Lubricants

CASTROL Optigear Synthetic 800/460

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/460

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Klüber Klüberfood NH1 C 6-150

Synthetic oil for chains in can lacquering lines for the food-processing industry

Application Klüber Klüberfood NH1 C 6-150

Klüberfood NH1 C 6-150 may be applied via suitable chain lubrication system. Compatibility of the lubricant with the materials of the reservoir should be checked. To attain the highest performance in curing and lacquering applications please do not hesitate to consult your local Klüber representative. Mixing of Klüberfood NH1 C 6-150 oil with other incompatible or non-food-grade lubricants should be avoided! For object/chain temperatures up to approx. 160 °C as may result from oven temperatures of approx. 300 °C under certain operating conditions. We recommend sufficient air removal under such conditions.

CASTROL Optigear Synthetic 800/220

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/220

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/220 drops automatically in larger quantities.

Klüber Summit PS 200

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 200

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

Klüber Contrakor Fluid H 1

Long-term corrosion preventive, effective rust remover

Application Klüber Contrakor Fluid H 1

Corrosion preventive for all metallic surfaces, especially on machines, devices, tools, moulds, wire ropes, vehicles, battery terminals. Especially suitable for the long-term preservation of spare parts stored indoors. Rust remover for all parts affected/immobilised by rust, e.g. screw joints, pins, hinges, slides. The fluid spreads well and thoroughly penetrates the affected surfaces. A light rust film will be dis-solved quickly, severe rust takes somewhat longer. Lubricant For chains, bearings, springs, sliding points, wire ropes, antennas and joints. A thin fluid film is sufficient to ensure reliable reduction of friction and wear. Dehydrating oil, moisture repellent for antenna boxes, ignition timers and ignition cables; in general for machines and devices that are frequently operated under open-air conditions. The fluid penetrates beneath moisture and repels water. Contact oil for clamped and screwed electric contacts and couplings. Ensures reliable passage of current and repels water. Machining fluid to provide cooling in machining pro-cesses without a coolant circuit. Helps to preserve tools and work-pieces and leads to better results. Cleaning and care fluid for penetration and dissolution of dirt, oil residues, scale, etc. Protects bright metal surfaces and preserves the appearance of decorative parts.

Aeroshell Turbine Oil 560

Synthetic lubricating oil for aircraft turbine engines

Application Aeroshell Turbine Oil 560

Changes which have taken place over the last twenty years in engine performance (in terms of improved fuel consumption, higher operating temperatures and pressures) and maintenance practices have resulted in increased severity in lubricant operating conditions. AeroShell Turbine Oil 560 was developed to withstand the hostile environments of today’s high powered, high compression engines in which the older generation of oils can be stressed up to and beyond their thermal limits, as evidenced by oil coking in the high temperature bearing areas. By overcoming the problems associated with using old technology oils in new technology engines, AeroShell Turbine Oil 560: maintains a cleaner engine; provides improved load carrying capacity; reduces maintenance costs; prolongs bearing life in both new and existing engines. In order for military authorities to take advantage of this better performance in military engines the specification MIL-PRF-23699 was re-written to include a "High Thermal Stability" (HTS) grade as well as the Standard (STD) and Corrosion Inhibited (C/I) grades. AeroShell Turbine Oil 560 is fully approved as an HTS oil. With the advent of the new civil turbine oil specification, SAE AS5780, which has more stringent requirements than the military specification, AeroShell Turbine Oil 560 was approved as a SPC (Standard Performance Capability) oil. With effect from January 1st 2002, AeroShell Turbine Oil 560 has been manufactured with an improved formulation to further enhance its anti-coking performance. AeroShell Turbine Oil 560 contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics.

Klüber Klüberoil GEM 1-46 N

High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology

Application Klüber Klüberoil GEM 1-46 N

Klüberoil GEM 1 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

CASTROL BioTac MP

Environmentally responsible multipurpose EP grease

Unfortunately no longer available

We recommend this replacement Shell Naturelle Grease S2 A600P 1.5

Application CASTROL BioTac MP

BioTac MPTM has been developed primarily for use on exposed marine deck applications and combines excellent physical properties that enable resistance to both mechanical shear and water spray-off with an additive system developed to protect exposed components from corrosion, oxidation and the effects of load, friction and wear. BioTac MPTM is intended for use in a wide range of applications including plain bearings, wire ropes and open gears typically found in marine mooring and cargo winches. Furthermore, ramp door bearings, pedestal bearings and cargo hatch rollers are also examples of slow/medium speed marine deck applications for which BioTac MPTM is ideally suited. The combination of thickener and base oil technology enables BioTac MPTM to have a broad operating temperature range of between -35C and +125C.

Klüber Summit PS 150

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 150

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

Aeroshell Fluid 3

Mineral lubricating oil for general purpose aircraft use

Application Aeroshell Fluid 3

AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments. AeroShell Fluid 3 is normally applied by means of an oil can or brush. For this reason it is also described as ‘an oilcan lubricant. Operating temperature range of AeroShell Fluid 3 is -54°C to +121°C. For high temperature applications where no provision is made for frequent re-lubrication the synthetic oil, AeroShell Fluid 12, should be used in place of the mineral oil, AeroShell Fluid 3; however in this case care should be taken to ensure that there is no incompatibility between AeroShell Fluid 12 and seals, paints etc.

Klüber HOTEMP 2000

High-temperature lubricating oil

Application Klüber HOTEMP 2000

HOTEMP 2000 is used for lubrication points subject to high thermal loads as are common in chains, slideways, gears, wire ropes, guideways or cams. It is not washed off and penetrates well into chain joints and friction points. HOTEMP 2000 is preferably used for temperatures up to approx. 250 °C. A durable, load-carrying lubricant film is attained even at these high temperatures.

