Tractor & Yellow Goods

'Heavy Duty' Diesel 15W40 motor oil

Shell Rimula R4 L 15W40 contains "Low-SAPS" additives technology and offers low emission engines protection under the most severe conditions.

Main uses of Shell Rimula R4L 15W-40 are:

• Off-highway applications,
  Suitable for use in the agricultural and construction sector.
   
• Heavy duty 'Heavy Duty' diesel engines
  Rimula R4L 15W40 saves maintenance costs through longer service life of soot filters and catalysts.

See all Rimula R4 L 15W-40 approvals at the bottom of this page.

Shell Rimula R4 X 15W-40 previous Shell Rimula R3 X 15W-40

Heavy Duty Diesel 15W40 Engine Oil

Shell Rimula R4 X 15W-40 main applications:

• Severe duty heavy duty diesel engines
  Shell Rimula R4 X 15W40 provides demonstrated protection and performance in the latest high power heavy-duty diesel engines from European, US and Japanese manufacturers in both on-highway and off-highway applications.
   
• High Technology Low Emission Engines
  Shell Rimula R4 X 15W40 is suitable for most modern low emission engines meeting Euro 5, 4, 3, 2, and US 2002 emission requirements. 

Shell Rimula R4 X 15W40 is designed to provide Triple Protection to improve engine and oil durability. It helps to lower maintenance and increase the reliability of vehicles. Shell Rimula R4 X 15W40 is suitable for most heavy-duty diesel engines for on off-highway applications.

Please note! Shell Rimula R4 X 15W-40 price drops automatically in larger quantities.

Shell Rimula R6 LM 10W-40

Fully Synthetic Heavy Duty Diesel Engine Oil 10W40

Shell Rimula R6 LM 10W-40 main applications:

• On-highway heavy duty applications
• Low emission engine use
• CNG engine oil performance

Shell Rimula R6 LM 10W40 oil features “Low-SAPS” additive technology and unique anti-wear system. Protective power is enhanced with synthetic technology, resulting in maintenance saving long drain capability, exceptional wear and cleanliness performance.

Pay attention! Price of Shell Rimula R6 LM 10W-40 drops automatically in larger quantities.

Spirax S3 T Previous Name: Shell Harvella T 15W-40

Premium Performance, SAE 15W-40, Universal Tractor Oil

Spirax S3 T main applications:

• Universal performance
• Oil immersed brakes
• Powershift Transmissions
• Hydraulics
• Power Steering Systems
• Hydrostatic Transmissions
• Conventional Gear Drive Systems

Shell Spirax S3 T Oil is 'Super Tractor Oil Universal' (STOU) oil designed for use in a wide variety of modern agricultural equipment. They are a blend of high viscosity index base oils and an advanced additive package designed to give reliable performance in a wide range of farming applications.

Please note!! Price of Spirax S3 T drops automatically in larger quantities.

Shell Rimula R4 Multi 10W-30

Heavy-Duty Diesel Engine Oil

Shell Rimula R4 Multi 10W-30 main applications:

• Dedicated Diesel Engine Oil Performance Shell Rimula R4 Multi 10W-30 is the ideal choice for a wide range of turbo-charged and non turbo-charged engines under normal operation. It is particularly recommended for use in off-highway applications such as agricultural tractors and mining operations.
• For equipment fitted with diesel particulate filters, we recommend Shell Rimula R5 LE multigrade engine oil.

Shell Rimula R4 Multi oil protects against changing needs of driving conditions. This technology provides triple action protection: low wear for long engine life, low deposit formation to maintain engine performance and resist breakdown by heat.

Please note!! Price of Shell Rimula R4 Multi 10W-30 drops automatically in larger quantities.

Castrol Transmax Agri MP 15W-40 Previous Castrol Vanellus Agri Universal 15w40

Multi-functional tractor oil

Shell Rimula R6 M 10W-40

Fully synthetic 'Heavy Duty' Low SAPS Diesel engine oil

Benefits of Shell Rimula R6 M 10W-40 are:

• + Savings on maintenance
• + Lower maintenance costs (very long oil change intervals)
• + Low wear - long engine life

Shell Rimula R6 M 10W-40 full synthetic oil provides continuous protection resulting in extended oil change intervals, protection against wear caused by soot and deposits on the pistons and engine, and fuel saving. Shell Rimula R6 M 10W-40 is suitable for most Euro 4 and Euro 5 engines without a particulate filter.

Note ! Price Shell Rimula R6 M 10W-40 drops automatically with larger quantities.

CASTROL Transmax Agri MP Plus 10W-40

Super universal tractor oil

Your advantage! Price of CASTROL Transmax Agri MP Plus 10W-40 drops automatically in larger quantities.

