Buy Lubricants — mineral, synthetic, dry & adhesive

ANTICORIT VCI UNI O 40 (previous Shell VSI 8235)

Vapor phase inhibitor, oily, multi metal

ANTICORIT VCI UNI O 40 field of applications:

ANTICORIT VCI UNI O 40 is a VCI corrosion prevention oil (concentrate) which is miscible with gasoline, mineral and synthetic oils and diesel. It burns without forming ashes, therefore it is typically not necessary to remove the ANTICORIT VCI UNI O 40 when the tanks/gears are used again.

Please note!! Price of Fuchs Anticorit VCI UNI O 40 drops automatically in larger quantities.

Total Nevastane XSH 460

Synthetic (PAO) gear oils, suitable for incidental food contact

Applications Total Nevastane XSH 460

• NEVASTANE XSH oils (grades 150 to 460) are recommended for the lubrication of gear reducers, plains and roller bearings with high loads in the food processing industries.
• NEVASTANE XSH 150 to 460 oils are also suitable for the lubrication of numerous applicacations in the food industry such as chains and conveyor belts.
• NEVASTANE XSH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

TOTAL CARTER SH 1000

Synthetic oil (PAO) for enclosed gears.

Applications TOTAL CARTER SH 1000

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.

• bevel and spur gears
• Heavily loaded bearings and gear couplings.

Your advantage! Price of TOTAL CARTER SH 1000 drops automatically in larger quantities.

Shell PANOLIN S4 HLP Synth EAL 68

Hydraulic Fluid – high-performance, readily biodegradable, saturated synthetic esters

Application of Shell PANOLIN S4 HLP Synth EAL 68

Shell PANOLIN S4 HLP Synth EAL is formulated with zinc-free additive technology and high-quality fully saturated synthetic esters to provide an excellent combination of lubrication performance and environmental acceptability. Readily biodegradable with low ecotoxicity, Shell PANOLIN S4 HLP Synth EAL hydraulic fluids are particularly suitable for use in environmentally sensitive areas where eco-label compliance is required, including U.S. waters. Intended for use in both stationary and mobile hydraulic systems, including marine and deck equipment, construction, and forestry.

Castrol Vecton Long Drain 5W-30 E7 previously Fuel Saver 5W-30 E7

Fuel-saving engine oil

TotalEnergies Planetelf ACD 220FY – refrigeration compressor oil for HFC refrigerants

Broad compatibility with HFC refrigerants

Planetelf ACD 220FY is compatible with various HFC refrigerants, including R134a, R404A, R407C, R410A, R507 and R23.

Shell Corena S4 P68 compressor oil (Formerly Shell Corena AP 68)

High-quality synthetic lubricating oil for compressed air piston compressors

Main uses of Shell Corena S4 P68 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S4 P 68 is a high-quality synthetic oil composed of synthetic esters and unique high-quality additives. It has been developed for excellent lubrication of compressed air suction compressors, in which discharge temperatures may exceed 220C.

Please note ! Price Shell Corena S4 P 68 drops automatically with larger quantities.

Fuchs Cassida FM GREASE DC 2

Specialty direct contact, multifunctional grease for food processing applications in the food manufacturing industry

Applications Cassida FM GREASE DC 2

• Ideal for use as a direct food contact release agent
• Release agent for grills, loaf pans, cutters, boning benches, chopping blocks and other hard surfaces to help prevent food from adhering during processing
• Lubrication and protection of seals, guides, bearings and blades operating in food, pharmaceutical and other clean environments where direct food contact is inevitable

FUCHS Cassida FM Grease DC 2

Specialty direct contact, multifunctional grease for food processing applications in the food manufacturing industry

Application FUCHS Cassida FM Grease DC 2

Ideal for use as a direct food contact release agent. Release agent for grills, loaf pans, cutters, boning benches, chopping blocks and other hard surfaces to help prevent food from adhering during processing. Lubrication and protection of seals, guides, bearings and blades operating in food, pharmaceutical and other clean environments where direct food contact is inevitable.

PANOLIN HLP SYNTH 15

Hydraulic fluid, readily biodegradable – saturated synthetic ester basis

Benefits of Panolin HLP Synth 15 are:

• Fully synthetic high-performance hydraulic fluid, zinc-free and environment-friendly, on synthetic ester basis with special additives
• Prevents gumming and deposits of ageing products, even at high temperatures
• Extremely long oil-change interval «lifetime filling»
• Reduces CO2 emissions
• Far greater reserve capacities than conventional hydraulic oils
• Outstanding high-pressure characteristics
• Excellent cold flow characteristics (extremely low pour point)
• Oxidation-resistant at high temperatures

CASTROL Optigear BM 320

High Performance Gear Oils

Application CASTROL Optigear BM 320

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 320 drops automatically in larger quantities.

