Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Fuchs Cassida Fluid WG 220 - Foodgrade

QTY Size Liter price ex. VAT Price ex. VAT Price Incl. VAT
- + Pail 22L £ 0,00 £ 532,81 £ 0,00
Total
£ 0,00

CASSIDA FLUID WG 220

High performance, synthetic gear lubricant for worm gear boxes used in the food & beverage processing equipment

CASSIDA FLUID WG 220 main applications:

  • Especially recommended for use in worm gears and applications where excellent thermal stability is required
  • Lubrication of enclosed gear boxes used in the food industry
  • High load carrying capability, for extreme pressure applications

CASSIDA FLUID WG 220, 320, 460 and 680 are high performance, anti-wear gear oils for the lubrication of worm gears, highly loaded gears and applications where high resistance to micro-pitting is needed, for the use in food and beverage processing equipment. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID WG 220 drops automatically in larger quantities.

Product Description

Details

CASSIDA FLUID WG 220 Performance, Features & Benefits:

Registered by NSF (Class H1) for use where there is potential for incidental food contact. Products contain only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.

  • + High resistance to micro-pitting
  • + Neutral odour and taste
  • + High viscosity index: Maintains higher viscosities at higher temperatures, giving thicker oil films under difficult conditions
  • + CASSIDA FLUID WG provides excellent thermal stability, load carrying properties and corrosion protection. Resistant to the formation of harmful oxidation products
  • + Exceptional low friction providing efficient power transmission. Measured worm gear efficiency is high relative to other oils
  • + Water solubility makes CASSIDA FLUID WG ideal for use in situations where equipment gets routinely cleaned before and after use and where some water might penetrate into the lubricant
  • + Does NOT mix with mineral oils or PAO
     

Seal & Paint Compatibility of CASSIDA FLUID WG 220

Compatible with most of the elastomers, gaskets and seals normally used in food machinery lubrication systems. Nitrile rubber (NBR), Fluoro-Silicone or Vinyl- Methyl Polysiloxane (Q) are recommended especially where high temperatures are involved. Polyurethane based elastomers, leather, cork, asbestos paper and board should be avoided.
 

Note: see warning about seal shrinkage in section on change-over procedures. Some ordinary industrial paints soften in the presence of CASSIDA FLUID WG. Internal gearbox surfaces should ideally be unpainted or coated with resistant material such as two-part epoxy formulations.

Synthetic lubricant

  • Does not contain natural products derived from animals or genetically modified organisms (GMO)
  • Does not contain any allergenic or intoleranceinducing substances as specified in Annex IIIa of EC directive 2003/89/EC
  • Suitable for use where vegetarian and ‘nutfree’ food is prepared
  • Biostatic; does not promote the growth of bacteria or fungal organisms
     

Change over procedures

When changing from a lubricant based on mineral oil or PAO, the following procedure must be followed: The equipment should be at normal operating temperature then the oil drained off as fully as possible. Special attention should be paid to reservoirs, lines etc. where oil may be trapped. Then the system must be flushed with the new lubricant, which should then be drained before refilling with fresh, new lubricant. Note: Seals previously exposed to mineral oils may shrink when exposed to CASSIDA FLUID WG. This can result in oil leaks. It may therefore sometimes be necessary to replace them.
 

Approvals & Recommendations

This is an ongoing process, please contact your local partner for any updates.
 

Specifications & Certificates

  • NSF H1 registered
  • Kosher
  • Halal
  • DIN 51517 CLP
  • ISO 6743/6 L-CKD, CKE
     

"Incidental Food contact"

Registered by NSF (Class H1) and meets the USDA H1 guidelines (1998) for lubricants for use where there is a potential for incidental food contact. Made only from substances permitted under the US FDA Title 21 CFR 178.3570, 178.3620 and/or those generally regarded as safe (US 21 CFR 182) for use in food grade lubricants. To comply with the requirements of US 21 CFR 178.3570, contact with food should be avoided where possible. In the case of incidental food contact, the concentration of this product in the food must not exceed 10 parts per million (10mg/kg of foodstuff). In locations and/or applications where local legislation does not specify maximum concentration limits, it is recommended that this same 10 ppm limit be observed, as up to this concentration CASSIDA FLUID WG will not impart undesirable taste, odour or colour to food, nor will cause adverse health effects. Consistent with good manufacturing practice, use only the amount necessary to achieve correct lubrication and take appropriate corrective action should excessive incidental contact with food be detected.
 

