Buy Lubricants — mineral, synthetic, dry & adhesive

Klüber Summit DSL 100

Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours

Application Klüber Summit DSL 100

The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).

Klüber Summit HySyn FG 46

Fully synthetic compressor oils for the food-processing and pharmaceutical industry

Application Klüber Summit HySyn FG 46

Klüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressors. Klüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapour which cannot be removed by the oil separator). Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressors. Owing to their good stability, these oils are also suitable for lowtemperature applications in industrial gears. Furthermore, Klüber Summit HySyn FG 32-46-68 oils are used in chains, particularly those operating at low temperatures, e.g. in freezing tunnels.

Aeroshell Fluid 41

AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness, and possesses improved fluid properties

Application Aeroshell Fluid 41

AeroShell Fluid 41 is intended as an hydraulic fluid in all modern aircraft applications requiring a mineral hydraulic fluid. AeroShell Fluid 41 is particularly recommended where use of a "superclean" fluid can contribute to improvements in component reliability, and can be used in aircraft systems operating unpressurised between –54°C to 90°C and pressurised between –54°C to 135°C. AeroShell Fluid 41 should be used in systems with synthetic rubber components and must not be used in systems incorporating natural rubber. AeroShell Fluid 41 is compatible with AeroShell Fluids 4, 31, 51, 61 and 71 and SSF/LGF. Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 41. The residual solvent contaminates the hydraulic fluid and may lead to corrosion. Due to its properties, it is also used in several industrial applications.

GEARMASTER LXG 00

Synthetic oil-based, semi-fluid gear grease

GEARMASTER LXG 00 field of applications:

GEARMASTER LXG 00 is used for high-performance gearboxes. The product is compatible with seals and does not affect yellow metals and aluminium. It is suitable for the use in central lubrication systems of commercial vehicles and as a sealing grease in shock absorbers.

GEARMASTER LXG 00 method of applications:

Gearboxes can be filled with GEARMASTER LXG 00 manually or by central filling systems. Please observe the manufacturers’ recommendations concerning filling capacities.

Please note!! Price of GEARMASTER LXG 00 drops automatically in larger quantities.

Mobil SHC 639

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 639 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 639 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 639 drops automatically with higher volumes.

Mobil SHC 634

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 634 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 634 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 634 drops automatically with higher volumes.

FM HEAT TRANSFER FLUID 32

Heat transfer fluid for use in food manufacturing industry

FM HEAT TRANSFER FLUID 32 main applications:

• Heat transfer systems with a bulk oil temperature range of approximately -10 °C to max. +325 °C where the surface temperature of the heating elements (oil fi lm temperature) should not exceed +340 °C.

FM HEAT TRANSFER FLUID is designed for closed circuit and pressureless heat transfer systems. It is based on a careful blend of highly refi ned oils and additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of FM HEAT TRANSFER FLUID 32 drops automatically in larger quantities.

CASTROL Viscogen KL 23 Spray

Synthetic high temperature chain lubricant

Application CASTROL Viscogen KL 23 Spray

Viscogen KL Spray is available in 3 different versions for use depending on the ambient and operating conditions. Spray versions are particularly suited to lubricate difficult to reach lubrication points. The dimensions of the chain as well as its structural shape (e.g. roller, pin, ladder chains, insertion and flat link hoisting chains) are important when selecting the right viscosity. Viscogen KL Sprays find use in many industrial applications, for example: High-rack storage shelves, bakery machines, paint lines, conveyor chains, tenter frames and dryers, washing plants, underfloor chains, steamers, slashers, baking ovens, slide ways, spindles, ropes, open gear wheels, plastic toothed belts and sheet-fed offset machines. Viscogen KL 23 is especially suitable for use in BOPP (Biaxially oriented Polypropylene) film stretching machines.

RENOLIN PG 220

Fully synthetic polyglycol based gear- and general lubrication oils

RENOLIN PG 220 field of applications:

The RENOLIN PG gear oils are mainly suitable for the lubrication of gear units and worm gears / roller bearings and friction bearings which are subject to high mechanical and thermal stress. RENOLIN PG oils offer advantages compared with mineral oil-based gear oils especially in applications with high sliding velocities (e.g. worm gear units). Due to the high oxidation stability, the oil change intervals can be extended and the maintenance costs can be reduced at higher operating temperatures. The use of RENOLIN PG in worm gears (steel-bronze pairing) leads to a significant reduction of friction and wear. The RENOLIN PG products can also be used for paper machines, calendars, conveying machines and milling bearings. Peak temperatures of up to 200ºC are temporarily tolerable.

