Cutting Fluids emulsions

Q8 Berlioz XMR

Metalworking fluid

Soluble fluids that are free of formaldehyde, chlorinated paraffins and secondary amine.

Q8 Berlioz XMR is a full range of soluble metalworking grades designed to balance the latest European legislation requirements with performance. Q8 Berlioz XMR is a full compliment of products which encompasses the latest in additive technology and is designed to cover every application.

• Free from formaldehyde, secondary amines & chlorinated additives*.
• Fully compliant to TRGS 611 legislation.
• Covers a full range of applications & materials from economical to high performance.
• Demonstrates low foaming and stability in all water hardness.
• Superior bio-stability and corrosion protection.

Houghton Dromus B

Water miscible metalworking fluid.

Houghton Dromus B is a general purpose soluble oil for light to moderate duty machining on a wide range of materials.

It is free from biocides.

Properties:

Dromus B is a high mineral oil content soluble oil for easy to medium duty machining, including grinding, on a wide variety of materials including ferrous as well as nonferrous metals.

Recommendations for use: General machining 6 - 8 %, Severe cutting operations 8 - 12 %.

Houghton Hocut 3220 is the successor to Adrana D 208.01

Earlier Adrana D 208.01 was replaced by Hocut 3220

• General Machining 5-7%
• Loops 4-6%

It's important to keep this mix-ratio .

Concentrate consumption also depends on the amount of mineral oil, additive package, and technology, water quality, and ultimately on the most important Use of the product. Our expert can tell you a lot more.

We are now shipping the Hocut 3220 instead of the Adrana D 208.01.You can place your order in the table below.

For more information on this product, call Page .

For questions, please contact contact us.

Houghton Adrana D 208.01 new name will change into Hocut 3220

Water miscible metalworking fluid.

Properties

Hocut 3220 is a high quality, general-purpose metalworking fluid for easy to medium duty applications on ferrous metals.

Applications:

It is recommended for easy to medium duty operations on cast iron and (low to medium alloyed) ferrous metals.

It is designed to be used on CNC machine tools, given its excellent detergent, and high wetting properties.

Hocut 3220 is suitable for all removal and grinding operations on stand-alone machines and in central systems.

Hocut 3220 can be used over a broad water hardness range. Recommendations for use: General machining.

CASTROL Almaredge 230 K

High performance soluble metal working fluid

Application CASTROL Almaredge 230 K

Almaredge 230 K is especially designed for machining of aluminium alloys. The product can also be used for machining of low-medium alloyed steel.

Houghton Adrana A 3601.04

A water miscible metalworking fluid.

Properties

It is recommended for heavy-duty machining operations on low silicon content aluminium and is free of amines, boric acid, nitrite, chlorine and formaldehyde releasers.

Applications

Metals: “dirty” metals, such as cast iron.

• Usage: a wide range of machines, such as Kingsburys, Bullards, bar machines, lathes, chuckers, and centerless and cylindrical grinders.

• Processes: machining and grinding.

• Longer sump life.

• Heavy-duty.

• Non-foaming.

Houghton Sitala A 400

A new generation of amine and boric acid-free water-miscible metalworking fluids, recommended for general machining on a wide range of metals including all kind of Aluminium alloys.

SITALA A 400 is a medium duty emulsifiable, boron and amine-free metalworking fluid forming a stable macroemulsion based on high quality mineral oil and polar lubricity additives.

Applications:

SITALA A 400 is recommended for medium machining and grinding operations on a wide range of material including, cast iron, low to medium alloyed steels and aluminium. A non-staining, low alkalinity formula also makes it suitable for machining yellow metals.

The product is designed for soft to medium hardness and for use in single sump machines.

It is not normally used in large central systems.

Adrana A 2859 has now been removed from the range and can best be replaced by Hocut 4444. It is wise to contact us and discuss the application.

Please note We will deliver Hocut 4444 instead of Adrana A2859 if you wish to order it above.

