Lubricants

CASTROL RUSTILO 181

Corrosion Preventive Fluid

Application of CASTROL RUSTILO 181

Castrol Rustilo 181 is a corrosion preventive fluid that, after evaporation, leaves behind a thin hard yet flexible film. It is ideal for providing long-term protection to products under extreme conditions.

Rustilo 181 can be used during storage and transport when you need to protect parts against corrosion for an extended period. It is suitable for all metals and can be applied by dipping, brushing/rolling, or using a spray installation.

Shell Naturelle S2 HF 32 previously Shell Naturelle HF-E 32

Fully Synthetic, Biodegradable, Less-flammable Hydraulic Fluid

Shell Naturelle HF-E 32 main applications:

• Mobile / exterior hydraulic applications
• General industrial control equipment and hydraulic systems
• Environmentally sensitive areas
• Industrial operation subject to fire hazards
  

Shell Naturelle Fluid HF-E 32 is an advanced biodegradable and HFDU type less flammable hydraulic fluid for use in hydraulic and power transmission systems. Shell Naturelle Fluid HF-E 32 is readily biodegradable with a low ecotoxicity, particularly suited for use in environmentally sensitive areas and in industrial equipment operating in areas subject to fire hazards, such as in steel mills, surface mines and foundries.

Pay attention! Price of Shell Naturelle HF-E 32 drops automatically in larger quantities.

Shell Corena S4 P100 compressor oil (Formerly Shell Corena AP 100)

High-quality synthetic lubricating oil for compressed air piston compressors

Main uses of Shell Corena S4 P100 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S4 P 100 is a high-quality synthetic oil composed of synthetic esters and unique high-quality additives. It has been developed for excellent lubrication of compressed air suction compressors, in which discharge temperatures may exceed 220C.

Please note ! Price Shell Corena S4 P 100 drops automatically with larger quantities.

HOUGHTON HOCUT 5019

Water soluble metalworking fluid

Application HOUGHTON HOCUT 5019

HOCUT 5019 is recommended for grinding of cemented tungsten carbide tools where cobalt is used as a binder. The synthetic formula contains a special additive package to prevent dissolution of cobalt by the coolant also contains polymer lubricity additives to improve wheel life and prevent dry evaporation residues on machines. A minimum concentration of 5% is recommended.

Shell Corena S4 R 32 (Formerly Shell Corena AS 32)

The top in synthetic screw compressor oil

Benefits of Shell Corena S4 R 32 are:

• + 1.5x longer oil life than Corena S3 R 32
• + No deposits at high operating temperatures
• + Excellent water-separating power
• + Best anti-wear properties improve the life of the compressor
• + Excellent air separation and minimum foaming

Shell Corena S4 R 32 is a synthetic lubricating oil specially developed for lubrication of oil-injected rotary screw compressors for air with one or two stages.

Castrol Transmax Manual Z Long Life 75W-80 previously CASTROL Syntrans Z Long Life 75W-80

Manual Transmission Fluid

Shell Gadus S2 OG 40 Previous Name: Malleus Grease GL 95

Superior Performance Open Gear Greases

Shell Gadus S2 OG 40 main applications:

• Heavily loaded open gears, particularly those found in grinding mills, kilns, shovels, draglines, ship loaders, stackers and reclaimers and excavator applications. When choosing a product to suit your ambient temperature conditions, always consult with your Shell representative for the appropriate grade.
• Multi-service lubricant that can be used as the one grease (multipurpose and open gear) for the entire machine on most shovels, excavators and draglines (excluding electrical motors bearings).
• Surface dressing of slow moving gears open to the atmosphere.
• Plain bearings, pivot pins/bushings & articulations found in earth moving equipment.
• Mooring, static and slow moving wire ropes including those intermittently immersed in salt water.
• Wide variety of heavy-duty mining and industrial applications.

Please note!! Price of Shell Gadus S2 OG 40 drops automatically in larger quantities.

