Buy Lubricants — mineral, synthetic, dry & adhesive

Total Nevastane XMF 1

Multi-purpose extreme pressure greases, suitable for incidental food contact.

Applications Total Nevastane XMF 1

• NEVASTANE XMF is an aluminum complex grease with white oil having excellent extreme pressure and anti-rust properties over a wide temperature range.
• NEVASTANE XMF range is also highly resistant to water wash out and to high speed conditions.
• NEVASTANE XMF greases are recommended for the lubrification of food and beverage processing machinery operating under severe conditions such as loaded gears and bearings, seamers, filling machines, conveyors, mixers.
• NEVASTANE XMF greases present a wide operating temperature range: -20°C to +150°C.

TOTAL BIOHYDRAN TMP 46

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 46

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 46 drops automatically in larger quantities.

TOTAL DACNIS SH 68

PAO Synthetic oils for rotary air compressors.

Applications TOTAL DACNIS SH 68

• Lubrication and cooling of the following types of air compressors: - rotary screw compressors (ISO VG 32, 46, 68) - reciprocating compressors (ISO VG 100).
• Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars.
• Recommended for the lubrication of gears, plain and roller bearings working under severe conditions, where a CKS level is required.

Your advantage! Price of TOTAL DACNIS SH 68 drops automatically in larger quantities.

Total Nevastane EP 220

Gear oils, suitable for incidental food contact

Applications Total Nevastane EP 220

• NEVASTANE EP formulation is based on white mineral oils, synthetic oils, and high performances additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.
• NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
• NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.

Total Nevastane EP 320

Gear oils, suitable for incidental food contact

Applications Total Nevastane EP 320

• NEVASTANE EP 320 formulation is based on white mineral oils, synthetic oils, and high performances additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.
• NEVASTANE EP 320 oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
• NEVASTANE EP 320 oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.

Total Nevastane EP 460

Gear oils, suitable for incidental food contact

Applications Total Nevastane EP 460

• Nevastane EP 460 formulation is based on white mineral oils, synthetic oils, and high performances additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.
• Nevastane EP 460 oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
• Nevastane EP 460 oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.

Mobil Univis HVI 13

Hydraulic Oils

Application Mobil Univis HVI 13

Hydraulic systems critical to uniform hydraulic oil viscosity over a wide temperature range. Hydrostatic transmissions and dash pots. They can also be used in fine instruments and other mechanisms where power input is limited and increases in torque due to the lubricant thickening cannot be tolerated. To reduce deposit formation in equipment where close clearance servo-valves are used. Systems where cold start-up and high operating temperatures are typical. Systems requiring a high degree of load-carrying capability and anti-wear protection. Applications where rust and corrosion protection are an asset such as systems where small amounts of water are unavoidable

Q8 Heller 46

Applications 

Q8 Heller 46 is designed for use in off highway equipment and other hydraulic systems exposed to wide temperature fluctuations.

References

Q8 Heller 46 meets the requirements of most off highway equipment manufacturer. The zinc based additive package meets Denison HF-0, HF-1 and HF-2 requirements

Summary of Main Features and Benefits Q8 Heller 46 

Optimum anti-wear performance, based on a zinc diakyldithiophosphate additive 

Wide application temperature range through low pour point and outstanding low and high temperature viscosity characteristics 

Trouble-free operation due to the unique combination of outstanding demulsibility, foam, air release, hydrolytic stability and filterability 

Long term stable fluid viscosity through excellent shear stability characteristics of the selected viscosity index improver 

Shell Gadus S2 V220 00 Previous Name: Alvania Grease EP(LF) 00, GL 00, Shell Retinax CS 00

High Performance Multipurpose Extreme Pressure Grease

Shell Gadus S2 V220 00 main applications:

• Steel mill lubrication where a softer grease is necessary for specialised dispensing systems.
• Heavy duty plain and rolling element bearings operating under severe conditions including shock loading in wet environments
• Gearbox applications where semi-fluid greases are required.
• Centralized chassis lubrication systems on trucks and buses.