Shell Spirax S4 TX Previous Name: Shell Harvella TX 10W-40

Premium Performance, SAE 10W-40, Universal Tractor Oil

Spirax S4 TX main applications:

• Universal performance - suitable for many types of tractor transmission/hydraulic systems
• Oil immersed brakes
• Powershift transmissions
• Hydraulics
• Power steering systems
• Hydrostatic transmissions
• Conventional gear drive systems

Shell Spirax S4 TX Oil is 'Super Tractor Oil Universal' (STOU) oil based on Shell’s XHVI base oil technology and an advanced additive package. Spirax S4 TX gives superior performance in engine, transmission and hydraulic applications for a wide range of agricultural equipment and applications.

Please note!! Price of Spirax S4 TX drops automatically in larger quantities.

CASTROL Transmax ATF Z previously Transmax Z

Automatic Transmission Fluid

CASTROL Hyspin AWS 100

Anti-wear Hydraulic Oil

Application CASTROL Hyspin AWS 100

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials. Hyspin AWS is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM. Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 2; Cincinnati Lamb (Milacron) P 68-69-70; Denison (Parker Hannafin); HF-0 US Steel 126 & 127; Eaton (formerly Vickers) I-286-S & M-2950-S; MB – Approval 341.

CASTROL Radicool NF Premix

Ready to use engine coolant and antifreeze

Application CASTROL Radicool NF Premix

Castrol Radicool NF premix has been developed using Hybrid Additive Technology to provide total protection for modern engine radiator systems, cylinder block heads, water pumps and heat exchangers . In the majority of cases, coolants are not compatible and should not be mixed with other coolants unless directed by the equipment manufacturer. If using Castrol Radicool NF Premix for the first time, ensure that the cooling system has been adequately flushed with clean water before use.

CASTROL Aircol PD 100

Rotary Screw Compressor Lubricant

Application CASTROL Aircol PD 100

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

CASTROL Hyspin AWH-M 15

High viscosity index anti-wear hydraulic oils

Application CASTROL Hyspin AWH-M 15

Hyspin AWH-M contains a shear stable additive system which helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. It exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent hydrolytic stability and separates rapidly from water contamination upon standing. Applications include: Outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin AWH-M range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin AWH-M is classified as follows: DIN 51502 classification – HVLP ISO 6743/4 - Hydraulic Oils Type HV Hyspin AWH-M grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 3 Cincinnati Lamb (Milacron) P 68-69-70 Denison (Parker Hannafin) HF-0 US Steel 126 & 127 Eaton (formerly Vickers) I-286-S & M-2950-SBosch Rexroth RE07075/RE90220

Your advantage! Price of CASTROL Hyspin AWH-M 15 drops automatically in larger quantities.

CASTROL Aircol PD 68

Rotary Screw Compressor Lubricant

Application CASTROL Aircol PD 68

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

CASTROL Perfecto X 46 previously Perfecto T 46

Turbine oils

Application CASTROL Perfecto X 46

The Perfecto X 46 lubricant is based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.

CASTROL Hyspin Spindle Oil E 5

Spindle Oils

Application CASTROL Hyspin Spindle Oil E 5

Castrol Hyspin Spindle Oils have been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. These types of oils are also referred to as "R and O" oils. Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. Spindle E5 has an additional oiliness agent for enhanced lubricity. Castrol Hyspin Spindle Oils are fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin Spindle Oils are classified as follows: DIN 51502 classification – HL ISO 6743/4 - Hydraulic Oils Type HL ISO 6743/2 – Spindle Oils Type FC Hyspin Spindle oils meet or exceed the following industry specifications: Cincinnati Lamb (formerly Milacron) P-45 (FC-22) - Spindle Oil 22 Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10 Cincinnati Lamb (formerly Milacron) P-65 (FC-2) - Spindle Oil 2

Your advantage! Price of CASTROL Hyspin Spindle Oil E 5 drops automatically in larger quantities.

CASTROL Perfecto X 32 previously Perfecto T 32

Turbine oils

Application CASTROL Perfecto X 32

The Castrol Perfecto X turbine oil range of lubricants is based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.

CASTROL Hyspin Spindle Oil 10

Spindle Oils

Application CASTROL Hyspin Spindle Oil 10

Castrol Hyspin Spindle Oils have been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. These types of oils are also referred to as "R and O" oils. Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. Spindle E5 has an additional oiliness agent for enhanced lubricity. Castrol Hyspin Spindle Oils are fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin Spindle Oils are classified as follows: DIN 51502 classification – HL ISO 6743/4 - Hydraulic Oils Type HL ISO 6743/2 – Spindle Oils Type FC Hyspin Spindle oils meet or exceed the following industry specifications: Cincinnati Lamb (formerly Milacron) P-45 (FC-22) - Spindle Oil 22 Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10 Cincinnati Lamb (formerly Milacron) P-65 (FC-2) - Spindle Oil 2

Your advantage! Price of CASTROL Hyspin Spindle Oil 10 drops automatically in larger quantities.