Klüber ISOFLEX LDS 18 SPECIAL A
97% supplied in 5 working days
Bank transfer or Credit Card (master card & visa) payment
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
UK Deliveries
incoterm DAP
QUESTIONS?
Klüber ISOFLEX LDS 18 SPECIAL A
Dynamically light, long-term lubricating grease
Application Klüber ISOFLEX LDS 18 SPECIAL A
ISOFLEX LDS 18 SPECIAL A is suitable for plain and rolling bearings operating at low temperatures and/or high speeds, for example in grinding spindles, machine tool spindles, spindle bearings, textile spindles, bearings in OE-spinning turbines, bearings in precision and optical equipment.
Performance, Features & Benefits of Klüber ISOFLEX LDS 18 SPECIAL A are:
- Long service life due to good corrosion protection as well as ageing and oxidation stability, hence cost savings
- Tried-and-tested for many years, especially at high speeds and low temperatures
- Low heating-up of bearings due to low lubricant friction leading to longer service lives
If you have any questions, please contact OlieOnline Technical Helpdesk
Product Description Klüber ISOFLEX LDS 18 SPECIAL A
ISOFLEX LDS 18 SPECIAL A is a dynamically light long-term grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. The product is resistant to ageing, oxidation and water, and it protects reliably against corrosion.
Typical Characteristics
| Product specifications : | Klüber ISOFLEX LDS 18 SPECIAL A | |
| Article number | 004013 | |
| Chemical composition, thickener | lithium soap | |
| Chemical composition, type of oil | mineral oil | |
| Chemical composition, type of oil | ester oil | |
| Lower service temperature | -50 °C / -58 °F | |
| Upper service temperature | 120 °C / 248 °F | |
| Colour space | yellow | |
| Texture | homogeneous | |
| Texture | short-fibred | |
| Density at 20 °C | approx. 0.88 g/cm³ | |
| Worked penetration, 25 °C, lower limit value | DIN ISO 2137 | 265 x 0.1 mm |
| Worked penetration, 25 °C, upper limit value | DIN ISO 2137 | 295 x 0.1 mm |
| Kinematic viscosity of the base oil, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 15 mm²/s |
| Kinematic viscosity of the base oil, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 3.5 mm²/s |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 4 000 mPas | |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 2 000 mPas | |
| Corrosion inhibiting properties of lubricating greases, (SKF-EMCOR), test duration: 1 week, distilled water |
DIN 51802 | 0 corrosion degree |
| Speed factor (n x dm) | approx. 1 000 000 mm/min | |
| Low-temperature torque, -60 °C, start | IP 186 | <= 1 000 mNm |
| Low-temperature torque, -60 °C, running | IP 186 | <= 100 mNm |
| Drop point, | DIN ISO 2176, IP 396 | >= 190 °C |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
The lubricant is applied by brush, spatula, grease gun or grease cartridge. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application.
Discover the benefits of OilOnline!
Are you looking to buy oil from OilOnline? Then you can take advantage of many benefits:
Our knowledge
is your strength!
At OilOnline, we have a team of passionate lubricant specialists with extensive knowledge and experience.
Detailed
advice
Our experts will assist you in choosing the best products, so you can get the most out of your vehicle or machine.
Uncompromising
Quality
At OilOnline, we only offer lubricants from globally renowned quality brands.
Save on
Lubricants
By ordering larger quantities, you can take advantage of price benefits at OilOnline.