Castrol Radicool
-
Castrol Radicool NF Premix
Quick orderingMore infoCASTROL Radicool NF Premix
Ready to use engine coolant and antifreeze
Application CASTROL Radicool NF Premix
Castrol Radicool NF premix has been developed using Hybrid Additive Technology to provide total protection for modern engine radiator systems, cylinder block heads, water pumps and heat exchangers . In the majority of cases, coolants are not compatible and should not be mixed with other coolants unless directed by the equipment manufacturer. If using Castrol Radicool NF Premix for the first time, ensure that the cooling system has been adequately flushed with clean water before use.
Show moreStarting at: £ 4.50 / L -
Castrol Radicool NF
Quick orderingMore infoCASTROL Radicool NF
Antifreeze coolant
Application CCASTROL Radicool NF
Castrol Radicool NF has been developed to meet the growing demand from engine and vehicle manufacturers for a higher performance coolant that minimises environmental impact. It provides excellent protection against corrosion, and because it contains no phosphate, the problems of deposits in some modern performance engines are eliminated. In addition to providing excellent corrosion and low temperature protection, the use of the recommended level of anti-freeze will significantly reduce the likelihood of wet cylinder liner pitting due to " cavitation erosion". Cavitation erosion is caused by the implosion of air bubbles present in the coolant, which are attracted to the liner outer surface. These bubbles implode, resulting in the removal of minute amounts of liner material - this, if allowed to continue unchecked, will result in liner porosity and severe engine damage.
Show moreStarting at: £ 5.43 / L -
Castrol Radicool SF Premix
Quick orderingMore infoCASTROL Radicool SF Premix
Ready to use antifreeze coolant
Application CASTROL Radicool SF Premix
The special inhibitor package used in Castrol Radicool SF Premix enables longer drain intervals with excellent protection against corrosion, cooling system blockage, overheating and freezing. It is especially suitable for use in engines employing cast iron, aluminium , copper or combinations of these metals used in modern engine designs. It is also compatible with all standard rubber hoses, gaskets and seals used within the cooling system. Castrol Radicool SF Premix possesses a longer operational life by allowing extended drain intervals of up to 5 years. Longer drain intervals mean reduced cost and less possibility of harm to the environment. Castrol Radicool SF Premix provides excellent protection against cavitation corrosion and effective water pump lubrication, reducing wear and noise. The additive technology used in Castrol Radicool SF Premix prevents the build up of calcium deposits (scale) from use of hard water, thereby reducing possibility of radiator blocking and restricted flow of coolant. This technology also improves the fluids heat transfer properties ensuring engines run at optimum temperatures. Castrol Radicool SF Premix contains a bittering agent to deter from accidental ingestion
Show more£ 4.18 / L -
Castrol Radicool SF
Quick orderingMore infoCASTROL Radicool SF
Antifreeze Coolant
Application CASTROL Radicool SF
The special inhibitor package used in Castrol Radicool SF enables longer drain intervals with excellent protection against corrosion, cooling system blockage, overheating and freezing. It is especially suitable for use in engines employing cast iron, aluminium , copper or combinations of these metals used in modern engine designs. It is also compatible with all standard rubber hoses, gaskets and seals used within the cooling system. Castrol Radicool SF possesses a longer operational life by allowing extended drain intervals of 3 years plus. Longer drain intervals mean reduced cost and less possibility of harm to the environment. Castrol Radicool SF provides excellent protection against cavitation corrosion and effective water pump lubrication , reducing wear and noise. The additive technology used in Castrol Radicool SF prevents the build up of calcium deposits (scale) from use of hard water, thereby reducing possibility of radiator blocking and restricted flow of coolant. This technology also improves the fluids heat transfer properties ensuring engines run at optimum temperatures. Castrol Radicool SF is approved by a number of OEM's including Merceded Benz, Volkswagon, MAN and Ford. It is also recommended against the following vehicle manufacturer's specifications ; General Motors GM 6277M, Deutz , Cummins IS series and N14 engines, Jenbacher, Komatsu, Renault Type D, Jaguar CMR 8229 and MTU MTL 5048 Series 2000C&I. Castrol Radicool SF contains a bittering agent to deter from accidental ingestion
Show more£ 5.48 / L
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt