Klüber
-
Klüber Paraliq P 12
Klüber Paraliq P 12
Lubricating oils for the food and pharmaceutical industries
Application Klüber Paraliq P 12
PARALIQ P 12 and P 40 can be used for machines in the foodprocessing and pharmaceutical industries requiring medically pure oils, e.g. spindles, joints, chains, gearwheels, plain bearings, pistons, guides and tubular tracks. The oils can also be used for corrosion protection. PARALIQ P 12 can also be used as a heat transfer oil in enclosed systems in the food-processing, pharmaceutical and cosmetics industries.
Learn More -
Klüber Paraliq 91
Klüber Paraliq 91
Synthetic lubricating oil for use in the food and pharmaceutical industries
Application Klüber Paraliq 91
PARALIQ 91 is used as release agent for baking tins and moulds in the food-processing industry. The lubricant can also be used as high-performance needle and sinker oil in textile machines as well as for deep-drawing or bending of packages for the pharmaceutical and foodprocessing industries. This special oil is tried-and-tested as release agent for moulds in blister machines used for the deep-drawing of film (bottom film).
Learn More -
Klüber Klüberbio LG 39-700 N
Klüber Klüberbio LG 39-700 N
Eco-compatible operating lubricant for open gear drives
Application Klüber Klüberbio LG 39-700 N
Klüberbio LG 39-700 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for sliding surfaces with high surface pressure. The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high load-carrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.
Learn More -
Klüber Presspate SEM 95/800 T
Klüber Presspate SEM 95/800 T
High-performance lubricants for cold forming of sheets and tubes
Application Klüber Presspate SEM 95/800 T
You may use PRESSPATE SEM 95/800 T and PRESSPATE TB for highly varied applications in cold metal forming, especially for sheet metal and tubes. This includes processes such as: drawing and deep drawing; bending; hydroforming; tube bending using a mandrel; calibrating sintered parts upon sintering Both products have been successfully used in the processing of alloys based on steel, stainless steel, brass, aluminium and titanium.
Learn More -
Klüber Microlube GB 00
Klüber MICROLUBE GB 00
Fluid gear grease
Application Klüber MICROLUBE GB 00
MICROLUBE GB 00 is suitable for the lubraction of rams in mechanical presses, heavy-duty oiltight spur and bevel gears (e.g. gear motors, small gears), worm gears with steel/ steel components as well as toothed couplings. It is also suitable for the lubrication of slideways, guides and large chain drives.
Learn More -
Klüber Klübersynth UH1 6-100
Klüber Klübersynth UH1 6-100
Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology
Application Klüber Klübersynth UH1 6-100
Klübersynth UH1 6 oil is used for the lubrication of highly loaded spur, bevel and planetary gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. Klübersynth UH1 6 oil was especially developed for the lubrication of worm gears with steel/bronze pairings. It can also be used for the lubrication of lifting, drive and transport chains.
Learn More -
Klüber Klüberalfa DH 3-350 N
Klüber Klüberalfa DH 3-350 N
Lubricating oil with good wetting properties for plastic friction points
Application KKlüber Klüberalfa DH 3-350 N
Klüberalfa DH 3 N can be used for the wetting of metals and synthetic material parts of various configurations. Due to their good material compatibility, these products should be your first choice for the vehicle interior. Application examples: – Contact surfaces with different material pairings in the dashboard: minimisation of unwanted noises – Impact, rubbing and sliding points inside cars, even of various material pairings – Sliding guides in the centre console, cup holder, navigation screen – Locking mechanism of trays, ventilation flaps, etc. General behaviour towards plastics and elastomers Perfluorinated polyether oils are generally regarded as neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Despite this, prior to a series application, the compatibility of the lubricant with the material with which it is to come into contact, must be confirmed.
Learn More -
Klüber Klüberbio LG 39-701 N
Klüber Klüberbio LG 39-701 N
Eco-compatible operating lubricant for open gear drives
Application Klüber Klüberbio LG 39-701 N
Klüberbio LG 39-701 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for sliding surfaces with high surface pressure. The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high load-carrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.
Learn More -
Klüber Syntheso D 68
Klüber Syntheso D 68
Synthetic high-temperature lubricating oils
Application Klüber Syntheso D 68
SYNTHESO D oils are used for the lubrication of friction points subject to high temperatures. They are also used as pressure fluids in high-temperature applications, and as heat carrier fluids. Owing to the base oil’s high pressure absorption capacity and good wear protection, SYNTHESO D oils are particularly suitable for hydraulic or heat transfer applications where lubricity has to be ensured at high temperatures.
