Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Castrol Aircol

6 Item(s)

Set Descending Direction
per page

  • Castrol Aircol PD 100

    CASTROL Aircol PD 100

    Rotary Screw Compressor Lubricant

    Application CASTROL Aircol PD 100

    Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

    Learn More

    Starting at: Excl. Tax: £120.52 Incl. Tax: £145.83

  • Castrol Aircol PD 68

    CASTROL Aircol PD 68

    Rotary Screw Compressor Lubricant

    Application CASTROL Aircol PD 68

    Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

    Learn More

    Starting at: Excl. Tax: £124.08 Incl. Tax: £150.14

  • Castrol Aircol MR 46

    CASTROL Aircol MR 46

    Rotary Screw Compressor Lubricant

    Application CASTROL Aircol MR 46

    Aircol MR incorporates a carefully balanced antioxidant system providing improved oxidative and thermal stability giving “extended” service life for both oil flooded and oil injected rotary screw compressors operating continuously at air discharge temperatures up to 90ºC. The product has been designed to meet service drain intervals of 4000 hours. For intermittent or continuous operation with air discharge temperatures above 90ºC the manufacturers’ standard oil change periods should be used. The Aircol MR range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol MR is classified as follows: ISO 6743-3 Compressor Oils; DAG and DAH for rotary air compressors. Aircol MR grades meet the requirements of: Atlas Copco for 4000 hour oil life.

    of CASTROL Aircol MR 46 drops automatically in larger quantities. Learn More

    Starting at: Excl. Tax: £153.44 Incl. Tax: £185.66

  • Castrol Aircol SR 46

    CASTROL Aircol SR 46

    Synthetic air compressor lubricant

    Application CASTROL Aircol SR 46

    Aircol SR is suitable for use in oil flooded rotary screw compressors and is classified as follows: DIN 51506 classification- VDL; ISO 6743/3-DAG, DAH and DAJ for rotary air compressors. Aircol SR grades meet the requirements of: Atlas Copco 8000 hour oil drain interval; Kaeser

    Learn More

    Starting at: Excl. Tax: £239.47 Incl. Tax: £289.76

  • Castrol Aircol SN 68

    CASTROL Aircol SN 68

    Synthetic Air Compressor Lubricant

    Application CASTROL Aircol SN 68

    Castrol Aircol SN compressor lubricants are formulated to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

    Learn More

    Starting at: Excl. Tax: £279.31 Incl. Tax: £337.97

  • Castrol Aircol SN 100

    CASTROL Aircol SN 100

    Synthetic Air Compressor Lubricant

    Application CASTROL Aircol SN 100

    Castrol Aircol SN compressor lubricants are formulated to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

    Learn More

    Starting at: Excl. Tax: £296.44 Incl. Tax: £358.69

6 Item(s)

Set Descending Direction
per page