Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Klüber Klüberlectric BQ 72-72

QTY Size Liter price ex. VAT Price ex. VAT Price Incl. VAT
- + 25 Kg £ 0,00 £ 8873,98 £ 0,00
- + 12x 0.4Kg Cartridges £ 0,00 £ 2186,62 £ 0,00
- + 1 Kg £ 0,00 £ 555,83 £ 0,00
Total
£ 0,00

Klüber Klüberlectric BQ 72-72

Electroconductive low-noise rolling bearing grease for long-term lubrication

Application Klüber Klüberlectric BQ 72-72

Klüberlectric BQ 72-72 is primarily used for the long-term lubrication of capped or sealed ball bearings. Many of them are components of speed-controlled electric motors, generators or fans, or they operate in automobile applications where long service life has to be attained at above-average permanent temperatures and noise must be kept under control.

Product Description

Details

Performance, Features & Benefits of Klüber Klüberlectric BQ 72-72 are:

  • Innovative lubricant containing ionic liquids to provide electroconductivity
  • Excellent behaviour at high and low temperatures
  • Especially for lifetime lubrication of capped or sealed deep groove ball bearings
  • Very good low-noise characteristics

If you have any questions, please contact OlieOnline Technical Helpdesk

Product Description Klüber Klüberlectric BQ 72-72

Do your rolling bearings have to meet challenging performance requirements in the face of long relubrication intervals or even lifetime lubrication? Do they have to operate over a wide service temperature range? Is there a risk of unwanted electric discharge which might lead to electric erosion and the formation of micro-craters? Do you operate rolling bearings in electric components such as generators or electric motors with continuously adjustable speed enabled by frequency converters and expect them to work reliably throughout the component's lifetime with only a minimum of noise? The right lubricant can make a substantial contribution to meeting these taxing requirements. Klüberlectric BQ 72-72 was developed as an electroconductive rolling bearing grease with added excellent low-noise characteristics. Due to the use of selected additives based on ionic liquids, the lubricant's electroconductivity was increased, attaining resistance characteristics resembling those of semiconductors. Another challenge exists in the form of high or low temperatures in combination with long-term or lifetime lubrication. When developing this product, we attached particular importance to the combination of electroconductivity, long-term performance and low-noise operation so as to provide you with a maximised range of applications.
 

Typical Characteristics

Product specifications :   Klüber Klüberlectric BQ 72-72
Article number   094140
Chemical composition, thickener   polyurea
Chemical composition, type of oil   ester oil
Lower service temperature   -45 °C / -49 °F
Upper service temperature   180 °C / 356 °F
Colour space   beige
Texture   homogeneous
Texture   short-fibred
Density at 20 °C   approx. 0.96 g/cm³
Worked penetration,  25 °C, lower limit value  DIN ISO 2137 265 x 0.1 mm
Worked penetration,  25 °C, upper limit value  DIN ISO 2137 295 x 0.1 mm
Kinematic viscosity of the base oil,  40 °C  DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 approx. 72 mm²/s
Kinematic viscosity of the base oil, 100 °C DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 approx. 9.5 mm²/s
Speed factor (n x dm)   1 000 000 mm/min
Flow pressure of lubricating greases,  test temperature:-45 °C DIN 51805 <= 1 400 mbar
Noise test run, SKF BeQuiet+, noise classes   >= GN3
Corrosion inhibiting properties of lubricating greases,  (SKF-EMCOR), test duration:
1 week, distilled water
DIN 51802 <= 1 corrosion degree
Testing of lubricating greases on FAG FE9 rolling bearing tester,  speed: 6000
min-1, axial load: 1500 N, temperature: 180 °C, service life F50:
 DIN 51821 pt. 02 >= 100 h
Specific resistance based on electrode spacing:1 cm; grease quantity: 1 cm³ DIN EN 62631-3-1 <= 1*10⁷ Ohm cm
Water resistance,  3 h/90 °C, rating  DIN 51807 pt. 01 0 - 90
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened
original container, approx.
  36 months

 

Application notes

Klüberlectric BQ 72-72 may be applied by brush, spatula, grease gun or grease cartridge. We recommend testing the pumpability of Klüberlectric BQ 72-72 in automatic lubrication systems prior to use.
 

FAQ

Questions and Answers

Add your question

There are no entries.


Additional Information

Additional Information

Brand Klüber
ACEA DIN ISO OEM No
OEM Approval No