Learn More -
Klüber Klüberbio AG 39-602
Klüber Klüberbio AG 39-602
Environmentally acceptable adhesive lubricant for open gears and steel cables
Application Klüber Klüberbio AG 39-602
Klüberbio AG 39-602 was developed for the lubrication of open pinion gears on winches and jack-up platforms, as well as steel cables in contact with water. The product can also be used in other maritime applications that require lubricants to have good water washout resistance, very good anti-corrosion resistance and/or good load-carrying capacity such as with low-speed plain bearings, guide rails and open winch gears.
Learn More -
Klüber STABURAGS NBU 8 EP
Klüber STABURAGS NBU 8 EP
Rolling bearing and high-pressure grease
Application Klüber STABURAGS NBU 8 EP
STABURAGS NBU 8 EP has proven efficient as a rolling bearing and high pressure grease protecting against wear. It is used in traction motors, journal bearings, electric motors, pumps, and tapered roller bearings.
Learn More -
Klüber Tyreno Fluid E-95V
Klüber Tyreno Fluid E-95V
for low and fine vacuum applications
Application Klüber Tyreno Fluid E-95V
Working fluid for mechanical backing pumps extracting aggressive gases and vapours, but not oxygen or halogens. Universal oil offering a high viscosity index, excellent condensate separation and dispersing effect. Klüber Tyreno Fluid E-95V achieves a final pump pressure of approx. 10–2 mbar measured in a double-stage backing pump.
Learn More -
Klüber Klübertec CM 6-100
Klüber Klübertec CM 6-100
High-performance oils for cold forming
Application Klüber Klübertec CM 6-100
Klübertec CM 6 oils may be used in many cold-forming applications as well as for blanking and shearing of thin or thick sheet metal. Examples of applications are: Forming under tensile or compressive conditions such as rolling or deep-drawing; Forming under bending conditions, hydro-forming; Precision blanking of aluminium or aluminium alloys (see application notes), nonferrous metals, steel or stainless steel.
Learn More -
Klüber Klüberfood 4 NH1-32
Klüber Klüberfood 4 NH1-32
Synthetic hydraulic oils for the food and pharmaceutical industries
Application Klüber Klüberfood 4 NH1-32
Klüberfood 4 NH 1 hydraulic oils are used especially in the food-processing and pharmaceutical industries.
Learn More -
Klüber Klüberbio RM 2-150
Klüber Klüberbio RM 2-150
Environmentally compatible, synthetic stern tube oils
Application Klüber Klüberbio RM 2-150
Klüberbio RM 2 oils were developed for the lubrication of propeller bushes made of white metal and propeller shaft seals. Klüberbio RM 2 oils are tested and approved by all leading propeller shaft seal manufacturers. Please contact Klüber Lubrication or the seal manufacturer for technical consultation on your specific seal-lubricant combination.
Learn More -
Klüber POLYLUB GA 352 P
Klüber POLYLUB GA 352 P
Adhesive long-term grease with good water resistance
Application Klüber POLYLUB GA 352 P
POLYLUB GA 352 P is used for the lubrication of rolling and plain bearings, racks, cylinder guides, pneumatic cylinders, load rollers and slideways. POLYLUB GA 352 P is suitable for machines and installations in the food-processing and related industries where contact with the food product is excluded.
Learn More -
Klüber PARALIQ GA 351
Klüber PARALIQ GA 351
Special lubricating grease for the food and pharmaceutical industries
Application Klüber PARALIQ GA 351
PARALIQ GA 351 can be used for all lubrication points in the food industry. Application examples: Rolling and plain bearings in machines of the food and pharmaceutical industries; Metering pistons in cup filling and sealing machines; Tubular tracks in slaughterhouses
Learn More -
Klüber Klüberfluid NH1 4-005
Klüber Klüberfluid NH1 4-005
Synthetic barrier fluid for mechanical seals
Application Klüber Klüberfluid NH1 4-005
Klüberfluid NH1 4-005 can be used as a barrier fluid in mechanical seals operating under inert gas conditions. Mechanical seals have been used in mixers, driers, mills, kneaders, reactors and pumps in the chemical and the pharmaceutical industry for many years. Klüber Lubrication offers a range of oils that were especially developed for use as a barrier medium in mechanical seals. The more the seal is stressed in terms of pressure, speed and heat, the lower should the oil's viscosity be. For naturally circulating barrier fluids, the selected oil viscosity is normally approx. 5 mm²/s, as is the case with Klüberfluid NH1 4-005. Which type of barrier fluid should be chosen depends on the type of seal elastomer as well as on the application's process conditions. For forced circulation, the oil should have a viscosity of 12 - 90 mm²/s. Klüber Lubrication offers solutions also for these cases. Our experts will be pleased to provide advice.