Klüber Klüberoil 4 UH1-220 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-220 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

Klüber Klüberfood NH1 94-6000

Synthetic fluid gear grease for the food processing and pharmaceutical industries

Application Klüber Klüberfood NH1 94-6000

Klüberfood NH1 94-6000 was especially developed for applications in machines and installations of the foodprocessing and pharmaceutical industries where incidental contact with your product cannot be excluded. Klüberfood NH1 94-6000 is used e.g. as a fluid gear grease for the immersion lubrication of toothed and worm gears or chains that run more smoothly with a soft grease.

CASTROL Aircol PD 100

Rotary Screw Compressor Lubricant

Application CASTROL Aircol PD 100

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

Shell Tellus S4 VX 32 Previous Name: Shell Tellus Arctic

Special Application Hydraulic Fluid Low Temperatures

Shell Tellus S4 VX 32 main applications:

• Low temperature exterior hydraulic applications
• Shell Tellus S4 VX 32 has been designed for use in all types of hydraulic systems where the operating temperature does not continuously exceed 75C.
• Shell Tellus S4 VX 32 has been specifically designed for systems that must be started-up at extremely low temperatures, with a subsequent temperature increase during operation.

Shell Tellus S4 VX 32 is an advanced hydraulic fluid technology designed for use in applications subjected to extremely low ambient temperatures such as arctic or exposed areas.

Pay attention! Price of Shell Tellus S4 VX 32 drops automatically in larger quantities.

CASTROL Transmax Transaxle 75W-90 previously Syntrans Transaxle 75W-90

Manual Transmission Fluid - Transaxle

TOTAL FINASOL BAC

Fast evaporating industrial degreaser

Applications TOTAL FINASOL BAC

• Degreasing of machine parts
• Degreasing of machine-tool frame chassis
• Cleaning of bearings, drive gears and filters.
• Industrial maintenance.
• Cleaning of injection molds.
• Cleaning after storage.
• Preparation of surfaces before assembly.

Your advantage! Price of TOTAL FINASOL BAC drops automatically in larger quantities.

Castrol Vecton Long Drain 10W-40 E6/E9

Helps maximise performance

Application Castrol Vecton Long Drain 10W-40 E6/E9

Castrol Vecton Long Drain 10W-40 E6/E9 is designed for extended drain in the latest Euro 6 diesel engines. It can also be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Your advantage! Price of Castrol Vecton Long Drain 10W-40 E6/E9 drops automatically in larger quantities.

Spirax S4 AT 75W-90 Previous Name: Shell Spirax X 75W-90

High performance, synthetic blend, GL-4/5 oil for gearboxes and axles

Spirax S4 AT 75W-90 main applications:

• Automotive transmissions
• Universal driveline

Shell Spirax S4 AT 75W-90 is a part-synthetic superior quality automotive gear lubricant specially designed for use in gearboxes and axles.

Please note!! Price of Spirax S4 AT 75W-90 drops automatically in larger quantities.

CASTROL Hyspin AWH-M 32

High viscosity index anti-wear hydraulic oils

Application CASTROL Hyspin AWH-M 32

Hyspin AWH-M contains a shear stable additive system which helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. It exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent hydrolytic stability and separates rapidly from water contamination upon standing. Applications include: Outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin AWH-M range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin AWH-M is classified as follows: DIN 51502 classification – HVLP ISO 6743/4 - Hydraulic Oils Type HV Hyspin AWH-M grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 3 Cincinnati Lamb (Milacron) P 68-69-70 Denison (Parker Hannafin) HF-0 US Steel 126 & 127 Eaton (formerly Vickers) I-286-S & M-2950-SBosch Rexroth RE07075/RE90220

Your advantage! Price of CASTROL Hyspin AWH-M 32 drops automatically in larger quantities.

Houghton Garia 601 M-22

It is based on hydro treated mineral oils with a low aromatic content.It's formulated to a combination of polar, extreme pressure and anti-wear additives.

Properties

Its composition gives the oil high load carrying properties. Its high additive content and controlled extreme pressure properties allow high rates of metal removal, which results in reduced machining costs.

The oil provides good tool life and excellent surface finish of the machined work pieces. Efficient anti mist additives reduce mist in the air.

Due to its active sulphur content, the oil may discolor yellow metals.

Application

Garia 601 M-22 is recommended for machining high alloyed steels, stainless, heat resistant or austenitic steels and aluminum or magnesium alloys. The oil gives excellent results with many difficult operations such as broaching, deep-hole drilling, tapping, shaping or shaving of gears.