Buy Lubricants — mineral, synthetic, dry & adhesive

Mobil Vacuoline 146

Circulating Oils

Application Mobil Vacuoline 146

Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for: Back-up roll bearings of rolling mills, particularly bearing systems, where either a single or dual tank is employed. Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination

Mobil DTE 832

Superior Performance Turbine Oils

Application Mobil DTE 832

Mobil DTE 832 and 846 are superior performance turbine oils designed for use in steam and gas turbine oil systems, direct- or gear-coupled and turbine speed control mechanisms. Specific applications include: Combined cycle (CCGT) electric power generation applications including those with a common circulation system for the steam turbine and gas turbine. Lubrication of steam turbine or gas turbine units used for electric power generation, natural gas pipeline transmission, process operations and cogeneration plants.

Mobil DTE PM 150

Paper Machine Lubricants

Application Mobil DTE PM 150

Lubrication of industrial paper machine circulating systems. Application involving circulation systems operating over a wide temperature range. Systems that must be started and brought on line quickly. Circulation systems' lubricating gears and bearings

Houghton Macron 400 M-32

Properties

Macron 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 400 M-32 is free from zinc, chlorine and active sulphur.

Applications

Macron 400 M-32 is a high performance cutting oil for operations on light and medium alloyed steels, aluminium and yellow metals.

Macron 400 M-32 has multipurpose oil characteristics for cutting and hydraulic oil HLP DIN 51524-2 and gear oil CLP DIN 51517-3.

It has a good de-aeration power, does not foam and is not aggressive for the paints on machine tools.

MACRON 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MACRON 400 M-32 is free from zinc, chlorine and active sulphur. 

Advantages:

• Increased productivity - reduced machine downtime.
• Reduced cost - long sump life.
• Secure handling - fulfills HLP 1 CLP standards.
• Secure handling - high EHS standard.

Shell PANOLIN S2 Hydraulic EAL 32

For Hydraulic Systems in Environmentally Sensitive Areas

Key applications of Shell PANOLIN S2 Hydraulic EAL 32 include:

• Hydraulic systems in marine, offshore, and industrial sectors
• Applications in environmentally sensitive areas (such as U.S. waters)
• Suitable for systems where biodegradable oils are required

Shell PANOLIN S2 Hydraulic EAL is a biodegradable synthetic hydraulic oil of the HEES type. This oil meets the requirements of the EU Ecolabel and the US EPA Vessel General Permit. It offers excellent wear protection, is formulated ash-free, and contains on average 82% renewable components.

CASTROL HYSPIN DSP 22

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 22

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 22 drops automatically in larger quantities.

Mobilube S 80W-90

High-quality, heavy-duty oils for gearboxes

for heavily loaded transmission components in road transport, commercial vehicles and passenger cars

Mobilube S 80W-90 is recommended by ExxonMobil for use in applications where API GL-4 / GL-5 is required. < / p>

The main applications of Mobilube S 80W-90 are:

Recommended by ExxonMobil for:

• Passenger cars, light and heavy road transport, buses and vans.
• Heavy vehicle drive lines that require API GL-4 / GL-5 level.

Mobil DTE PM 220

Paper Machine Lubricants

Application Mobil DTE PM 220

Lubrication of industrial paper machine circulating systems. Application involving circulation systems operating over a wide temperature range. Systems that must be started and brought on line quickly. Circulation systems' lubricating gears and bearings

Klüber Klüberoil 4 UH1-680 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-680 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

Shell Tellus S4 ME 32 Previous Name: Tellus EE

Advanced Synthetic Industrial Hydraulic Fluid

Shell Tellus S4 ME 32 main applications:

• Industrial hydraulic systems
• Mobile hydraulic systems
• Environmental impact

Shell Tellus S4 ME 32 hydraulic fluids are designed to help users improve the energy efficiency of their hydraulic systems without compromising the protection of the system or maintenance procedures of their equipment and operations. Shell Tellus S4 ME 32 has been demonstrated to improve energy efficiency in a wide range of applications such as plastic injection moulding, metal pressing, and mining conveyors. In addition, Shell Tellus S4 ME 32 is also designed to help equipment service life and lower maintenance costs through providing outstanding wear protection and long oil life capability

Please note!! Price of Shell Tellus S4 ME 32 drops automatically in larger quantities.

Houghton Garia 405 M-22

Properties

GARIA 405 M-22 is based on hydro treated mineral oil with low aromatic content. A combination of polar. extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

GARIA 405 M-22 contains active sulphur and may discolour yellow metals.

The oil is zinc and chlorine free.

Applications

GARIA 405 M-22 is the universal oil for the gear shop. It shows excellent performance for the gear grinding as well as for gear hobbing and shaping operations.

GARIA 405 M-22 is used also for the machining of steel and cast iron on automatic turning lathes.

Approvals

Hofler and Klingelnberg.

Houghton Macron 2425 S-14

Properties

Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.

Applications

Macron 2425 S-14 is a high performance grinding oil, used for flute grinding on high-speed steel, and with ceramic and diamond or boron nitrite grinding wheels.

Macron 2425 S-14 can also be used for grinding spiral toothed bevel gears and flat or cylindrical grinding processes, on the complete range of steels and non-ferrous metals.

Approvals

Product is approved by Liebherr, Kapp, Niles, Junker, Hofler, Klingelnberg.

Houghton Macron 205 M-8

Properties

Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 205 M-8 is zinc and sulphur free.

Applications

Macron 205 M-8 is a universal honing, superfinishing and grinding oil.

Typical application is in the bearing industry and electronic industry for fine machining of aluminium and yellow metals.

