Shell

Shell Tellus S2 V46 (Formerly Shell Tellus T46) has been improved and is now called Shell Tellus S2 VX46 !

Hydraulic oil ISO VG 46 with wide temperature range

Examples of application of Shell Tellus S2 VX 46 are:

• + Hydraulic excavators and other earthmoving equipment
• + Port cranes and lifting equipment such as forklifts
• + Hydraulic driven equipment on board ships
• + Any mobile exterior hydraulic system

Shell Tellus S2 VX46 fluids are high-performance hydraulic fluids based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures. Shell Tellus S2 VX46 resist breakdown under heat or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.

Pay attention! Shell Tellus S2 VX 46 price falls automatically for larger quantities.

Previous Tellus S2 M46 and Tellus 46 hydraulic oil has been renewed and is now called Shell Tellus S2 MX46!

Hydraulic S1 HLP 46 selected by OlieOnline

Industrial Hydraulic Fluid

Hydraulic S1 HLP 46 is a DIN hydraulic oil from OlieOnline. This hydraulic oil offers cost-effective reliable protection and performance in industrial hydraulic applications.

Hydraulic S1 HLP 46 main applications:

• + Hydraulic systems – General usage
• + Older static systems
• + Other applications

Specifications, Approvals & Recommendations

• ISO 11158 (HM fluids) 
• DIN 51524 Part 2 HLP type
   

Pay attention! Price of Hydraulic S1 HLP 46 drops automatically in larger quantities.

Aeroshell Oil 100

Mineral lubricating oil for aircraft piston engines

Application Aeroshell Oil 100

AeroShell Oils are available in four different viscosity grades: · AeroShell Oil 65 - AeroShell Oil 80 - AeroShell Oil 100 - AeroShell Oil 120. The suffix for each grade corresponds to the viscosity of the oil at 210° F in Saybolt Universal Seconds. The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.

Previous name: Shell Tellus DO 46

High performance hydraulic oil with excellent cleaning properties

Advantages of the Tellus S2 MA 46 are:

• + Additional protection
• + Water resistant

Shell Tellus S2 MA 46 oils are modern ash-free mineral oil-based hydraulic fluids with excellent cleaning properties, excellent wear-resistance, excellent filterability and extremely good aging stability. Designed for applications where the sensitive components of hydraulic systems are exposed to increased contamination by foreign substances.

Shell Turbo Oil T 46

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo T 46 main applications:

• Industrial steam turbines & light duty gas turbines requiring no enhanced anti-wear performance for the gearbox
• Hydroelectric turbine lubrication
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 46 has long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo T 46 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.

Pay attention! Price of Shell Turbo Oil T 46 drops automatically in larger quantities.
Do you need more than 20x 209L ask for our special price

Shell Rimula R3+ 40 

Heavy Duty Diesel Engine Oil

Shell Rimula R3+ 40 main applications:

• Dedicated diesel engine oil performance Shell Rimula R3 monogrades have been formulated to provide robust engine performance in a variety of offhighway applications or older on-highway diesel vehicles.
• Construction industry application Engine oil technology is sometimes specified for use in transmission and hydraulic applications. Shell Rimula R3 monogrades offer premium performance and protection for these applications.
• Stationary equipment Shell Rimula R3 monogrades are suitable for certain stationary equipment, such as pumps, that run continuously under steady state conditions.

Shell Rimula R3 oils adapts to your driving needs to provide extra protection and keep pistons and other engine parts clean. It provides protection against wear for long engine life and protection against deposits for efficient engine performance..

Please note!! Price of Shell Rimula R3+ 40 drops automatically in larger quantities.

Shell Tellus S3 M 46

Premium Zinc-Free Industrial Hydraulic Fluid

Shell Tellus S3 M 46 main applications:

• Manufacturing and industrial hydraulic systems
• Severe duty hydraulic service
• Marine and mobile hydraulic systems
• Low toxicity towards the environment

Specifications, Approvals & Recommendations

Shell Tellus S3 M 46 fluids are suitable for use with most hydraulic pumps. ·Denison Hydraulics (HF-0, HF-1 and HF-2) Eaton Vickers (Brochure 694) ·Fives Cincinnati P-68 (ISO 46) ·ISO 11158 (HM fluids) ·DIN 51524-2 (HLP oils) ·ASTM 6158 (HM mineral oils) SS 15 54 34 M

Pay attention! Price of Shell Tellus S3 M 46 drops automatically in larger quantities.