Learn More -
Klübersynth GH 6-220
Klübersynth GH 6-220
Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology
Application Klübersynth GH 6-220
Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains
Learn More -
Klüber Klüberplex BEM 34-132
Klüber Klüberplex BEM 34-132
Speciality rolling bearing grease for demanding applications
Application Klüber Klüberplex BEM 34-132
Klüberplex BEM 34-132 is used for ball bearings and linear guides, ball screws subject to oscillating motion, high loads and vibration. These may typically be found in: hub units (wheel bearings), shock absorber bearings, water pump bearings and cardan joint bushes in vehicles; guides in machine tools and working machines; linear bearings in wet processing zones of textile machines, paper-making machines, conveyors and pumps Klüberplex BEM 34-132 is also suitable as sealing grease for rolling bearings due to its excellent media resistance.
Learn More
Küber lubricants
High-performance Klüber oils and greases for optimal lubrication of assets. Resulting in higher reliability, less time spent on maintenance and lower lubricant consumption. With a lower cost to operate, fewer breakdowns, more performance, more output and a better result. Also food safe or biodegradable if required, with the official registrations and certifications.
What makes Klüber lubricants so good?
Klüber is the specialist for special greases and oils. I think there is no other brand with such a broad portfolio of lubricating greases as Klüber. Kluber's portfolio already includes more than 10,000 products. Therefore, you often see very high-quality and very specific products in their portfolio. The price of this specialist in lubricants is high, but fortunately very small packages are available.
My machine supplier prescribes Klüber lubricants. Should I use these?
Klüber has an extremely good relationship with these OEMs and has often looked very closely at the needs and requirements of these machine builders. Therefore, it is not always obvious to select a general product. In addition, warranty also plays an important role. If the consumption is not very high, we would save you the trouble of looking for an alternative.
Where can I buy Klüber oil in United Kingdom?
The easiest way is online! OlieOnline delivers Klüber oil and greases in the whole Benelux. They are specialised in business use, but the private individual can also buy directly from the wholesaler.
- Category
-
- Klüber Airpress (3)
- Klüber Altemp (1)
- Klüber Amblygon (1)
- Klüber Barrierta (11)
- Klüber Catenera (2)
- Klüber Centoplex (4)
- Klüber Constant (9)
- Klüber Grafloscon (6)
- Klüber Hotemp (6)
- Klüber Isoflex (21)
- Klüberalfa (13)
- Klüberbeta (4)
- Klüberbio (11)
- Klübercut (2)
- Klüberfluid (11)
- Klüberfood (21)
- Klüberlectric (2)
- Klüberlub (5)
- Klüberoil (13)
- Klüberoil 4 UH1 (9)
- Klüberpaste (5)
- Klüberpharma (2)
- Klüberplex (7)
- Klüberplus (1)
- Klüberpress (4)
- Klüberspeed (1)
- Klübersynth (26)
- Klübersynth EG (6)
- Klübersynth G (5)
- Klübersynth GEM (11)
- Klübersynth GH (14)
- Klübersynth UH1 (8)
- Klübertec (5)
- Klübertherm (2)
- Klübertop (1)
- Klüberquiet (2)
- Klüber Lamora (7)
- Klüber Madol (3)
- Klüber Microlube (5)
- Klüber Paraliq (9)
- Klüber Petamo (4)
- Klüber Polylub (4)
- Klüber Presspate (1)
- Klüber Primium (2)
- Klüber Quietsch (1)
- Klüber Silvertex (6)
- Klüber Staburags (9)
- Klüber Structovis (8)
- Klüber Summit (42)
- Klüber Syntheso (13)
- Klüber Tyreno (7)
- Klüber Unimoly (3)
- Klüber Unisilkon (11)
- Klüber Varilub (1)
- Klüber Wolfrakote (4)
- Klüber Zeliot (1)
- Viscosity
-
- 100 mm2/sec (7)
- 1000 mm2/sec (1)
- 100W (4)
- 150 mm2/sec (6)
- 1500 mm2/sec (2)
- 220 mm2/sec (7)
- 32 mm2/sec (2)
- 320 mm2/sec (5)
- 46 mm2/sec (5)
- 460 mm2/sec (10)
- 68 mm2/sec (17)
- 680 mm2/sec (1)
- NLGI 0 (2)
- NLGI 00 (1)
- NLGI 1 (3)
- NLGI 2 (6)
- Brand
-
- Klüber (411)
- ACEA DIN ISO OEM
-
- ABB HTGD 90117 (1)
- ACEA A1 (1)
- ACEA A5 (1)
- ACEA B4 (1)
| 9+ | Our customers value us  |
 Ian Adair |
"We like your site, it shows that you are experts in lubricants!" |
 Cris Scullion |
"You deliver quicker than our previous UK supplier!" |
| Stuart Wyatt |
"Surprise to us! We paid to much in the past" |
| View more reviews | |