Klüber Klüberfood NH1 CH 2-220

High-temperature chain oils for the food and pharmaceutical industries

Application Klüber Klüberfood NH1 CH 2-220

The Klüberfood NH1 CH 2 oil series has been designed for lubrication of all drive, control and transport chains subject to high temperatures and loads.They are particularly used for chains in baking ovens and other high- temperature chain applications in the food-processing industry

TITAN ATF CVT

Ultra high-performance fluid specially designed for use in many CVT-gearboxes using push-belts or transmission chains made of steel.

TITAN ATF CVT field of applications:

TITAN ATF CVT has been tested successfully to be used in many CV-Transmissions of various brands (e.g. Audi Multitronic). TITAN ATF CVT has been developed the latest generation of Mercedes Benz CVT transmissions called Autotronic. Manufacturer’s oil drain intervals are mandatory. TITAN ATF CVT is miscible and compatible with conventional branded gear oils. However, mixing with other gear oils should be avoided in order to fully utilize the product’s benefits. A complete oil change is recommended when converting to TITAN ATF CVT. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.

Please note!! Price of TITAN ATF CVT drops automatically in larger quantities.

Shell Spirax S5 ATE 75W-90 Previous Name: Shell Transaxle Oil 75W-90

Premium performance, synthetic technology, GL-4/5 Spirax S5 ATE 75W-90 for sports cars

Spirax S5 ATE 75W-90 main applications:

• Transaxle transmissions
• Automotive transmissions

Shell Spirax S5 ATE 75W-90 is particularly designed to fulfil the highest requirements of extremely loaded passenger car drive train systems.

Please note!! Price of Spirax S5 ATE 75W-90 drops automatically in larger quantities.

Klüber Klübersynth UH1 64-1302

Synthetic lubricating grease for the food and pharmaceutical industry

Application Klüber Klübersynth UH1 64-1302

Good adhesiveness, excellent protection against wear and strong resistance to steam and water make Klübersynth UH1 64-1302 ideal for the following applications: high-load lowspeed rolling and plain bearings, joints, toothed racks, tubular tracks, cams, stuffing boxes, high-load and grease-lubricated chains, etc

Foodgrade - Fuchs Cassida Fluid Silicone

Properties

Silicone-based, fully synthetic, multi-purpose fluid.

Thermal stability up to 250 °C.

Excellent adhesive properties minimise fling-off in use and wash-off by both cold and hot water.

Readily displaces water.

Formulated for use on metal-to-non-metal or non-metal-to non-metal contact surfaces.

Application 

For lubrication of conveyors; slow rotating machinery;

Small, slow-speed bearings and pivot points found in equipment in the food industry.

Shell Gadus S5 V142W 00 Previous Name: Tivela Grease GL 00 & Tivela Compound A

Advance Performance Semifluid Gear Grease

Shell Gadus S5 V142W 00 main applications:

• Small industrial gear units
• Worm gears the low steel/tin-bronze frictional characteristics of Shell Gadus S5 V142W make it particularly suitable for worm gears having this combination of alloys.
• Steel/Aluminium-bronze: Shell Gadus S5 V142W is not recommended for the combination steel/aluminium- bronze, for which a grease based on a higher viscosity mineral oil is preferred.
• Flushing and filling with Shell Gadus S5 V142W: is a synthetic polyglycol based lubricant and must not be mixed with mineral oils. Care should be taken when changing over from oil or conventional grease. Flushing with a thin mineral oil will ensure, as far as possible, freedom from solid contaminants and deterioration products resulting from previous use of gear oils or greases. It is important to ensure that none of the flushing oil remains in the gearbox. When refilling the gearbox with Shell Gadus S5 V142W every precaution should be taken to ensure complete cleanliness. For optimum performance from both gearbox and lubricant, only the amount recommended by the gearbox manufacturer should be used.
• Paints. High quality red lead or epoxy resin paints are recommended for use in contact with Shell Gadus S5 V142W, as the synthetic polyglycol component will tend to attack certain conventional paints.
• Seals. Shell Gadus S5 V142W may be used satisfactorily with all normal seal materials. Leather seals are not recommended as the natural fats tend to be removed, leaving the seals thin and brittle.