Please note!! Price of RENOLIN PG 220 drops automatically in larger quantities.

Castrol Alusol SL 61 XBB

High performance semi-synthetic metalworking fluid

Application Castrol Alusol SL 61 XBB

Alusol SL 61 XBB is especially designed for the machining of aluminium alloys. The product can also be used for the machining of ferrous alloys.

Your advantage! Price of Castrol Alusol SL 61 XBB drops automatically in larger quantities.

Aeroshell Grease 7

AeroShell Grease 7 is an advanced multi-purpose grease, composed of a synthetic oil thickened with Microgel®, possessing good load carrying ability over a wide temperature range. It is inhibited against corrosion and has excellent resistance to water. The useful operating temperature range is –73°C to +149°C.

Application Aeroshell Grease 7

AeroShell Grease 7 satisfies nearly all the airframe grease requirements of turbine engined aircraft and also those of piston engined aircraft provided that seal incompatibility does not occur. Most civil aircraft manufacturers approve AeroShell Grease 7 as a general purpose grease either by brand name or by specification. It is recommended for lubricating highly loaded gears, actuator screw mechanisms, etc., also for instrument and general airframe lubrication within the temperature range of –73°C to +149°C.

CASTROL Optigear BM 680

High Performance Gear Oils

Application CASTROL Optigear BM 680

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 680 drops automatically in larger quantities.

CASTROL Optigear BM 100

High Performance Gear Oils

Application CASTROL Optigear BM 100

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 100 drops automatically in larger quantities.

Aeroshell Grease 6

AeroShell Grease 6 is a general purpose grease composed of a mineral oil thickened with Microgel®, possessing good all-round properties within a limited range. It is inhibited against oxidation and corrosion and has good water resistance and low noise capability. The useful operating temperature range is –40°C to +121°C

Application Aeroshell Grease 6

AeroShell Grease 6 is a general purpose airframe grease for use in antifriction bearings, gearboxes and plain bearings within the temperature range of –40°C to +121°C.

UNISILKON F GLK 112

Special lubricating grease for Bowden cables, seals and plastics

Application UNISILKON F GLK 112

UNISILKON F GLK 112 is primarily used for the lubrication of rubber-metal, plastic-metal or plastic-plastic friction pairings. Possible applications are in slideways, seals (also EPDM), Bowden cables and belt tensioners. In such applications, UNISILKON F GLK 112 reduces friction, thus preventing annoying squeaking noise.

Klüber Klübersynth GE 46-1200

Synthetic long-term fluid grease with excellent anticorrosive effect

Application Klüber Klübersynth GE 46-1200

We developed Klübersynth GE 46-1200 on the basis of our long experience in the lubrication of spur, bevel and worm gears. Especially for steel/steel combinations, for example in small and miniature gears, gear motors and power tool gears, Klübersynth GE 46-1200 offers outstanding performance characteristics. Medium peripheral speeds of 4-5 m/s can be effectively handled by this grease. It also provides vibration and noise damping. Klübersynth GE 46-1200 can also be used to optimise the lubrication of ball and roller guides, plain and rolling bearings, and toothed couplings from – 30 to 120 °C. It may even be applied at extreme temperatures down to -50 °C since Klübersynth GE 46-1200 will build up a load-carrying lubricant film at these low temperature conditions.

Q8 Gear Oil XG 80W-90

Automotive universal transmission lubricant

Applications Q8 Gear Oil XG 80W-90

In synchronised and non-synchronised manual transmissions, axles and drive line components requiring API GL-4/GL-5 performance level.

Approved by Scania in certain categories for use in extended drain application (180000 km).

Your advantage! Price of Q8 Gear Oil XG 80W-90 drops automatically in larger quantities.

Castrol Hysol SL 45 XBB

High performance soluble metalworking fluid

Application Castrol Hysol SL 45 XBB

Hysol SL 45 XBB is especially designed for machining of aluminum and titanium alloys in aerospace industry. The product can also be used for machining of ferrous alloys.

Your advantage! Price of Castrol Hysol SL 45 XBB drops automatically in larger quantities.

CASTROL Almaredge 51 FF

High performance soluble metalworking fluid

Application CASTROL Almaredge 51 FF

Almaredge 51 FF is especially designed for grinding of steel and machining of low-medium alloyed steel and cast iron.