Hereby the link for more information about Hocut 4444

Adrana D 601.01 has been replaced by Hocut 4444

Hocut 4444 is the replacement for Houghton Adrana D 601.01

• General machine machining 8-10%

It is important that this mixing ratio is maintained.

Consumption of concentrate also depends on the amount of mineral oil chosen, the additive package and technology, the water quality and, finally, the most important use of the product. Our expert can tell you much more about this.

From now on we will deliver the Hocut 4444 instead of the Adrana D 601.01.You can place your order in the table below.

If you want more information about this product please view this page .

If you have any questions please contact us contact with us.

Houghton Hocut 4444 is the successor of Sitala D201.03

Previously Sitala D 201.03 has been replaced by Hocut 4444

• General machine machining 8-10%

It is important that this ratio is maintained

Consumption of concentrate also depends on the amount of mineral oil chosen, the additive package and technology, the water quality and, finally, the most important use of the product. Our expert can tell you much more about this.

We will ship the Hocut 4444 instead of the Sitala D 201.03. You can place your order in the table below.

If you want more information about this product please view this page.

If you have any questions please contact us

Houghton 4444 previous Sitala D 201.03 and Adrana D 601.01

Hocut 4444 is a high quality water miscible coolant for general machining of steel and aluminum alloys.

Recommended usage levels for Houghton Hocut 4444 are:

• + Low to Medium Machining: 8 - 10%

Application Houghton Hocut 4444

HOCUT 4444 is recommended for machining low to medium materials, including high stress machining, from a variety of materials, including aluminum alloys, fiber composites, but also iron alloys.

Castrol Alusol SL 51 XBB

High performance soluble metalworking fluid

Application Castrol Alusol SL 51 XBB

Alusol SL 51 XBB is especially designed for machining of aluminum alloys. The product can also be used for machining of ferrous alloys.

Your advantage! Price of Castrol Alusol SL 51 XBB drops automatically in larger quantities.

Previous Houghton Metalina Fluid BY 2211

Applications of Houghton Hocut 5019:

Hocut 5019 is recommended for grinding of cemented tungsten carbide tools where cobalt is used as a binder. The synthetic formula of Hocut 5019 contains a special additive package to prevent dissolution of cobalt by the coolant also contains polymer lubricity additives to improve wheel life and prevent dry evaporation residues on machines.
A minimum concentration of Hocut 5019 is 5% recommended.

 Advantages of Hocut 5019:

Castrol Hysol SL 36 XBB

High performance semi-synthetic metalworking fluid

Application Castrol Hysol SL 36 XBB

Hysol SL 36 XBB is especially designed for machining of cast iron and low-medium alloyed steel.

Your advantage! Price of Castrol Hysol SL 36 XBB drops automatically in larger quantities.

Castrol Hysol SL 37 XBB

High performance semi-synthetic metalworking fluid

Application Castrol Hysol SL 37 XBB

Hysol SL 37 XBB is especially designed for machining of cast iron and low-medium alloyed steel.

Your advantage! Price of Castrol Hysol SL 37 XBB drops automatically in larger quantities.

Castrol Alusol SL 61 XBB

High performance semi-synthetic metalworking fluid

Application Castrol Alusol SL 61 XBB

Alusol SL 61 XBB is especially designed for the machining of aluminium alloys. The product can also be used for the machining of ferrous alloys.

Your advantage! Price of Castrol Alusol SL 61 XBB drops automatically in larger quantities.

Castrol Hysol SL 45 XBB

High performance soluble metalworking fluid

Application Castrol Hysol SL 45 XBB

Hysol SL 45 XBB is especially designed for machining of aluminum and titanium alloys in aerospace industry. The product can also be used for machining of ferrous alloys.

Your advantage! Price of Castrol Hysol SL 45 XBB drops automatically in larger quantities.

CASTROL Almaredge 51 FF

High performance soluble metalworking fluid

Application CASTROL Almaredge 51 FF

Almaredge 51 FF is especially designed for grinding of steel and machining of low-medium alloyed steel and cast iron.