Total Planetelf ACD 32

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

Applications Total Planetelf ACD 32

• Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23
• PLANETELF ACD 32, 46 and 68 are suitable for piston compressors
• PLANETELF ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

RENOLIT CX-HT 0

RENOLIT CX-HT 0 field of applications:

RENOLIT CX-HT 0 is used for the lubrication of high loaded, low speed plain and roller bearings, open gears and gear wheels. RENOLIT CX-HT 0 is usable in a wide temperature range, does not drip off in summer, and does not harden at low ambient temperature.

Please note!! Price of RENOLIT CX-HT 0 drops automatically in larger quantities.

Mobil SHC 627

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 627 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 627 is suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
   

Pay attention! Price of Mobil SHC 627 drops automatically with higher volumes.

TOTAL BIOHYDRAN SE 46

High thermal stability biodegradable hydraulic fluid

Applications TOTAL BIOHYDRAN SE 46

• Based on saturated synthetic esters BIOHYDRAN SE is designed for demanding hydraulic systems requiring hydraulic fluids with a high thermal stability and good lubricating properties.
• The excellent biodegradability and low eco toxicity make BIOHYDRAN SE particularly suitable when incidental spillages in environmentally sensitive areas can occur : forestry works, public works, water navigation, off-shore, water catchments areas, ski resorts, etc

Your advantage! Price of TOTAL BIOHYDRAN SE 46 drops automatically in larger quantities.

Klüber Paraliq P 40

Lubricating oils for the food and pharmaceutical industries

Application Klüber Paraliq P 40

PARALIQ P 12 and P 40 can be used for machines in the foodprocessing and pharmaceutical industries requiring medically pure oils, e.g. spindles, joints, chains, gearwheels, plain bearings, pistons, guides and tubular tracks. The oils can also be used for corrosion protection. PARALIQ P 12 can also be used as a heat transfer oil in enclosed systems in the food-processing, pharmaceutical and cosmetics industries.

Castrol Transmax Universal LL 80W-90 previously Syntrax Universal 80W-90

Universal fluid for manual transmissions and axles

Mobil Gargoyle Arctic SHC 224

Refrigeration compressor oil

Application Mobil Gargoyle Arctic SHC 224

The Mobil Gargoyle Arctic SHC 200 Series are fully synthetic lubricants specifically designed for use in refrigeration compressors and heat pumps. Application consideration: Although Mobil Gargoyle Arctic SHC 200 Series is compatible with mineral oil based products, blending will affect performance. Systems should therefore be thoroughly rinsed and cleaned when replacing a mineral product with a Mobil Gargoyle Arctic SHC 200 Series product. In the case of R22 refrigerants always refer to the refrigerant manufacturer's guidelines to ensure that it is suitable for efficient separation of the oil and refrigerant.

Castrol Spheerol LCX 222

Multi-purpose grease

Application Castrol Spheerol LCX 222

Spheerol LCX 222 is a NLGI 2 grade heavy duty grease, recommended for industrial bearings in severe applications and provide protection against: Shocks and vibrations. Water washout, water ingress. Corrosive environment, as in mill applications

Your advantage! Price of Castrol Spheerol LCX 222 drops automatically in larger quantities.

Houghton Ensis DW 2462 (formerly Shell Ensis SX)

Ensis DW2462 is a rust inhibitor with drainage properties for medium protection

Ensis DW 2462 is a rust inhibitor with a medium-term protection duration (up to 24 months within storage). Ensis DW 2462 is a solvent-based anti-rust agent with dewatering properties that, after evaporation of the solvent, leaves a temporary waxy film on the metal surfaces to be protected.
Ensis DW 2462 protects metal parts in an efficient way against the damaging effects of humidity, air, detergents and other contaminants. Ensis DW 2462 can be applied by means of immersion or spraying.

Advantages of Houghton Ensis DW 2462 (formerly Shell Ensis DW 2462)are:

• + Protection duration:
  • Inside: 24 months
  • Covered outside: 9-12 months
  • Unprotected outside: 6 months
• + Easy to remove with alkaline or solvent-based cleaners
• + Neutralized fingerprints
• + Short drying time leaves dry thin wax protection film