Lubricants

Klüber Klüberoil GEM 1-320 N

High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology

Application Klüber Klüberoil GEM 1-320 N

Klüberoil GEM 1 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

Klübersynth G 4-220

Synthetic high-performance gear oil

Application Klübersynth G 4-220

Klübersynth G 4 was especially developed for the lubrication of spur, bevel and planetary gears. It can also be used for plain and rolling bearings.

FUCHS Cassida Grease GTX 0

Specialty synthetic heavy-duty greases for food and beverage processing equipment

Application FUCHS Cassida Grease GTX 0

Lubrication of steam dryers, electric motors, pumps, conveyors, mixers, gear units and bearings. Low to medium speed bearings operating under adverse conditions. Heavy-loaded and shock-loaded applications. May also be used as protective anti-rust film and as release agent on gaskets and seals of tank closures

Shell Naturelle Grease S2 A600P 1.5 previously Naturelle S2 Wirerope lubricant A

Special Purpose Biodegradable Special Application, Wire Rope and Open Gear Lubricant

Application Shell Naturelle Grease S2 A600P 1.5

Wire ropes and cables, fair leads, crane and davit wires Open gears, and low speed plain bearings (less than 500 rpm). Rudder stocks, rudder trunk voids, propeller caps. Dredger bucket wheels. Can be used in a variety of equipment that requires the lubricant to have good water resistance and load carrying ability

Aeroshell Grease 33

Synthetic grease for aircraft

Application Aeroshell Grease 33

For many years aircraft operators have been seeking to rationalise the greases used on aircraft and to reduce the number of different greases in their inventories. Recently Boeing began research on a new, general purpose, corrosion-inhibiting grease. The aim was for a non-clay based grease that would provide longer life for components and mechanisms and possess improved wear and corrosion resistance. This led to the introduction of the new Boeing Specification BMS 3-33. Owing to the wide range of operating temperatures, loads and other environmental conditions required for various aircraft components, several different types of grease with different desirable properties are used during routine lubrication of aircraft components. Boeing, in developing their BMS 3-33 specification, took account of the properties of the different grease types used on aircraft and wrote a specification for a grease which would provide improved performance and which could be used in the widest possible range of grease applications. AeroShell Grease 33 is approved to BMS 3-33C and offers the improved performance properties required by this specification. AeroShell Grease 33 can be used for routine lubrication on Boeing aircraft where MIL-PRF-23827C or BMS 3-24 is specified. AeroShell Grease 33 can also be used in some applications on Boeing aircraft which require use of MIL-G21164. Other applications on Boeing aircraft which require use of MIL-G-21164 and other greases are being reviewed and in due course Boeing will issue details of the full range of applications. For the current status, refer to the latest issue of Boeing Service Letter "BMS 3-33C General Purpose Aircraft Grease". AeroShell Grease 33 can be used for routine lubrication in applications where MIL-PRF-23827C is specified on aircraft manufactured by McDonnell Douglas, Airbus, BAe Regional Aircraft, Canadair, Lockheed, Embraer, Fokker and Gulfstream (except for wheel bearings, applications above 121°C and sliding applications requiring molybdenum disulphide). Other aircraft manufacturers are evaluating AeroShell Grease 33 with the aim of approving it for use on their aircraft. Operators should regularly check with these manufacturers for the latest status. Use of AeroShell Grease 33 can provide operators with the following benefits: Reduced inventories; Reduced maintenance labour costs; Less chance of product mis-application

Klüber Klüberlectric BQ 72-72

Electroconductive low-noise rolling bearing grease for long-term lubrication

Application Klüber Klüberlectric BQ 72-72

Klüberlectric BQ 72-72 is primarily used for the long-term lubrication of capped or sealed ball bearings. Many of them are components of speed-controlled electric motors, generators or fans, or they operate in automobile applications where long service life has to be attained at above-average permanent temperatures and noise must be kept under control.

RENISO TRITON SE 170

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SE 170 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SE 170 drops automatically in larger quantities.

Klüber Klüberlub BVH 71-461

High-temperature lubricating grease for bearings and valves

Application Klüber Klüberlub BVH 71-461

Klüberlub BVH 71-461 is suitable for rolling bearings subject to high temperatures, shock loads and/or aggressive liquids or active detergents. It has proven effective in electric motors, pumps and fans. Klüberlub BVH 71-461 is also suitable for plain bearings operating under mixed friction conditions, where it reduces the temperature and friction in the friction points. Its high efficiency under extreme conditions makes Klüberlub BVH 71-461 an ideal grease for many applications in the base materials and construction industries, iron and steelworks, as well as coke ovens (gas valve grease).

Q8 Gluck M

Advanced heat transfer oil

Applications Q8 Gluck M

Q8 Gluck M is used in closed heat transfer systems operating at bulk temperatures of max 330°C.

Your advantage! Price of Q8 Gluck M drops automatically in larger quantities.

Klüber Paraliq P 100

Lubricating oils for the food-processing and pharmaceutical industries

Application Klüber Paraliq P 100

For all oil-lubricated friction points in the food-processing and pharmaceutical industries, e.g. gears, bearings, chains, spindles, joints. PARALIQ P 68 is also suitable for deep-drawing of aluminium foils. PARALIQ P 1500 can also be used for the lubrication of lifting, drive and conveyor chains.

