 lubricant.

Approvals

Castrol Magnatec 10W-40 A3/B4 is also approved for use in VW group vehicles that require a VW 501 01 / 505 00 specification 10W-40 lubricant.

Mercedes vehicles that require an MB-Approval 226.5/229.1 10W-40 lubricant.

Castrol Power RS 4T 10W-40

Castrol Power RS Racing with Trizone Technology™ is a premium-quality, semi-synthetic 4-stroke motorcycle oil.

Its anti-friction formulation is proven to increase acceleration compared to conventional motorcycle oils.

• Race-derived technology for maximum engine acceleration.
• Extreme high-temperature air-cooled and water-cooled engine performance.
• Castrol Power RS 4T 10W-40 has an excellent shear stability to prevent viscosity breakdown.
• Superior high-speed engine protection to help extend engine life.
• Outstanding oil consumption and control, gearshift quality and wet-clutch performance.

• API SERVICE: Exceeds API SN
• JASO (T903): JASO MA-2
• VISCOSITY: SAE 10W-40

Castrol Magnatec 5W-40 C3

Properties

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN/CF or earlier specification.

5W-40 lubricant. Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Castrol Magnatec 5W-40 C3 has been specially formulated to deliver outstanding protection for the latest engines fitted with after treatment devices such as diesel particulate filters and 3 way catalysts

Approvals

Castrol Magnatec 5W-40 C3 is approved to *GM dexos2®: supersedes GM-LL-B-025 and GM-LL-A-025

Castrol Magnatec Diesel 5W-40 DPF

Properties

Diesel Particulate Filter compatible technology maintains engine efficiency and responsiveness.

Provides superior performance under extreme cold start-up conditions compared to thicker grades.

Excellent soot handling performance minimises oil thickening.

Exceeds the most demanding limits in the latest industry standard diesel protection test .

Suitable for SUV, 4WD and most cars fitted with Diesel Particulate Filters, including Hyundai vehicles with DPF.

Castrol Transmax ATF DX III Multivehicle

Automatic Transmission Fluid

CASTROL Transmax Manual FE 75W previously Syntrans FE 75W

Fuel Efficient Manual Transmission Fluid

Castrol Alpha EP 100

Industrial Gear oil

Appliciation Castrol Alpha EP 100

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OlieOnline Technical Helpdesk

Castrol Alpha EP 150

Industrial Gear oil

Appliciation Castrol Alpha EP 150

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OlieOnline Technical Helpdesk

Castrol Magnatec 5W-30 A5

Properties

Castrol Magnatec 5W-30 A5 is suitable for use in automotive petrol and diesel engines where the manufacturer recommends ACEA A5/B5, A1/B1 or API SN/CF ILSAC GF-4 5W-30 Lubricant.

Up to 75% of engine wear happens while your engine warms up. When the engine stops oil drains off critical engine parts, however Castrol Magnatec’s intelligent molecules don’t. They cling to the engine like a magnet providing an extra layer of protection.

Specifications/ Approvals

Castrol Magnatec 5W-30 A5 has been developed for use in Ford vehicles that require a 5W-30 lubricant that meets Ford WSS-M2C913-D, Ford WSS-M2C913-C, WSS-M2C913-B or WSS-M2C913-A.

Castrol Alpha EP 320

Industrial Gear oil

Appliciation Castrol Alpha EP 320

The Castrol Alpha EP range offers good gear performance for most types of gears. The Castrol Alpha EP range is also suitable for mechanical-hydrodynamic transmissions, turbo clutches and hydraulics

If you have any questions, please contact OlieOnline Technical Helpdesk

Castrol EDGE 5W30 M LL-04

Stronger Under Pressure

Application Castrol EDGE 5W30 M LL-04

Castrol EDGE 5W30 M LL-04 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3, API SN 5W-30 Lubricant. Castrol EDGE 5W30 M LL-04 is approved for use in BMW vehicles that require a BMW Longlife04 specification 5W-30 lubricant.

CASTROL Transmax Agri Trans AS 80W

Anti-squawk transmission fluid

Your advantage! Price of CASTROL Transmax Agri Trans AS 80W drops automatically in larger quantities.

Castrol Transmax Agri MP 15W-40 Previous Castrol Vanellus Agri Universal 15w40

Multi-functional tractor oil

CASTROL SPHEEROL SX 2

Calcium complex grease

Application CASTROL SPHEEROL SX 2

Spheerol SX 2 is a true multipurpose ship machinery lubricant, specifically developed to provide enhanced lubrication and protection for bearings, wire ropes and open gears usually found in marine environments. Spheerol SX 2 is suitable for most journal bearings, wire ropes and open gears used in marine deck equipment and can be considered for roller, ball and needle bearings generally used in engine room equipment. In addition to the excellent protection provided for wire ropes and open gears, Spheerol SX 2 is also suitable for use on a wide range of deck equipment where it will protect and lubricate hinges, turnbuckles, screws, fair leads etc. For multipurpose applications a grease gun may be used with Spheerol SX 2. Alternatively traditional application methods can be used for wire ropes and open gears. (Please see also "Additional Information")

Your advantage! Price of CASTROL SPHEEROL SX 2 drops automatically in larger quantities.

Castrol Edge Titanium FST 5W-30 LL (Longlife) New Hyspec

Application

Castrol EDGE 5W-30 LL (Longlife) is suitable for use in automobile, gasoline and diesel engines where the manufacturer recommends an ACEA C3 specification 5W-30 lubricant. Castrol EDGE 5W30 LL is approved for use in vehicles that require a VW 504.00 / VW 507.00, Porsche C30 or MB-Approval MB 229.31/ MB 229.51 5W-30 lubricant.

Castrol EDGE 5W30 LL:

• Maximises short and long-term engine performance 
• Castrol EDGE 5W30 LL reduces engine deposits to help maximise engine response 
• Sustains maximum performance even when under pressure 
• Independently proven to Improve engine efficiency 
• Castrol EDGE 5W30 LL delivers unsurpassed levels of protection across a variety of driving conditions and temperatures