Klüber ISOFLEX NCA 15
97% supplied in 5 working days
Bank transfer or Credit Card (master card & visa) payment
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
UK Deliveries
incoterm DAP
QUESTIONS?
Klüber ISOFLEX NCA 15
Spindle bearing grease
Application Klüber ISOFLEX NCA 15
ISOFLEX NCA 15 is particularly suitable for the lubrication of spindle and tapered roller bearings, threaded spindles, ball screws subject to high loads, and for all high-speed bearings, e.g. bearings in OE-spinning turbines used in the textile industry.
Performance, Features & Benefits of Klüber ISOFLEX NCA 15 are:
- Longer rolling bearing life due to good wear protection, water resistance and pressure absorption capacity
- Tried and tested over many years especially in high-speed and low-temperature applications
- Low heating-up of bearings due to low lubricant friction leading to longer service life
- Low running torque enables energy savings, particularly at low temperatures, hence costs savings possible
If you have any questions, please contact OlieOnline Technical Helpdesk
Product Description KKlüber ISOFLEX NCA 15
ISOFLEX NCA 15 is a dynamically light grease with good pressure absorption properties for plain and spindle bearings. It consists of ester oil, synthetic hydrocarbon oil, mineral oil and special calcium soap. The product is resistant to water and protects reliably against wear.
Typical Characteristics
| Product specifications : | Klüber ISOFLEX NCA 15 | |
| Article number | 004180 | |
| Chemical composition, type of oil | mineral oil | |
| Chemical composition, type of oil | ester oil | |
| Chemical composition, thickener | special calcium soap | |
| Texture | short-fibred | |
| Texture | homogeneous | |
| Lower service temperature | -50 °C / -58 °F | |
| Upper service temperature | 120 °C / 248 °F | |
| Colour space | beige | |
| Density at 20 °C | approx. 0.94 g/cm³ | |
| Worked penetration, 25 °C, lower limit value | DIN ISO 2137 | 265 x 0.1 mm |
| Worked penetration, 25 °C, upper limit value | DIN ISO 2137 | 295 x 0.1 mm |
| Kinematic viscosity of the base oil, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 21 mm²/s |
| Kinematic viscosity of the base oil, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 4.5 mm²/s |
| Speed factor (n x dm) | approx. 1 300 000 mm/min | |
| Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value | 8 000 mPas | |
| Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value | 3 500 mPas | |
| Corrosion inhibiting properties of lubricating greases, (SKF-EMCOR), test duration: 1 week, distilled water |
DIN 51802 | <= 1 corrosion degree |
| Low-temperature torque, -50 °C, start | IP 186 | <= 1 000 mNm |
| Low-temperature torque, -50 °C, running | IP 186 | <= 120 mNm |
| Drop point, | DIN ISO 2176, IP 396 | >= 180 °C |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
The lubricant is applied by brush, spatula, grease gun or grease cartridge. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application.
Discover the benefits of OilOnline!
Are you looking to buy oil from OilOnline? Then you can take advantage of many benefits:
Our knowledge
is your strength!
At OilOnline, we have a team of passionate lubricant specialists with extensive knowledge and experience.
Detailed
advice
Our experts will assist you in choosing the best products, so you can get the most out of your vehicle or machine.
Uncompromising
Quality
At OilOnline, we only offer lubricants from globally renowned quality brands.
Save on
Lubricants
By ordering larger quantities, you can take advantage of price benefits at OilOnline.