Carix Premium Ready To Use -38C

Blue Anti-freeze with Corrosion Protection down to -38C

Carix Premium Ready To Use engine coolant is based on ethylene glycol. It contains a hybrid blend of corrosion inhibitors with salts based on organic acids and silicates. Carix Premium Diluted does not contain nitrites, amines or phosphates.

Carix Premium Ready To Use is designed to protect car truck and bus engines from corrosion and freeze damage. It contains a blend of inibitors designed to provide a high level of corrosion protection for engine components such as radiators, cylinder blocks/heads and water pumps.

It more than meets the requirements of the following standards: ASTM D3306, BS 6580:2010, AFNOR NF R15-601, ASTM 4985, SAE J1034 and ÖNORM V5123.

Klüber Paraliq P 460

Lubricating oils for the food-processing and pharmaceutical industries

Application Klüber Paraliq P 460

For all oil-lubricated friction points in the food-processing and pharmaceutical industries, e.g. gears, bearings, chains, spindles, joints. PARALIQ P 68 is also suitable for deep-drawing of aluminium foils. PARALIQ P 1500 can also be used for the lubrication of lifting, drive and conveyor chains.

CASTROL Optigear Synthetic 800/100

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/100

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/100 drops automatically in larger quantities.

Klüber Klüberfood NH1 CH 2-220

High-temperature chain oils for the food and pharmaceutical industries

Application Klüber Klüberfood NH1 CH 2-220

The Klüberfood NH1 CH 2 oil series has been designed for lubrication of all drive, control and transport chains subject to high temperatures and loads.They are particularly used for chains in baking ovens and other high- temperature chain applications in the food-processing industry

Q8 Haydn 150

Applications 

Q8 Haydn 150 hydraulic oils are recommended for all machine tool hydraulic systems, particularly where superior anti-wear and filterability are of prime importance. Also recommended for hydraulic control systems and robotics where oil quality is essential for accuracy and consistency.

Summary of Main Features and Benefits of Q8 Haydn 150

Optimum anti-wear performance, based on a zincdiakyldithiophosphate additive is part of Q8 Haydn 150 formulation

Long service life due to high thermal and oxidation stability for high temperature applications

Trouble-free operation due to the unique combination of outstanding demulsibility, foam, air release, hydrolytic stability and filterability characteristics

Can also be applied in other industrial equipment such as screw-air compressors and not severely loaded gears

Klüber Klüberalfa XZ 3-1

Dispersant, solvent and detergent

Application Klüber Klüberalfa XZ 3-1

As solvent and detergent: Klüberalfa XZ 3-1 may be used to clean friction points prior to the application of PFPE products such as BARRIERTA L55/2. When used on clean surfaces, both the adhesion and the performance of such lubricants are significantly improved. To attain optimum lubrication results, we recommend cleaning the friction point prior to initial application first with white spirit 180/210 and then with Klüberalfa XZ 3-1. Prior to initial lubrication, the friction point should be bright (i.e. free of any residues) and free of dirt particles. As a dispersant: PFPE greases dispersed with Klüberalfa XZ 3-1 are used for minimum-quantity lubrication of bearings, chains, small gears, seals and many other components. With Klüberalfa XZ 3-1, the active substance content in dispersions of the Klüberalfa product family can be adjusted to individual needs without difficulty. Due to its high dispersive capacity, Klüberalfa XZ 3-1 is used as a flushing fluid to remove used PFPE grease from components that are difficult to clean. The cleaned surfaces remain free of grease and bright. It may be advisable to protect them against corrosion after cleaning. Food-processing and pharmaceutical industries: Klüberalfa XZ 3-1 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The product was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberalfa XZ 3-1 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Klüber ISOFLEX PDL 300 A

High-performance grease for rolling bearings operating at low temperatures

Application Klüber ISOFLEX PDL 300 A

ISOFLEX PDL 300 A is suitable for plain and rolling bearings, and for sliding points such as cams, bolts, meters, cam plates, and adjusting rings used in automotive, telecommunications and precision engineering, in instruments, and in cryotechnology applications.

CASTROL HYSPIN AWS 15

Anti-wear Hydraulic Oil

Application CASTROL HYSPIN AWS 15

Castrol Hyspin AWS 15 has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Castrol Hyspin AWS 15 has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits.

In addition, Castrol Hyspin AWS 15 provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Castrol Hyspin AWS 15 is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials

Castrol Hyspin AWS 15 is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM 22

Your advantage! Price of CASTROL HYSPIN AWS 15 drops automatically in larger quantities.

Mobil Nuto H 46

Mobil Industrial hydraulic oil

Most important applications of Mobil Nuto H 46 are:

• + Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required
• + Where hydraulic oil contamination or leakage is unavoidable
• + Where small amounts of water are unavoidable

Pay attention! Price of Mobil Nuto H 46 drops automatically with higher volumes.

Klüber Klüberoil YF 100

High-temperature chain oil

Application Klüber Klüberoil YF 100

Klüberoil YF 100 is suitable for the lubrication of transport chains used in the food processing industry, e.g. plate carrier chains in bread baking ovens. It can also be used on drive and control chains in melting furnaces used in the metal industry and on other chains subject to high temperatures.