Buy Lubricants — mineral, synthetic, dry & adhesive

Klüber Summit HySyn FG 46

Fully synthetic compressor oils for the food-processing and pharmaceutical industry

Application Klüber Summit HySyn FG 46

Klüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressors. Klüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapour which cannot be removed by the oil separator). Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressors. Owing to their good stability, these oils are also suitable for lowtemperature applications in industrial gears. Furthermore, Klüber Summit HySyn FG 32-46-68 oils are used in chains, particularly those operating at low temperatures, e.g. in freezing tunnels.

Klüber Klüberbio EG 2-150

Environmentally compatible, synthetic high-performance gear oils

Application Klüber Klüberbio EG 2-150

Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.

Shell Morlina S1 B 220 previously Shell Vitrea 220

Industrial Bearing & Circulating Oil

Application Shell Morlina S1 B 220

Machine circulation systems

Oil lubricated bearings. Suitable for most plain and rolling element bearings in general industrial applications

Roll-neck bearings

Enclosed industrial gear systems. Low or moderately loaded enclosed gears where EP performance is not required

Shell Morlina S1 B 150 previously Shell Vitrea 150

Industrial Bearing & Circulating Oils

Application Shell Morlina S1 B 150

Machine circulation systems

Oil lubricated bearings. Suitable for most plain and rolling element bearings in general industrial applications.

Roll-neck bearings

Enclosed industrial gear systems. Low or moderately loaded enclosed gears where EP performance is not required

Klüber Klüberfood NH1 CH 2-220

High-temperature chain oils for the food and pharmaceutical industries

Application Klüber Klüberfood NH1 CH 2-220

The Klüberfood NH1 CH 2 oil series has been designed for lubrication of all drive, control and transport chains subject to high temperatures and loads.They are particularly used for chains in baking ovens and other high- temperature chain applications in the food-processing industry

Shell Turbo Oil T 32

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo T 32 main applications:

• Industrial steam turbines & light duty gas turbines requiring no enhanced anti-wear performance for the gearbox
• Hydroelectric turbine lubrication
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 32 has long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo T 32 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.

Pay attention! Price of Shell Turbo Oil T 32 drops automatically in larger quantities.
Do you need more than 20x 209L ask for our special price

Klüber Klüberalfa XZ 3-1

Dispersant, solvent and detergent

Application Klüber Klüberalfa XZ 3-1

As solvent and detergent: Klüberalfa XZ 3-1 may be used to clean friction points prior to the application of PFPE products such as BARRIERTA L55/2. When used on clean surfaces, both the adhesion and the performance of such lubricants are significantly improved. To attain optimum lubrication results, we recommend cleaning the friction point prior to initial application first with white spirit 180/210 and then with Klüberalfa XZ 3-1. Prior to initial lubrication, the friction point should be bright (i.e. free of any residues) and free of dirt particles. As a dispersant: PFPE greases dispersed with Klüberalfa XZ 3-1 are used for minimum-quantity lubrication of bearings, chains, small gears, seals and many other components. With Klüberalfa XZ 3-1, the active substance content in dispersions of the Klüberalfa product family can be adjusted to individual needs without difficulty. Due to its high dispersive capacity, Klüberalfa XZ 3-1 is used as a flushing fluid to remove used PFPE grease from components that are difficult to clean. The cleaned surfaces remain free of grease and bright. It may be advisable to protect them against corrosion after cleaning. Food-processing and pharmaceutical industries: Klüberalfa XZ 3-1 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The product was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberalfa XZ 3-1 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Klüber Summit HySyn FG 32

Fully synthetic compressor oils for the food-processing and pharmaceutical industry

Application Klüber Summit HySyn FG 32

Klüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressors. Klüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapour which cannot be removed by the oil separator). Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressors. Owing to their good stability, these oils are also suitable for lowtemperature applications in industrial gears. Furthermore, Klüber Summit HySyn FG 32-46-68 oils are used in chains, particularly those operating at low temperatures, e.g. in freezing tunnels.

Shell Corena S3 R46 (Previous Name: Corena S2 R46 / Comptella 46)

Premium Screw Compressor Oil

Benefits of the Corena S3 R 46 are:

• + Reliable protection
• + Long service life, efficiency

Shell Corena S3 R 46 is a high-performance compressor oil for the lubrication of rotary vane pumps and screw compressors. With the additive system used, Shell Corena S3 R 46 offers excellent protection and very good performance at oil change intervals up to 4000 hours, under certain conditions even up to 6000 hours

Shell Spirax S4 CX 50 Previous Name: Shell Donax TC 50

High Performance Off-Highway Transmission and Final Drive Oil

Spirax S4 CX 50 main applications:

• Shell Spirax S4 CX 50 is recommended for use in heavy duty off-highway equipment produced by the world’s leading manufaturers including; Caterpillar, Komatsu, Komatsu-Dresser and in transmissions manufactured by Eaton, Eaton Fuller, ZF, Dana, Rockwell amongst others:
• Powershift transmissions
• Final drives
• Oil immersed brakes

Shell Spirax S4 CX 50 is designed to provide operators with trouble free operation and maximum reliability for the lifetime of the equipment. Spirax S4 CX 50 meets the demanding requirements of modern transmission, final drive, and oil immersed brakes fitted to heavy-duty off-highway equipment.

Please note!! Price of Spirax S4 CX 50 drops automatically in larger quantities.

Klüber ISOFLEX LDS 18 SPECIAL A

Dynamically light, long-term lubricating grease

Application Klüber ISOFLEX LDS 18 SPECIAL A

ISOFLEX LDS 18 SPECIAL A is suitable for plain and rolling bearings operating at low temperatures and/or high speeds, for example in grinding spindles, machine tool spindles, spindle bearings, textile spindles, bearings in OE-spinning turbines, bearings in precision and optical equipment.