Macron  205 M-8 has higher viscosity compared to other typical honing oils.

Medium term rust preventive oil

Ensis RPO 1200 is a solvent free, oil-based temporary corrosion preventative for metal surfaces likely to corrode in storage or use Ensis RPO 1200 leaves a thin, self-healing, oily, protective film on surfaces requiring temporary protection. It is ideal for use on finished parts, subjected to indoor storage of up to twelve months.

Important properties of Houghton Ensis RPO 1200 (previous name Shell Ensis RPO 1200) are:

• + Indoor protection for 12 months
• + Outdoor covered protection for 3 months
• + No cleaning needed before parts assembling
• + Low volatility
• + High flashpoint

Houghton Garia 404 M-10

Properties

Garia 404 M-10 is a neat cutting oil for machining high alloyed steels, aluminum and magnesium alloys. Garia 404 M-10 is chlorine free, free of heavy metals and it has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and anti-wear additives which gives the oil high load carrying properties. Due to its active sulphur content, the oil may discolor yellow metals.

Applications

Garia 404 M-10 is recommended for:

Grinding

Deep-hole drilling

Taping or broaching of low to medium alloyed steels

Gear hobbing

Machining on automatic lathes

Garia 404 M-10 is used neat as supplied.

Klüber BARRIERTA L 55/1

High-temperature long-term greases

Application Klüber BARRIERTA L 55/1

Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include: – conveyors (load and turn rollers) – kiln cart wheel bearings – calender bearings – fan bearings – chain bearings in film stretching stenters BARRIERTA L 55/2 is most frequently used for initial and longterm lubrication. For relubrication softer grades of NLGI class 1 or lower are recommended. Friction points under the influence of media BARRIERTA L 55 greases offer exceptionally long service lifetimes even when exposed to any of a large number of aggressive media such as concentrated acids, lyes, organic solvents or gases. In addition to their resistance to media, BARRIERTA L 55/2 and BARRIERTA L 55/3 offer also good adhesion and a sealing effect, which makes them suitable for application in – valves, fittings and installations e.g. in the chemical industry – pneumatic components – level gauges, e.g. for fuels or chemicals – seals (static, dynamic) – extraction systems Food-processing and pharmaceutical industries All BARRIERTA L 55 greases are registered as NSF-H1 and are therefore in compliance with FDA 21 CFR § 178.3570. The additional certification according to ISO 21469 supports the compliance with the hygienic requirements in your production plant. White-coloured BARRIERTA L 55 special lubricants can therefore also be used on friction points where incidental contact with food products cannot be ruled out for technical reasons, e.g. in rolling and plain bearings and guides operating under high thermal loads in – automatic baking ovens – cooking or frying lines – conveyor systems Plastic-plastic friction points BARRIERTA L 55 greases – irrespective of NLGI grade - are neutral towards the majority of plastic materials. Results of pertinent tests with fluoroelastomers can be found overleaf. We recommend testing lubricant compatibility with the materials in question prior to series application.

Mobil Grease XHP 462

Grease

Application Mobil Grease XHP 462

Mobilgrease XHP 460 greases are used in a wide range of equipment including industrial, automotive, construction and marine applications. The blue color of Mobilgrease XHP 461 and 462 enables easy verification of application. With its high, ISO VG 460 base oil viscosity, these greases are recommended for high load applications at slow-to-moderate speeds, including most bearing applications in the paper, construction, and mining industries, as well as off-highway vehicles. Specific applications: Mobilgrease XHP 461 is recommended by ExxonMobil for use in industrial and marine applications, chassis components and farm equipment. It provides excellent low temperature performance. It is satisfactory for low speed flexible gear-type couplings. Mobilgrease XHP 462 Series is recommended for use in felt roll bearings, wet end bearings, and press section bearings. It is also a good multi-purpose grease for general mill applications and industrial and marine applications, chassis components and farm equipment. Mobilgrease XHP 462 Moly is fortified with 3% molybdenum disulfide and is particularly recommended by ExxonMobil for applications such as bucket pins and fifth wheels, where molybdenum disulphide provides an extra level of protection where sliding friction and oscillating motion can lead to rupturing of the oil film, resulting in metal to metal contact.

Mobil Grease XHP 461

Grease

Application Mobil Grease XHP 461

Mobilgrease XHP 460 greases are used in a wide range of equipment including industrial, automotive, construction and marine applications. The blue color of Mobilgrease XHP 461 and 462 enables easy verification of application. With its high, ISO VG 460 base oil viscosity, these greases are recommended for high load applications at slow-to-moderate speeds, including most bearing applications in the paper, construction, and mining industries, as well as off-highway vehicles. Specific applications: Mobilgrease XHP 461 is recommended by ExxonMobil for use in industrial and marine applications, chassis components and farm equipment. It provides excellent low temperature performance. It is satisfactory for low speed flexible gear-type couplings. Mobilgrease XHP 462 Series is recommended for use in felt roll bearings, wet end bearings, and press section bearings. It is also a good multi-purpose grease for general mill applications and industrial and marine applications, chassis components and farm equipment. Mobilgrease XHP 462 Moly is fortified with 3% molybdenum disulfide and is particularly recommended by ExxonMobil for applications such as bucket pins and fifth wheels, where molybdenum disulphide provides an extra level of protection where sliding friction and oscillating motion can lead to rupturing of the oil film, resulting in metal to metal contact.

CASTROL Almaredge 11 FF

High performance semi-synthetic metalworking fluid

Application CASTROL Almaredge 11 FF

Almaredge 11 FF is especially designed for grinding of steel and machining cast iron.