Klüber Summit Ultima 68
97% supplied in 5 working days
Bank transfer or Credit Card (master card & visa) payment
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
UK Deliveries
incoterm DAP
QUESTIONS?
Klüber Summit Ultima 68
Synthetic air compressor oils for oil change intervals up to 12,000 operating hours
Application Klüber Summit Ultima 68
Klüber Summit Ultima oils have been especially designed for screw-type compressors subject to high loads. They are used for oil change intervals up to 12,000 operating hours in oilinjected screw-type compressors. Klüber Summit Ultima oils can be used for compressors that were previously run with mineral oils. Klüber Summit Ultima oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit Ultima oils offer better oxidation stability than conventional synthetic oils due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be reduced several-fold compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; it also helps to prevent the gumming of pneumatic valves in the compressed air circuit.
Performance, Features & Benefits of Klüber Summit Ultima 68 are:
- Low maintenance and operating costs due to extended oil change intervals up to 12,000 operating hours in oilinjected screw-type compressors
- Easy compressor oil conversion due to neutral behaviour of oils towards seals
- Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
- Low formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter and separator life
If you have any questions, please contact OlieOnline Technical Helpdesk
Product Description Klüber Summit Ultima 68
Klüber Summit Ultima oils are air compressor oils based on synthetic ester oil and special additives. These oils are also miscible with air compressor oils based on polyglycol. Klüber Summit Ultima oils offer excellent oxidation and ageing stability and show a good viscosity-temperature behaviour.
Typical Characteristics
| Product specifications : | Klüber Summit Ultima 68 | |
| Article number | 050086 | |
| Colour space | yellow | |
| Appearance | clear | |
| Density, 20 °C | DIN 51757 | approx. 0.92 g/cm³ |
| Kinematic viscosity, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 65 mm²/s |
| Kinematic viscosity, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 9.3 mm²/s |
| Viscosity index | DIN ISO 2909 | >= 100 |
| Copper corrosion, 3 h/100 °C | DIN EN ISO 2160 | 1 - 100 corrosion degree |
| Foam test, sequence I/24 °C | ASTM-D 892, ISO 6247 | <= 50/0 ml |
| Foam test, sequence II/ 93.5 °C | ASTM-D 892, ISO 6247 | <= 50/0 ml |
| Foam test, sequence III/24°C | ASTM D 892, ISO 6247 | <= 50/0 ml |
| Pour point | DIN ISO 3016 | <= -39 °C |
| Demulsifying capacity, at 54 °C | DIN 51599, ASTM D 1401 | 40/37/3 ml |
| Flash point, Cleveland, open-cup apparatus | DIN EN ISO 2592 | >= 246 °C |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
DIN ISO 3016 | 60 months |
Application notes
When selecting the oil viscosity for air compressors please observe the manufacturers’ instructions. When switching a used compressor to Klüber Summit Ultima oils, drain the old oil from the whole circuit while still warm. We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit Ultima oil. When switching from a mineral or polyglycol oil to Klüber Summit Ultima oil please consider that the compressor may contain oxidation residues in the form of blackened or contaminated oil. As such residues can affect the service life of the fresh Klüber Summit Ultima oil, the compressor should be cleaned using the Klüber Summit Varnasolv conditioner. For further information, please consult the Klüber Summit Varnasolv product information leaflet or contact Klüber Lubrication. After switching to a Klüber Summit Ultima oil we recommend determining the oil change interval through an oil analysis or the Klüber Summit TAN Kit.
You may also be interested in
-
![Klüber Klüber Summit Ultima 46]()
Klüber Summit Ultima 46Starting at: £ 31.99 / L
Discover the benefits of OilOnline!
Are you looking to buy oil from OilOnline? Then you can take advantage of many benefits:
Our knowledge
is your strength!
At OilOnline, we have a team of passionate lubricant specialists with extensive knowledge and experience.
Detailed
advice
Our experts will assist you in choosing the best products, so you can get the most out of your vehicle or machine.
Uncompromising
Quality
At OilOnline, we only offer lubricants from globally renowned quality brands.
Save on
Lubricants
By ordering larger quantities, you can take advantage of price benefits at OilOnline.