Shell Tellus S4 VE 46

Advanced Synthetic Shear Stable Hydraulic Oil

Shell Tellus S4 VE 46 main applications:

• Mobile hydraulic systems
• Industrial hydraulic systems
• Wind Turbines
• Marine Hydraulic Systems
• Premium Wear Protection
• Sub-arctic to extreme desert heat operations

Shell Tellus S4 VE hydraulic fluids are based on Gas-to-liquid (GTL) technology and are designed for a broad range of stationary and mobile applications, with their extra-long oil life, wide operating temperature window, impactful energy efficiency, and robust equipment protection. Shell Tellus S4 VE enables customers to realise potential cost savings through longer equipment service life and lower maintenance costs.

Please note!! Price of Shell Tellus S4 VE 46 drops automatically in larger quantities.

Klüber ISOFLEX PDL 300 A

High-performance grease for rolling bearings operating at low temperatures

Application Klüber ISOFLEX PDL 300 A

ISOFLEX PDL 300 A is suitable for plain and rolling bearings, and for sliding points such as cams, bolts, meters, cam plates, and adjusting rings used in automotive, telecommunications and precision engineering, in instruments, and in cryotechnology applications.

CASTROL HYSPIN AWS 15

Anti-wear Hydraulic Oil

Application CASTROL HYSPIN AWS 15

Castrol Hyspin AWS 15 has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Castrol Hyspin AWS 15 has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits.

In addition, Castrol Hyspin AWS 15 provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Castrol Hyspin AWS 15 is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials

Castrol Hyspin AWS 15 is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM 22

Your advantage! Price of CASTROL HYSPIN AWS 15 drops automatically in larger quantities.

Klüber HOTEMP PLUS

High-temperature chain oil

Application Klüber HOTEMP PLUS

HOTEMP PLUS is suitable for all oil-lubricated stenter chains such as – roller chains, – chains or clips with ball bearings in cases of combined lubrication of bearings, chain joints and slide ways, and – slide chains with lubrication of slide rails, chain joints and bolts in equalizing frames, single-layer stenters, tier stenters, festoon driers and steamers as well as installations.

Klüber Klüberoil YF 100

High-temperature chain oil

Application Klüber Klüberoil YF 100

Klüberoil YF 100 is suitable for the lubrication of transport chains used in the food processing industry, e.g. plate carrier chains in bread baking ovens. It can also be used on drive and control chains in melting furnaces used in the metal industry and on other chains subject to high temperatures.

CASTROL Hyspin ZZ 32

Hydraulic oil for the highest demands

Application CASTROL Hyspin ZZ 32

The Hyspin ZZ range are formulated for applications requiring anti-wear and superior oxidation performance and are particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered. They are formulated for use in severely stressed systems in which high levels of anti-wear performance and/or ultra fine filtration are required. They have been proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment where the application leads to rapid breakdown of more conventional products. The range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin ZZ is classified as follows:

• DIN 51502 classification - HLP
• ISO 6743/4 - Hydraulic Oils Type HM

Hyspin ZZ grades meet the requirements (for appropriate viscosity grade) of:

• DIN 51524 Part 2
• Cincinnati Lamb (Milacron) P 68-69-70
• Denison (Parker Hannafin) HF-0
• US Steel 126 & 127
• Eaton (formerly Vickers) I-286-S & M-2950-S
• Bosch Rexroth RE90220

Your advantage! Price of CASTROL Hyspin ZZ 32 drops automatically in larger quantities.

Shell Spirax S4 CX 10W Previous Name: Shell Donax TC 10W

High-performance off-highway transmission and hydraulic oil

Spirax S4 CX 10W main applications:

• Shell Spirax S4 CX 10W is recommended for use in heavy duty off-highway equipment produced by the world’s leading manufacturers including; Caterpillar, Komatsu, Komatsu-Dresser and in transmissions manufactured by Eaton, Eaton Fuller, ZF, Dana, Rockwell amongst others:
• Powershift transmissions
• Oil immersed brakes
• Hydraulic systems

Shell Spirax S4 CX 10W is designed to provide operators with trouble-free operation and maximum reliability for the lifetime of the equipment. Spirax S4 CX 10W meets the demanding requirements of modern transmission, oil-immersed brake and hydraulic systems fitted to heavy-duty off-highway equipment.

Please note!! Price of Spirax S4 CX 10W drops automatically in larger quantities.

Shell Turbo S4 X 32 

Premium based industrial steam, gas and combined cycle turbine lubricant

Shell Turbo S4 X 32 main applications:

• Power and industrial steam, gas & combined cycle turbines Shell Turbo S4 X 32 is used as the lubricating oil of choice in modern steam, gas and combined cycle turbines.
• Note that some applications with highly loaded gearboxes require a lubricant with enhanced anti-wear performance - for these applications use Shell Turbo S4 GX.
• Further industrial applications
  Shell Turbo S4 X 32 may also be used for other industrial applications requiring a high performance gas turbine oil, such as the lubrication of turbo compressors.

Shell Turbo S4 X 32 is based on Gas-to-Liquid (GTL) technology and has been developed to meet the demands of the latest high efficiency turbine systems. Designed to offer outstanding, long term performance under the most severe operating conditions Shell Turbo S4 X 32 will minimise deposit and sludge formation even under cyclic peak loading conditions.

Shell Morlina S2 B 32 Previously Morlina 32

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 32 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 32 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 32 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 32 drops automatically with larger quantities.