Shell Tellus S2 VA 46

Shell Tellus S2 VA 46 Main Applications

Mobile Equipment

• Earth moving equipment and similar units subjected to the most severe outdoor operating conditions.

HLPD Oil recommendations:

• All hydraulic systems for which an HLPD oil is specified.
• Engine Oil Hydraulic Applications Hydraulic systems which specify the use of engine oils meeting SAE 10W, 20W-20 or 30 viscosity classifications.
• Other applications like Certain industrial gearboxes.

Shell Tellus S2 VA 46 Performance, Features & Benefits:

• + Protection in severe environments
• + Fluid life – Maintenance saving
• + Maintaining system efficiency
  
  

Performance, Features & Benefits of Shell Tellus S2 VA 46

+ Protection in severe environments

The established detergent and zinc based anti-wear technology in Shell Tellus S2 VA fluids provides extra protection in challenging environments by: - Preventing water accumulation - Dispersing solid contaminants - Preventing corrosion in presence of water - Providing low-friction anti-wear performance In addition, the high viscosity index helps ensure protection and performance from low-temperature start-up conditions to high temperature and severe duty operations.

+ Fluid life – Maintenance saving

Shell Tellus VA 46 fluids have good resistance to thermal and chemical breakdown to ensure consistent performance and protection throughout the fluid drain interval.

+ Maintaining system efficiency

Superior cleanliness in severe environments helps keep the hydraulic system functioning efficiently. This is supported by excellent air release and anti-foam characteristics. In addition, Shell Tellus S2 VA provides excellent filterability allowing the use of fine filters for extra protection and long equipment life. Smooth operation of the hydraulic system is supported by the low-friction additive system that helps reduce stick-slip behaviour under high loads or poorly lubricated contacts.
Shell Tellus S2 VA 46 are manufactured with a Quality System assuring the fluid at the Shell plant filling lines meets the requirements of max ISO 4406 21/19/16 class. As recognized by DIN 51524 specification, the oil is exposed to various influences with transport and storage that could effect the cleanliness level.

Specifications, Approvals & Recommendations Shell Tellus S2 VA 46

• DIN 51524-3 (HVLPD fluids)
• ISO 11158 (HV fluids)
• ASTM D6158 (HV fluids)
• Bosch Rexroth RD 90220-01 (2011), ISO 32-68

If you have any questions, please contact OlieOnline Technical Helpdesk

Health, Safety & Environment of Shell Tellus S2 VA 46

Health and Safety

Shell Tellus S2 VA 46 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/

Protect the Environment

Take used Shell Tellus S2 VA 46 to an authorised collection point. Do not discharge into drains, soil or water.
 

Typical Physical Characteristics of Shell Tellus S2 VA 46

Is Shell Tellus S2 TD 46 the same as Shell Tellus S2 VA 46?

Shell Tellus S2 VA 46 is the direct successor of Shell Tellus S2 TD 46. The basic oil has been greatly improved, and Shell Tellus S2 VA 46 is now a Group II basic oil, whereas it was previously a Group I basic oil. This means that the basic oil in Shell Tellus S2 VA 46 is saturated by more than 90%. The advantage is that the service life and thermal load of this oil is higher. It also contains less sulphur, and this gives less chance to adverse ageing components.

Is Shell Tellus S2 VA 46 a DIN 51517 HLP 46 oil?

Yes, in fact, DIN HLVPD 46 is a minimum quality hydraulic oil. Although the requirements of DIN HLVPD 46 are modified over time, it actually says little about the quality differences. Shell Tellus S2 VA 46 scores much better than the results required for a DIN HLVPD 46. Want to know more? Please contact the specialists at OlieOnline.

Where can I buy Shell Tellus S2 VA 46?

OlieOnline is the largest online lubricant webshop, exclusively offering world-famous brands including Shell Tellus S2 VA 46. Customers of OlieOnline appreciate the convenience and time saving that they can buy lubricants online 24/7 at a competitive price. No questions asked: Knowledge is our strength! www.olieonline.co.uk