Shell Gadus S5 V142W is a synthetic, semi-fluid gear lubricant developed to meet the highest requirements of industrial gearboxes allowing long life trouble free operation.

Please note!! Price of Shell Gadus S5 V142W 00 drops automatically in larger quantities.

Houghton MWS Additive AF 2290

MWS Additive AF 2290 is an effective defoamer for water-containing mineral oils and mineral oil-free cooling lubricants. 

Properties

MWS Additive AF 2290 is usually at a concentration of 0.01 - 0.02% . 

Before each new addition is necessary to wait until a thorough mixing has occurred.

The defoamers should be added as long as until a sufficient foam collapse occurred (use concentration max. 0.05%). 

The defoamer is premixed with water or used as an emulsion.

CASSIDA GREASE HTS 2

High temperature grease for food & beverage processing equipment

CASSIDA GREASE HTS 2 main applications:

• Grease lubrication where operating temperatures are up to short time peaks of 220°C
• Plain and rolling element bearings
• Centralised automatic lubrication systems
• Joints, linkages and slides

CASSIDA GREASE HTS 2 is based on a clay thickener and therefore not compatible with greases based on other thickener systems.

CASSIDA GREASE HTS 2 is a high performance high temperature lubricant specially developed for the grease lubrication of machinery in the food and beverage processing and packaging industry. It is based on a bentonite/clay thickener, synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA GREASE HTS 2 drops automatically in larger quantities.

CASTROL Iloform PN 403

Chlorine free vanishing oil

Application CASTROL Iloform PN 403

Iloform PN 403 is specially formulated for use in light duty sheet metal stamping operations where very low residues are required, in most cases eliminating the need for inter process cleaning. It is specifically suitable for stamping of low to medium collar height aluminium fins, in the refrigeration industry and shows excellent compatibility with the industries special requirements.

CASTROL Optigear BM 150

High Performance Gear Oils

Application CASTROL Optigear BM 150

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 150 drops automatically in larger quantities.

TOTAL CARTER SG 220 previous Carter SY 220

Ultra high performance synthetic gear oil.

Applications TOTAL CARTER SG 220

CARTER SG is a new generation of very high-performance synthetic gear lubricant for standard, crown, planetary, and worm gearboxes. The new polyalkylene glycol base oil technology provides a very high EP performances, very low friction coefficient and high sliding performances.

Your advantage! Price of TOTAL CARTER SG 220 drops automatically in larger quantities.

Shell Spirax S4 G 75W-90

Shell Spirax oils are designed to help keep your transmission components protected so that they can go on working efficiently.

Properties

Shell Spirax S4 G 75W-90 is a Synthetic gear oil designed for VW cars and vans.

CASTROL Performance Bio HE 32

Biodegradable hydraulic oil

Application CASTROL Performance Bio HE 32

Performance Bio HE is intended for use in all hydraulic systems, where there is a risk that leaking fluid will contaminate ground water and the sewage system, such as in earthmoving machinery, refuse collection lorries, agricultural and forestry machinery, rail vehicles, presses and wrapping machines. Thanks to the carefully selected base oil, it can be used up to +120 °C. The viscosity index has a high value which means that the viscosity of the product depends relatively little on the temperature. The environmentally friendly nature, measured according to the CEC L-33-A-93 test is >90%. Performance Bio HE is not miscible with water. Performance Bio HE is miscible with hydraulic fluids based on mineral oil and vegetable or synthetic esters. Nevertheless, when switching from mineral oil based hydraulic fluids to Performance Bio HE it is recommended to empty the system completely as mixing with mineral oil reduces biodegradability and may lead to foaming problems. Performance Bio HE meets the requirements according to VDMA 24568 for a HEES (Hydraulic Environmental Ester Synthetic).