Heat transfer

Shell Heat Transfer Oil S2 Previous Name: Shell Thermia B

High-Performance Heat Transfer Fluid

Shell Heat Transfer Oil S2 main applications:

• Enclosed circulated heat transfer systems for industrial applications such as process industry, chemical plants, textile producers etc. and in household equipment such as oil filled radiators.
• Shell Heat Transfer Oil S2 can be used in high-temperature continuous heat transfer equipment with the following application limits: Max.
  Bulk temperature: 320oC
  Max. film temperature: 320oC
   

Shell Heat Transfer Oil S2 is based on carefully selected, highly refined mineral oils chosen for their ability to provide superior performance in indirect closed fluid heat transfer systems.
For open systems we advise you to use an other oil. Please contact us for advise

Pay attention! Price of Shell Heat Transfer Oil S2 drops automatically in larger quantities.

TOTAL SERIOLA 32

Mineral based heat transfer fluid

Applications TOTAL SERIOLA 32

• SERIOLA 32 and 100 are recommended for heat transfer installations using thermal fluid circulation, in open and closed circuits
• SERIOLA 32 and 100 are suitable for heating and temperature control in all industries, and particularly for following manufacturing processes: Steam production, Paper Industry,  Timber Industry, Textile Industry, Oil & Gas

Your advantage! Price of TOTAL SERIOLA 32 drops automatically in larger quantities.

Molyduval Silo D 50

high performance Heat transfer oil

Main applications of Molyduval Silo D 50 are:

Silicone based lubricating oil with extremely high thermal stability. Compared with other lubricants, it has a very high viscosity index, which means a relatively constant viscosity within a wide temperature range.

The product is crystal clear, extremely good water repellent and resistant to oxidation. Also available in many other viscosity grades.

Attention: Molyduval Silo D 50 Automatic price reduction for bigger order quantities

MOLYDUVAL Celsius A 22

Synthetic heat transfer oil

A synthetic special fluid for heat transfer systems

A synthetic special fluid for low temperature heat transfer systems.

Main applications of MOLYDUVAL Celsius A 22 are:

• + Closed heat transfer system due to fluid circulation in industrial applications
• + Minimum mass temperature in a closed system of liquid: -50 ° C
• + Maximum mass temperature in a closed system of liquid: 120 ° C & nbsp;

MOLYDUVAL Celsius A 22 is based on PAOs, so that a lower temperature can be achieved than with mineral thermal oil.

FM HEAT TRANSFER FLUID 32

Heat transfer fluid for use in food manufacturing industry

FM HEAT TRANSFER FLUID 32 main applications:

• Heat transfer systems with a bulk oil temperature range of approximately -10 °C to max. +325 °C where the surface temperature of the heating elements (oil fi lm temperature) should not exceed +340 °C.

FM HEAT TRANSFER FLUID is designed for closed circuit and pressureless heat transfer systems. It is based on a careful blend of highly refi ned oils and additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of FM HEAT TRANSFER FLUID 32 drops automatically in larger quantities.

Q8 Gluck M

Advanced heat transfer oil

Applications Q8 Gluck M

Q8 Gluck M is used in closed heat transfer systems operating at bulk temperatures of max 330°C.

Your advantage! Price of Q8 Gluck M drops automatically in larger quantities.

Total Jarytherm BT 06

Synthetic heat transfer fluid, made from a blend of benzyl- and dibenzyltoluene isomers.

Applications Total Jarytherm BT 06

• Can operate from - 30°C up to + 280°C in the bulk ( up to + 300°C in a thin film) without air contact.
• Total Jarytherm BT 06 is recommended for heat transfer installations using thermal fluid circulation. It is particularly suited for installations combining heating and cooling cycles such as Pharmaceutical and Specialty Chemicals industries.

TOTAL JARYTHERM DBT

Synthetic heat transfer fluid, made from a blend of dibenzyltoluene isomers.

Applications TOTAL JARYTHERM DBT

• Operating from 0°C to + 350 °C in the bulk (370 °C in the film) without air contact. JARYTHERM® DBT is mainly used in the chemical and plastics transformation industries (barrel extruders).

Your advantage! Price of TOTAL JARYTHERM DBT drops automatically in larger quantities.