CASSIDA FLUID GLE 150 

Enhanced performance gear lubricant for food & beverage processing Equipment

CASSIDA FLUID GLE 150 main applications:

• Lubrication of rotary can seaming machines equipped with either enclosed (recirculating) or total loss systems
• Circulating and bearing oil systems where contamination with water or food juice can occur, such as citrus juice extraction machines

CASSIDA FLUID GLE 150 are fully synthetic, high performance, antiwear gear lubricants, specifically designed for use in the food and beverage canning industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID GLE 150 drops automatically in larger quantities.

CASSIDA FLUID GLE 220 

Enhanced performance gear lubricant for food & beverage processing Equipment

CASSIDA FLUID GLE 220 main applications:

• Lubrication of rotary can seaming machines equipped with either enclosed (recirculating) or total loss systems
• Circulating and bearing oil systems where contamination with water or food juice can occur, such as citrus juice extraction machines

CASSIDA FLUID GLE 220 are fully synthetic, high performance, antiwear gear lubricants, specifically designed for use in the food and beverage canning industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID GLE 220 drops automatically in larger quantities.

Klüber Klüberoil 4 UH1-320 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-320 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

Klüber Klüberlub BE 41-1501

Heavy-duty grease for highly-loaded rolling bearings operating at low speeds

Application Klüber Klüberlub BE 41-1501

Klüberlub BE 41-1501 was developed for highly-loaded large rolling bearings running at low speeds as well as toothed gear systems such as industrial and rail traction gear couplings. Typical applications and requirements include: spherical roller bearings in roller presses, bowl mill crushers and rotary crushers in the mining and base materials industries. The operating conditions of roller bearings require use of a heavy-duty grease with high base oil viscosity with suitability for the following conditions: – low speed, n = 10-30 rpm – high load, P/C = 0.25 - 0.50 – bearing temperature approx. 50-70 °C – shock loading and vibration Owing to its excellent lubricating properties, Klüberlub BE 41-1501 can also be used successfully for the lubrication of pivoting bearings, plain bearings and industrial gear couplings.

CASSIDA FLUID WG 220

High performance, synthetic gear lubricant for worm gear boxes used in the food & beverage processing equipment

CASSIDA FLUID WG 220 main applications:

• Especially recommended for use in worm gears and applications where excellent thermal stability is required
• Lubrication of enclosed gear boxes used in the food industry
• High load carrying capability, for extreme pressure applications

CASSIDA FLUID WG 220, 320, 460 and 680 are high performance, anti-wear gear oils for the lubrication of worm gears, highly loaded gears and applications where high resistance to micro-pitting is needed, for the use in food and beverage processing equipment. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID WG 220 drops automatically in larger quantities.

Foodgrade - Fuchs Cassida Fluid WG 460

Properties

Fully synthetic, high-performance gear lubricants for worm gear boxes. High resistance to micro-pitting. Provides exceptional thermal stability and corrosion protection. Exceptional low-friction characteristics providing efficient power transmission.

Meets DIN 51717 CLP and ISO 6743.

Foodgrade Fuchs Casssida Fluid WG 680

Properties

Fully synthetic, high-performance gear lubricants for worm gear boxes.

High resistance to micro-pitting. Provides exceptional thermal stability and corrosion protection. Exceptional low-friction characteristics providing efficient power transmission. 

Meets DIN 51717 CLP and ISO 6743.

CASSIDA FLUID WG 320

High performance, synthetic gear lubricant for worm gear boxes used in the food & beverage processing equipment

CASSIDA FLUID WG 320 main applications:

• Especially recommended for use in worm gears and applications where excellent thermal stability is required
• Lubrication of enclosed gear boxes used in the food industry
• High load carrying capability, for extreme pressure applications

CASSIDA FLUID WG 320 are high performance, anti-wear gear oils for the lubrication of worm gears, highly loaded gears and applications where high resistance to micro-pitting is needed, for the use in food and beverage processing equipment. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID WG 320 drops automatically in larger quantities.

Aeroshell Turbine Oil 390

AeroShell Turbine Oil 390 is a 3 mm2 /s synthetic diester oil incorporating a carefully selected and balanced combination of additives to improve thermal and oxidation stability and to increase the load carrying ability of the base oil.

Application Aeroshell Turbine Oil 390

AeroShell Turbine Oil 390 was developed primarily as an improved 3 mm2 /s oil for British turbo-jet engines. AeroShell Turbine Oil 390 is fully approved for a wide range of turbine engines. · More recently, because of the low temperature characteristics of AeroShell Turbine Oil 390, there is interest in using this oil in auxiliary power units (APU) in order to overcome the effects of cold soak. Normal practice is to shut down the APU during cruise, the APU then experiences cold soak, often prolonged, and when the unit is started there is considerable difficulty resulting in the unit not coming up to speed in the given time, thus causing a hung start. In such cases where the APU is subject to a long cold soak the viscosity of standard 5 mm2 /s oils used in the APU will increase from 5 mm2 /s at 100°C to typically 10,000 mm2 /s at –40°C . At this much higher viscosity the oil cannot flow easily leading to a large viscous drag within the APU, thereby contributing to the difficulty in starting. AeroShell Turbine Oil 390 on the other hand experiences a much smaller viscosity increase (typically 2000 mm2 /s at –40°C ) with a reduction in viscous drag which is often sufficient to overcome hung start problems. All experience to date shows a considerable improvement in cold reliability of the APU when AeroShell Turbine Oil 390 is used.