Klüber oil & grease lubricants

Klüber Structovis FHD

Mineral oil-based special lubricants

Application Klüber Structovis FHD

STRUCTOVIS HD lubricants are used for driving, control and conveyor chains. STRUCTOVIS BHD and BHD 75 S have proven particularly effective for the initial lubrication of steel link chains by the chain manufacturer.

Klüber ALTEMP Q NB 50

Lubricating and assembly paste

Application Klüber ALTEMP Q NB 50

ALTEMP Q NB 50 can be used for the assembly of frictional connections, e.g. annular springs or split taper sleeves, and positive connections, e.g. bearing seats, profiled guides, etc. The product has proven particularly successful in the lubrication of clamping chucks. High precision and constant clamping forces are essential requirements in chucks. Any decrease of the clamping force may cause tools or workpieces to become loose. ALTEMP Q NB 50 improves the sliding behavior of moving chuck components, enables constant clamping forces and may therefore be used in all types of chucks, such as scroll, cam and spiral chucks. It prevents stick-slip and protects against tribo- and fretting corrosion in frictional or positive connections. Furthermore, ALTEMP Q NB 50 is resistant to water and media, e.g. against cooling lubricants.

Klüber Klübersynth CHX 2-220

High-temperature chain oil for transport- and conveyor chains in the automotive industry

Application Klüber Klübersynth CHX 2-220

Klübersynth CHX 2-220 was developed for chain lubrication at high temperatures from 120 °C to approx. 250 °C. The product is used for the lubrication of the conveyor chain and the oven chain in cathodic immersion painting as well as for all other chain applications in the car body paint section.

Klüber DUOTEMPI PMY 45

Light-coloured high-pressure lubricating paste

Application Klüber DUOTEMPI PMY 45

As a lubricating paste: For low-speed (plain) bearings, guides, joints, bushes, eccentric units, seals, bolts, and hinges in all fields of plant and machine engineering. For automotive components such as gear shift gates, ball joints, seat rails, steering-knuckle pins or profile gears. As an assembly paste: For interference, transition, and loose fits. As a screw paste: For austenitic materials (A2-70) and the assembly of screws and bolts under normal temperature conditions.

Klübersynth GH 6-460

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-460

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Kluber Klübersynth UH1 6

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology

Application Kluber Klübersynth UH1 6

Klübersynth UH1 6 oil is used for the lubrication of highly loaded spur, bevel and planetary gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. Klübersynth UH1 6 oil was especially developed for the lubrication of worm gears with steel/bronze pairings. It can also be used for the lubrication of lifting, drive and transport chains.

Application notes Kluber Klübersynth UH1 6

Klübersynth UH1 6 can be applied by means of immersion, immersion circulation or injection.The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible. When using automatic lubricating systems, please note the manufacturer's instructions regarding the maximum permissible viscosity. The low-viscosity varieties are also used for oil mist lubrication.

Klüber Klüberfood NH1 C 4-58

Fully synthetic oil free of solids for conveyor chains in the beverage industry

Application Klüber Klüberfood NH1 C 4-58

Klüberfood NH1 C 4-58 is used for the lubrication of conveyor chain surfaces and guides made of plastic in beverage filling machines. It is designed to replace the use of high volumes of water-based suds which cause safety concerns and high wastewater treatment costs.

Klüber STABURAGS NBU 30 PTM

Lubricating and assembly grease

Application Klüber STABURAGS NBU 30 PTM

STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, e.g. in railway bogie assemblies. STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods. STABURAGS NBU 30 PTM faciliates assembly and disassembly of ABS sensors in vehicles.

Klüber Klüberfood NH1 CH 2-220 Plus

High-temperature chain oils for the food-processing industry

Application Klüber Klüberfood NH1 CH 2-220 Plus

The Klüberfood NH1 CH 2 Plus oil series has been designed for lubrication of all drive, control and transport chains subject to high temperatures and loads. They are particularly suitable for use in chain applications, in beverage can decorating, bakery ovens, as well as other high-temperature chain applications in the food industry. These oils are suitable for chain designs both with and without elastomer O-rings for slow, medium and highspeed chain applications such as those found in the beverage can manufacturing industry.

