Klüber

Klüber Klüberoil 4 UH1-220 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-220 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

Klüber Klüberfood NH1 94-6000

Synthetic fluid gear grease for the food processing and pharmaceutical industries

Application Klüber Klüberfood NH1 94-6000

Klüberfood NH1 94-6000 was especially developed for applications in machines and installations of the foodprocessing and pharmaceutical industries where incidental contact with your product cannot be excluded. Klüberfood NH1 94-6000 is used e.g. as a fluid gear grease for the immersion lubrication of toothed and worm gears or chains that run more smoothly with a soft grease.

Klüber Klüberbio RM 2-100

Environmentally compatible, synthetic stern tube oils

Application Klüber Klüberbio RM 2-100

Klüberbio RM 2 oils were developed for the lubrication of propeller bushes made of white metal and propeller shaft seals. Klüberbio RM 2 oils are tested and approved by all leading propeller shaft seal manufacturers. Please contact Klüber Lubrication or the seal manufacturer for technical consultation on your specific seal-lubricant combination.

Klüber POLYLUB WH 2

Multi-purpose grease

Application Klüber POLYLUB WH 2

POLYLUB WH 2 is a multipurpose grease for a wide range of applications and is preferrably used for the lubrication of rolling and plain bearings, slideways, cylinder guides, rollers, cams, gears, racks, filling and capping machines, washing machines and transport systems.

Klüber Klübertherm CH 2-260

High-temperature oil

Application Klüber Klübertherm CH 2-260

Klübertherm CH 2-260 lubricates the chains/steel belts and chain carpets in continuous wood presses used for the manufacture of particle, MDF, HDF, THDF, OSB or LVL boards. Especially for the systems: ContiRoll® or contipressTM of Messrs. Siempelkamp or Conti-Panel-System (CPS) of Messrs. Dieffenbacher Other possible applications are: Oil-lubricated stenter chains in the textile industry, especially when operated at elevated temperatures for synthetic fabrics. Drive chains and transport chains for festoon dryers, festoon steamers and coating installations.

Klüber PETAMO GHY 443

High-temperature and long-term lubricant for rolling bearings subject to high loads

Application Klüber PETAMO GHY 443

For the initial and relubrication of rolling and plain bearings subject to high temperatures in general machinery, electric motors, load rollers in conveyors, roller bearings and continuous wood panel presses, load rollers in continuous casting machines and many other applications.

Klüber Klüberoil 4 UH1-150 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-150 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

Klüber Structovis FHD

Mineral oil-based special lubricants

Application Klüber Structovis FHD

STRUCTOVIS HD lubricants are used for driving, control and conveyor chains. STRUCTOVIS BHD and BHD 75 S have proven particularly effective for the initial lubrication of steel link chains by the chain manufacturer.

Klübersynth GH 6-460

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-460

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Kluber Klübersynth UH1 6

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology

Application Kluber Klübersynth UH1 6

Klübersynth UH1 6 oil is used for the lubrication of highly loaded spur, bevel and planetary gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. Klübersynth UH1 6 oil was especially developed for the lubrication of worm gears with steel/bronze pairings. It can also be used for the lubrication of lifting, drive and transport chains.

Application notes Kluber Klübersynth UH1 6

Klübersynth UH1 6 can be applied by means of immersion, immersion circulation or injection.The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible. When using automatic lubricating systems, please note the manufacturer's instructions regarding the maximum permissible viscosity. The low-viscosity varieties are also used for oil mist lubrication.

Klüber Klüberfood NH1 C 4-58

Fully synthetic oil free of solids for conveyor chains in the beverage industry

Application Klüber Klüberfood NH1 C 4-58

Klüberfood NH1 C 4-58 is used for the lubrication of conveyor chain surfaces and guides made of plastic in beverage filling machines. It is designed to replace the use of high volumes of water-based suds which cause safety concerns and high wastewater treatment costs.

Klüber ISOFLEX NBU 15

Spindle bearing grease

Application Klüber ISOFLEX NBU 15

ISOFLEX NBU 15 is primarily used for spindle bearings and high-speed plain bearings, e.g. in machine tools and textile machines. Further applications are in threaded spindles, ball screws operating under high loads, running gear bearings, as a long-term grease in cableway bearings and in precision engineering. It may also be used for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical valve actuators).

Klüber Klüberfood NH1 CH 2-220 Plus

High-temperature chain oils for the food-processing industry

Application Klüber Klüberfood NH1 CH 2-220 Plus

The Klüberfood NH1 CH 2 Plus oil series has been designed for lubrication of all drive, control and transport chains subject to high temperatures and loads. They are particularly suitable for use in chain applications, in beverage can decorating, bakery ovens, as well as other high-temperature chain applications in the food industry. These oils are suitable for chain designs both with and without elastomer O-rings for slow, medium and highspeed chain applications such as those found in the beverage can manufacturing industry.

Klüber Klüberfood NH1 CH 2-260 Plus

High-temperature chain oils for the food-processing industry

Application Klüber Klüberfood NH1 CH 2-260 Plus

The Klüberfood NH1 CH 2 Plus oil series has been designed for lubrication of all drive, control and transport chains subject to high temperatures and loads. They are particularly suitable for use in chain applications, in beverage can decorating, bakery ovens, as well as other high-temperature chain applications in the food industry. These oils are suitable for chain designs both with and without elastomer O-rings for slow, medium and highspeed chain applications such as those found in the beverage can manufacturing industry.

Klüber Constant OY 32 K

Synthetic impregnating oils for sintered metal plain bearings

Application Klüber Constant OY 32 K

CONSTANT OY K oils are intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.

Klüber Constant OY 46 K

Synthetic impregnating oils for sintered metal plain bearings

Application Klüber Constant OY 46 K

CONSTANT OY K oils are intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.

Klüber Klüberoil 4 UH1-68 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-68 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

Klüber Klübersynth MR 96-31

Special lubricant compatible with many elastomers and plastics

Application Klüber Klübersynth MR 96-31

Klübersynth MR 96-31 is used particularly for the lubrication of friction pairs involving non-polar polymers such as PP or PE, and elastomers such as EPDM. The lubricant is also compatible with POM (homo- and copolymers), PBT or PA 6.6. Klübersynth MR 96-31 is used, for example, in slideways and casings made of non-polar and amorphous polymers with a low degree of crystallisation. Further application examples are: Vehicle brakes, electric parking brake, small gears.