Shell Tellus S2 VA 46 Previous Name: Tellus TD

Industrial Detergent Hydraulic Fluid for wide temperature range

Shell Tellus S2 VA 46 main applications:

• Mobile Equipment
  Earth moving equipment and similar units subjected to the most severe outdoor operating conditions.

HLPD Oil recommendations: All hydraulic systems for which an HLPD oil is specified.

• Engine Oil Hydraulic Applications
  Hydraulic systems which specify the use of engine oils meeting SAE 10W, 20W-20 or 30 viscosity classifications.
• Other applications
  Certain industrial gearboxes.
  
  

Shell Tellus S2 VA 46 is a high performance detergent-based hydraulic fluid for use where emusifiable fluids are preferred. Using proven zinc-based anti-wear technology Tellus S2 VA 46 provides proven performance in applications such as construction or mobile applications where contamination by water, cleanliness or control of solid contaminants is important in conjunction with a wide range of operating temperatures.

Please note!! Price of Shell Tellus S2 VA 46 drops automatically in larger quantities.

Shell Gadinia S3 40 Replacement For: Shell Gadinia 40

Lubricants for medium-speed marine diesel engines running on distillate fuels

Shell Gadinia S3 40 main applications:

• Highly rated, medium speed, main propulsion & auxiliary ·trunk-piston stationary & marine diesel engines.
• Shell Gadinia S3 40 will also perform satisfactorily in smaller high-speed engines typically used in fishing fleets which operate under arduous conditions and have small sump sizes.
• Turbochargers, oil filled stern tubes and variable pitch propellers.
• Deck machinery & other marine applications requiring SAE 40 viscosity oils.

The newly formulated Shell Gadinia S3 40 has also been optimised for use in non-engine applications which are typically found on board such as gearboxes, clutches and stern tubes.

Shell Corena S3 R46 (Previous Name: Corena S2 R46 / Comptella 46)

Premium Screw Compressor Oil

Benefits of the Corena S3 R 46 are:

• + Reliable protection
• + Long service life, efficiency

Shell Corena S3 R 46 is a high-performance compressor oil for the lubrication of rotary vane pumps and screw compressors. With the additive system used, Shell Corena S3 R 46 offers excellent protection and very good performance at oil change intervals up to 4000 hours, under certain conditions even up to 6000 hours

Please note ! Price Shell Corena S3 R 46 drops automatically with larger quantities.

Shell Mysella S5 N 40 Previous Name: Mysella XL

Long Life, Low Ash Stationary Gas Engine Oil

Shell Mysella S5 N 40 main applications:

• Spark-ignited gas engines fuelled by natural gas, especially those creating high oil stress
• May also be used for landfill and biogases
  
  

Shell Mysella S5 N40 is a high performance quality oil blended for use in highly-rated, 4-stroke, spark-ignition engines which require a 'low ash' oil. Shell Mysella S5 N 40 satisfies the new generation of stationary gas engines designed to meet the emerging legislation limiting emissions of NOx, and those which employ the latest 'lean' or 'clean' burn technology. Shell Mysella S5 N 40 is specially developed to provide extended drain intervals in those natural gas engines where oil life is a limiting operational factor.

Please note!! Price of Shell Mysella S5 N 40 drops automatically in larger quantities.

Shell Tellus S3 M 32

Premium Zinc-Free Industrial Hydraulic Fluid

Shell Tellus S3 M 32 main applications:

• Manufacturing and industrial hydraulic systems
• Severe duty hydraulic service
• Marine and mobile hydraulic systems
• Low toxicity towards the environment

Specifications, Approvals & Recommendations

Shell Tellus S3 M 32 fluids are suitable for use with most hydraulic pumps. ·Denison Hydraulics (HF-0, HF-1 and HF-2) Eaton Vickers (Brochure 694) ·Fives Cincinnati P-68 (ISO 32) ·ISO 11158 (HM fluids) ·DIN 51524-2 (HLP oils) ·ASTM 6158 (HM mineral oils) SS 15 54 34 M

Pay attention! Price of Shell Tellus S3 M 32 drops automatically in larger quantities.