Protect the environment

Take used lubricants and empty packs to an authorised collection point. Do not discharge into drains, soil or water.

Health & Safety

Based on information available, CASSIDA FLUID WG is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained. As for all oils, prolonged or repeated contact with the skin should be avoided. For further information refer to the appropriate Material Safety Data Sheet.
 

Handling & storage

All food grade lubricants should be stored separately from other lubricants, chemical substances and foodstuffs and out of direct sunlight or other heat sources. Store between 0°C and 40°C. Provided that the product has been stored under these conditions we recommend that the product be used within 5 years from the date of manufacture. Accept for use new CASSIDA FLUID WG only if the manufacturer's seal is intact. Before opening the pack, ensure the area around the closure is clean. It is recommended that it be cleaned with potable water and then dried with a clean cloth before opening. Record the date the seal was broken. To prevent product contamination, always close the package after use. Upon opening a pack, the product must be used within 2 years (or within 5 years of date manufacture, whichever is the sooner).

If you have any questions, please contact OlieOnline Technical Helpdesk
 

Typical Physical Characteristics of CASSIDA FLUID WG 220

CASSIDA FLUID WG 220

 

 

Property

Test method

 

NSF Registration Number

 

133399

Colour

 

Clear, amber

Density at 15°C kg/m3

ISO 12185

1057

Flashpoint °C

ISO 2592

249

Pourpoint °C

ISO 3016

-42

Kin. Visc. at 40°C mm2/s

ISO 3104

227

Kin. Visc. at 100°C mm2/s

ISO 3104

41.9

Viscosity index 

ISO 2909

240

FZG-Test A/8.3/90
Failure Load Stage

ISO 14635-1

>12

Is Shell Cassida Fluid WG 220 the same as Fuchs Cassida Fluid WG 220?

Fuchs Cassida are speciality lubricants designed for use in the food industry. Fuchs Cassida products have the same properties as Shell Cassida because Fuchs acquired Shell's food-safe line in 2008. They are widely used in the food and beverage industry. However, it is important to choose the right lubricant based on the specific application and equipment requirements.

What are the main properties of Fuchs Cassida Fluid WG 220?

Fuchs Cassida Fluid WG 220 is a special lubricating oil developed for use in the food and beverage industry. Some important properties of this oil include excellent lubrication, good thermal stability and water resistance. The lubricant provides efficient lubrication of various machine parts, such as bearings, gears and other moving parts. Cassida Fluid WG 220 has good thermal stability, so it retains its lubricating properties at high temperatures that are common in the food industry. In addition, it also offers good resistance to water, making it suitable for use in humid environments.

Where can I buy Fuchs Cassida Fluid WG 220?

OlieOnline is the largest online lubricant webshop with only worldwide well-known brands including Fuchs Cassida Fluid WG 220. OlieOnline customers appreciate the convenience and time-saving of being able to buy lubricants online 24/7 at a competitive price. Questions no problem: Knowledge is our strength! www.olieonline.co.uk

FAQ

Questions and Answers

Add your question

There are no entries.


Additional Information

Additional Information

Brand Fuchs
ACEA DIN ISO OEM DIN 51517-3 CLP, FDA 178.3620, FDA 21 CFR 178.85, FDA 21 CFR 182, FDA CFR 178.3570, Halal, ISO 6743-6 L-CKD, Koosjer, NSF H1
OEM Approval No

You may also be interested in the following product(s)

Fuchs Cassida Fluid GL 220 - Foodgrade

Fuchs Cassida Fluid GL 220 - Foodgrade

Starting at: Excl. Tax: £351.61 Incl. Tax: £351.61

Mobil SHC Cibus 220

Mobil SHC Cibus 220

Starting at: Excl. Tax: £225.45 Incl. Tax: £225.45

Total Nevastane EP 220

Total Nevastane EP 220

Starting at: Excl. Tax: £148.76 Incl. Tax: £148.76

Total Nevastane XSH 220

Total Nevastane XSH 220

Starting at: Excl. Tax: £231.32 Incl. Tax: £231.32

Castrol Optileb GT 220

Castrol Optileb GT 220

Starting at: Excl. Tax: £369.25 Incl. Tax: £369.25