Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Klüber Summit Ultima 46

Your benefit: pallet advantage from 2 barrels
QTY Size Liter price ex. VAT Price ex. VAT Price Incl. VAT
- + 208L £ 0,00 £ 6654,48 £ 0,00
- + 19 Liter £ 0,00 £ 787,55 £ 0,00
Total
£ 0,00

Klüber Summit SH 100

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 100

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Product Description

Details

Performance, Features & Benefits of Klüber Summit SH 100 are:

  • Low maintenance and operating costs due to extended oil change intervals up to 10,000 operating hours in oilinjected screw-type compressors
  • Easy compressor oil conversion due to neutral behaviour of oils towards seals
  • Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
  • Longer servie life of the oil filters, activated carbon filters and oil separators
  • Low formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter and separator life

If you have any questions, please contact OlieOnline Technical Helpdesk

Product Description Klüber Summit SH 100

Klüber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.
 

Typical Characteristics

Product specifications :   Klüber Summit SH 100
Article number   050007
Colour space   colourless
Appearance   clear
Density,  20 °C DIN 51757 approx. 0.86
g/cm³
Kinematic viscosity,  40 °C DIN 51562 pt. 01/ASTM
D-445/ASTM D 7042
approx. 100
mm²/s
Kinematic viscosity,  100 °C DIN 51562 pt. 01/ASTM
D-445/ASTM D 7042
approx. 13.1
mm²/s
Viscosity index DIN ISO 2909 >= 115
Foam test, sequence
I/24 °C
ASTM-D 892, ISO 6247 50/0 ml
Foam test, sequence
II/ 93.5 °C
ASTM-D 892, ISO 6247 50/0 ml
Foam test,  sequence
III/24°C
ASTM D 892, ISO 6247 50/0 ml
Demulsifying capacity,  at 54 °C DIN 51599, ASTM D
1401
 
Demulsifying capacity,  at 82 °C DIN ISO 6614, ASTM D
1401
40/37/3 ml
Flash point Cleveland,
open-cup apparatus
DIN EN ISO 2592, >= 240 °C
Copper corrosion 24
h/100°C
DIN EN ISO 2160, 1 - 100
corrosion
degree
Pour point DIN ISO 3016 <= -33 °C
Minimum shelf life from the date of
manufacture - in a dry, frost-free place and in
the unopened original container, approx.
  60 months

 

Application notes

When selecting the oil viscosity for air compressors please observe the manufacturers' instructions. When switching a used compressor to a Klüber Summit SH oil, drain old oil from whole circuit of compressor while still warm. We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit SH oil. When switching from mineral oil to a synthetic Klüber Summit SH oil please consider that the compressor may contain oxidation residues in the form of blackened or contaminated oil. As such residues can affect the service life of the fresh Klüber Summit SH oil, the compressor should be cleaned using the Klüber Summit Varnasolv conditioner (cf. product information leaflet). Your contact persons at Klüber Lubrication would be pleases to provide further information. After switching to a Klüber Summit SH oil we recommend determining the oil change interval through an oil analysis or the Klüber Summit TAN Kit.
 

FAQ

Questions and Answers

Add your question

There are no entries.


Additional Information

Additional Information

Brand Klüber
ACEA DIN ISO OEM No
OEM Approval No

You may also be interested in the following product(s)

Klüber Summit Ultima 68

Klüber Summit Ultima 68

Starting at: Excl. Tax: £707.88 Incl. Tax: £707.88