Shell Tellus S3 V 46 Previous Name: Tellus STX

Premium Zinc-Free Industrial Hydraulic Fluid for very wide temperature range

Shell Tellus S3 V 46 main applications:

• Mobile/exterior hydraulic applications
• Precision hydraulic systems
• Environmental impact

Shell Tellus S3 V 46 hydraulic fluids are high performance lubricants that use exclusive ashless technology, coupled with highly shear stable viscosity modifiers. Shell Tellus S3 V 46 give excellent viscosity control and protection under severe mechanical, thermal and chemical stresses across a wide temperature range. Shell Tellus S3 V 46 provide outstanding protection and performance in most mobile equipment and other applications subjected to a wide range of ambient or operating temperatures.

Please note!! Price of Shell Tellus S3 V 46 drops automatically in larger quantities.

Shell Rotella DD+ 40

Two-stroke heavy duty Diesel Engine Oil

Shell Rotella DD+ 40 main applications:

• Detroit Diesel two-stroke engines
• Certain 4-cycle engines
   

Shell Rotella DD+ Oil 40 is a high performance, heavy-duty engine oil designed specifically for all two-stroke diesel engines manufactured by Detroit Diesel Corporation.

Pay attention! Price of Shell Rotella DD+ 40 drops automatically in larger quantities.

Shell Corena S3 RX46

Premium Screw Compressor Oil long life oil

Benefits of the Corena S3 RX 46 are:

• + Reliable protection
• + Long service life, efficiency

Shell Corena S3 RX 46 is a premium quality synthesized air compressor oil, based on Shell’s advanced Gas-to- Liquids (GTL) base oil technology combined with an advanced performance additive system. It is designed to provide excellent protection and performance for compressors running with oil change intervals of 6,000 hours and up to 8,000 hours under certain conditions.

Your advantage: Price Shell Corena S3 RX 46 drops automatically with larger quantities.

Aeroshell Oil 80

Mineral lubricating oil for aircraft piston engines

Application Aeroshell Oil 80

AeroShell Oil 65 - AeroShell Oil 80 - AeroShell Oil 100 - AeroShell Oil 120. The suffix for each grade corresponds to the viscosity of the oil at 210°F in Saybolt Universal Seconds. The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations

Shell Naturelle S2 HF 46 previously Naturelle HF-E 46

Fully Synthetic, Biodegradable, Less-flammable Hydraulic Fluid

Shell Naturelle HF-E 46 main applications:

• Mobile / exterior hydraulic applications
• General industrial control equipment and hydraulic systems
• Environmentally sensitive areas
• Industrial operation subject to fire hazards
  

Shell Naturelle Fluid HF-E 46 is an advanced biodegradable and HFDU type less flammable hydraulic fluid for use in hydraulic and power transmission systems. Shell Naturelle Fluid HF-E 46 is readily biodegradable with a low ecotoxicity, particularly suited for use in environmentally sensitive areas and in industrial equipment operating in areas subject to fire hazards, such as in steel mills, surface mines and foundries.

Pay attention! Price of Shell Naturelle HF-E 46 drops automatically in larger quantities.

Shell Corena S4 R 46 (Formerly Shell Corena AS 46)

The top in synthetic screw compressor oil

Benefits of Shell Corena S4 R 46 are:

• + 1.5x longer oil life than Corena S3 R
• + No deposits at high operating temperatures
• + Excellent water-separating power
• + Best anti-wear properties improve the life of the compressor
• + Excellent air separation and minimum foaming

Shell Corena S4 R 46 is a synthetic lubricating oil specially developed for lubrication of oil-injected rotary screw compressors for air with one or two stages.

Note ! Price Shell Corena S4 R 46 drops automatically with larger quantities.