Your sector

Shell Rimula R6 LM 10W-40

Fully Synthetic Heavy Duty Diesel Engine Oil 10W40

Shell Rimula R6 LM 10W-40 main applications:

• On-highway heavy duty applications
• Low emission engine use
• CNG engine oil performance

Shell Rimula R6 LM 10W40 oil features “Low-SAPS” additive technology and unique anti-wear system. Protective power is enhanced with synthetic technology, resulting in maintenance saving long drain capability, exceptional wear and cleanliness performance.

Pay attention! Price of Shell Rimula R6 LM 10W-40 drops automatically in larger quantities.

Shell Morlina S2 B 150 Previously Morlina 150

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 150 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 150 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 150 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 150 drops automatically with larger quantities.

Shell Morlina S2 B 220 Previously Morlina 220

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 220 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 220 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 220 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 220 drops automatically with larger quantities.

Shell Helix Ultra Racing 10W-60 

Fully synthetic motor oil - Shell's most advanced formulation for high-performance engines

Shell Helix Ultra Racing 10W-60 main applications:

• Extreme-performance engines and racing conditions can cause excessive wear of bearings and other engine components. Shell Helix Ultra Racing has been formulated with a higher viscosity to provide exceptional bearing protection under extreme performance and racing conditions compared with lower viscosity oils.
• Shell Helix Ultra Racing is designed for modified engines and racing engines using gasoline, diesel and gas, and it is also suitable for biodiesel and gasoline/ethanol blends.
   

Designed to meet the demanding requirements of particular high-performance engines, including those requiring API SN or ACEA A3/B4.

Please note!! Price of Shell Helix Ultra Racing 10W-60 drops automatically in larger quantities.

Shell Omala S4 WE 320 Previous Name: Shell Tivela S 320

Advanced Synthetic Industrial Gear Oil

Shell Omala S4 WE 320 main applications:

• Enclosed industrial worm gear systems
• Extended life systems
• Other applications

Shell Omala S4 WE 320 is an advanced synthetic heavy duty industrial worm drive gear oil formulated using specially selected polyalkylene glycol base fluids and additives. It offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting.

Pay attention! Price of Shell Omala S4 WE 320 drops automatically in larger quantities.

Shell Omala S4 WE 150 Previous Name: Shell Tivela S 150

Advanced Synthetic Industrial Gear Oil

Shell Omala S4 WE 150 main applications:

• Enclosed industrial worm gear systems
• Extended life systems
• Other applications

Shell Omala S4 WE 150 is an advanced synthetic heavy duty industrial worm drive gear oil formulated using specially selected polyalkylene glycol base fluids and additives. It offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting.

Pay attention! Price of Shell Omala S4 WE 150 drops automatically in larger quantities.

Shell Omala S4 WE 460 Previous Name: Shell Tivela S 460

Advanced Synthetic Industrial Gear Oil

Shell Omala S4 WE 460 main applications:

• Enclosed industrial worm gear systems
• Extended life systems
• Other applications

Shell Omala S4 WE 460 is an advanced synthetic heavy duty industrial worm drive gear oil formulated using specially selected polyalkylene glycol base fluids and additives. It offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting.

Pay attention! Price of Shell Omala S4 WE 460 drops automatically in larger quantities.

Shell Omala S4 WE 220 Previous Name: Shell Tivela S 220

Advanced Synthetic Industrial Gear Oil

Shell Omala S4 WE 220 main applications:

• Enclosed industrial worm gear systems
• Extended life systems
• Other applications

Shell Omala S4 WE 220 is an advanced synthetic heavy duty industrial worm drive gear oil formulated using specially selected polyalkylene glycol base fluids and additives. It offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting.

Pay attention! Price of Shell Omala S4 WE 220 drops automatically in larger quantities.

Foodgrade - Fuchs Cassida Fluid Silicone

Properties

Silicone-based, fully synthetic, multi-purpose fluid.

Thermal stability up to 250 °C.

Excellent adhesive properties minimise fling-off in use and wash-off by both cold and hot water.

Readily displaces water.

Formulated for use on metal-to-non-metal or non-metal-to non-metal contact surfaces.

Application 

For lubrication of conveyors; slow rotating machinery;

Small, slow-speed bearings and pivot points found in equipment in the food industry.

FM HEAT TRANSFER FLUID 32

Heat transfer fluid for use in food manufacturing industry

FM HEAT TRANSFER FLUID 32 main applications:

• Heat transfer systems with a bulk oil temperature range of approximately -10 °C to max. +325 °C where the surface temperature of the heating elements (oil fi lm temperature) should not exceed +340 °C.

FM HEAT TRANSFER FLUID is designed for closed circuit and pressureless heat transfer systems. It is based on a careful blend of highly refi ned oils and additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of FM HEAT TRANSFER FLUID 32 drops automatically in larger quantities.

CASSIDA FLUID WG 220

High performance, synthetic gear lubricant for worm gear boxes used in the food & beverage processing equipment

CASSIDA FLUID WG 220 main applications:

• Especially recommended for use in worm gears and applications where excellent thermal stability is required
• Lubrication of enclosed gear boxes used in the food industry
• High load carrying capability, for extreme pressure applications

CASSIDA FLUID WG 220, 320, 460 and 680 are high performance, anti-wear gear oils for the lubrication of worm gears, highly loaded gears and applications where high resistance to micro-pitting is needed, for the use in food and beverage processing equipment. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID WG 220 drops automatically in larger quantities.

CASSIDA FLUID WG 320

High performance, synthetic gear lubricant for worm gear boxes used in the food & beverage processing equipment

CASSIDA FLUID WG 320 main applications:

• Especially recommended for use in worm gears and applications where excellent thermal stability is required
• Lubrication of enclosed gear boxes used in the food industry
• High load carrying capability, for extreme pressure applications

CASSIDA FLUID WG 320 are high performance, anti-wear gear oils for the lubrication of worm gears, highly loaded gears and applications where high resistance to micro-pitting is needed, for the use in food and beverage processing equipment. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID WG 320 drops automatically in larger quantities.

Shell Risella X 415

GtL Technical White Oil

Shell Morlina S1 B 100 Previous Name: Vitrea M

Industrial Bearing & Circulating Oils

Shell Morlina S1 B 100 main applications:

• Machine circulation systems
• Oil lubricated bearings Suitable for most plain and rolling element bearings in general industrial applications
• Roll-neck bearings
• Enclosed industrial gear systems Low or moderately loaded enclosed gears where EP performance is not required.

Shell Morlina S1 B oils are high performance oils designed to provide excellent protection for most industrial bearing and circulating oil system applications, particularly those processes where water shedding (demulsification) is important for the life of the equipment. Meets the most basic requirements of the Morgan standard for common bearing oils

Please note!! Price of Shell Morlina S1 B 100 drops automatically in larger quantities.

Shell Morlina S1 B 220 previously Shell Vitrea 220

Industrial Bearing & Circulating Oil

Application Shell Morlina S1 B 220

Machine circulation systems

Oil lubricated bearings. Suitable for most plain and rolling element bearings in general industrial applications

Roll-neck bearings

Enclosed industrial gear systems. Low or moderately loaded enclosed gears where EP performance is not required

Shell Morlina S1 B 150 previously Shell Vitrea 150

Industrial Bearing & Circulating Oils

Application Shell Morlina S1 B 150

Machine circulation systems

Oil lubricated bearings. Suitable for most plain and rolling element bearings in general industrial applications.

Roll-neck bearings

Enclosed industrial gear systems. Low or moderately loaded enclosed gears where EP performance is not required