Klüber Klüberfood NH1 CH 2-260 Plus

High-temperature chain oils for the food-processing industry

Application Klüber Klüberfood NH1 CH 2-260 Plus

The Klüberfood NH1 CH 2 Plus oil series has been designed for lubrication of all drive, control and transport chains subject to high temperatures and loads. They are particularly suitable for use in chain applications, in beverage can decorating, bakery ovens, as well as other high-temperature chain applications in the food industry. These oils are suitable for chain designs both with and without elastomer O-rings for slow, medium and highspeed chain applications such as those found in the beverage can manufacturing industry.

Klüber Klüberbio EG 2-68

Environmentally compatible, synthetic high-performance gear oils

Application Klüber Klüberbio EG 2-68

Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.

Klüber Constant OY 220 K

Synthetic impregnating oils for sintered metal plain bearings

Application Klüber Constant OY 220 K

CONSTANT OY K oils are intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.

Klüber Constant OY 32 K

Synthetic impregnating oils for sintered metal plain bearings

Application Klüber Constant OY 32 K

CONSTANT OY K oils are intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.

Klüber Klüberoil 4 UH1-68 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-68 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

Klüber Klüberoil 4 UH1-46 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-46 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

Klüber Klübersynth MR 96-31

Special lubricant compatible with many elastomers and plastics

Application Klüber Klübersynth MR 96-31

Klübersynth MR 96-31 is used particularly for the lubrication of friction pairs involving non-polar polymers such as PP or PE, and elastomers such as EPDM. The lubricant is also compatible with POM (homo- and copolymers), PBT or PA 6.6. Klübersynth MR 96-31 is used, for example, in slideways and casings made of non-polar and amorphous polymers with a low degree of crystallisation. Further application examples are: Vehicle brakes, electric parking brake, small gears.

Klüber Klüberlub BE 41-542

Heavy-duty grease for high-load rolling bearings

Application Klüber Klüberlub BE 41-542

Typical Klüberlub BE 41-542 applications are in high-load rolling bearings operating at low to medium speeds such as for load rollers in rotary kilns for the cement industry, crane wheels, bucket wheel excavators, hammer crushers, hammer mills, work rolls in hot strip mills, cold pilger rolling mills, and rolling bearings subject to shock or pulsating stress.

Klüber POLYLUB GLY 801

Special synthetic lubricating greases for a wide application range

Application Klüber POLYLUB GLY 801

Vehicles Gearshift linkages, moving parts of the heating and ventilation system, shock absorber seals, tie rod elements, seat mechanisms, sun roof guides, pedals. Plain bearings Many types of plain bearing designs. POLYLUB GLY 151, 501, 801 prevent stick-slip to a large extent, particularly in applications where normally a hydrodynamic lubricating film cannot form. Gears Small electric gears with plastic-metal friction components, manual gears operating at very low sliding speeds. Pneumatic installations Pneumatic valves and cylinders with and without piston rod (for these applications, the upper service temperature should not exceed 130 °C). Seals Lubricating and sealing grease for various types of seals. The POLYLUB GLY 151, 501 and 801 lubricants are also suitable for many other plastic components subject to wear caused by relative movement against metal or plastic surfaces. Owing to good damping properties, especially of POLYLUB GLY 801 and 501, noise is considerably reduced.

Klüber Klübersynth EG 4-150

Synthetic high-performance gear oil

Application Klüber Klübersynth EG 4-150

Klübersynth EG 4 was especially developed for the lubrication of heavily loaded spur, bevel and planetary gears. It can also be used for the lubrication of worm gears. Klüberoil EG 4 can also be selected for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

Klüber Klüberspeed BF 72-23

High-speed lubricating grease

Application Klüber Klüberspeed BF 72-23

Klüberspeed BF 72-23 is primarily recommended for spindles in milling, grinding and drilling machines and lathes running at very high speeds and high permanent temperatures. Such high speeds are frequently encountered in motor-powered spindle bearings. Klüberspeed BF 72-23 is also suitable for other highspeed bearings as are found in power tools, electric motors, etc. As this grease has a higher mechanical stability than Klüberspeed BF 72-22, it is better suitable for applications involving a vertical or inclined shaft.