Buy Lubricants — mineral, synthetic, dry & adhesive

CASTROL Aircol SN 68

Synthetic Air Compressor Lubricant

Application CASTROL Aircol SN 68

Castrol Aircol SN compressor lubricants are formulated to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

ISOFLEX TOPAS L 32 N in 1 kilo

Special low-temperature greases

Most important applications of ISOFLEX TOPAS L 32 N are:

• + Designed for extremely low temperatures
• + Long Life grease
• + Contains a UV indicator
   

ISOFLEX TOPAS L 32 N are especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sun roofs, seats, headlamps, fan flaps.

RENISO TRITON SEZ 32

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SEZ 32 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SEZ 32 drops automatically in larger quantities.

CASTROL Spheerol™ BNS 2

High temperature bearing grease

Application CASTROL Spheerol™ BNS 2

Spheerol BNS 2 is suitable for the lubrication of bearings at high temperatures, such as soot blower bearings, in carriages for hardening, drying in tunnel ovens, also in bearings of bitumen mixing plants, cranes in foundries, etc. Spheerol BNS 2 can be used at a temperature range of -20ºC to +150ºC, and for short periods at a temperature range of up to +220ºC. Frequent re-greasing or grease change should be considered subject to application requirements.

Your advantage! Price of CASTROL Spheerol™ BNS 2 drops automatically in larger quantities.

Cassida Fluid GL 150

Food grade Gear oil 150 NSF H1 certified

Cassida Fluid GL 150 main applications:

• Lubrication of enclosed gearboxes used in the food industry.
• Also intended for use in equipment manufacturing food packaging.

Cassida Fluid GL 150 are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. Cassida Fluid GL 150 are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid GL 150 drops automatically in larger quantities.

CASSIDA FLUID GL 220 

Gear lubricants for use in food manufacturing equipment

CASSIDA FLUID GL 220 main applications:

• Lubrication of enclosed gearboxes used in the food industry.
• Also intended for use in equipment manufacturing food packaging.

CASSIDA FLUID GL 220 are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage: Price of CASSIDA FLUID GL 220 drops automatically in larger quantities.

Cassida Fluid GL 320

Gear lubricants for use in food manufacturing equipment

Cassida Fluid GL 320 main applications:

• Lubrication of enclosed gearboxes used in the food industry.
• Also intended for use in equipment manufacturing food packaging.

Cassida Fluid GL 320 are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. Cassida Fluid GL 320 are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid GL 320 drops automatically in larger quantities.

Klüber Klübersynth BHP 72-102 High-temperature lubricant with extraordinary anticorrosion properties for lifetime lubrication Application Klüber Klübersynth BHP 72-102 Klübersynth BHP 72-102 has been designed for the lifetime lubrication of rolling bearings subject to high loads and alternating temperatures ranging from -40 °C to 200 °C. The product is suitable for the lubrication highly loaded rolling bearings in components close to automobile engines, e.g. bearings viscocouplings, belt tensioners, water pumps, fans, servomotors and similar applications. Klübersynth BHP 72-102 forms a stable grease collar that serves as a lubricant reservoir resistant to vibration and at the same time helps to protect the bearings against contaminants.

Cassida Fluid DC 32

Speciality direct contact fluid for food processing applications in the food manufacturing industry

Cassida Fluid DC 32 main applications:

• Absorber oil for edible oil extraction plant solvent recovery systems.
• Forming oil for the manufacture of both two and three piece cans for food and beverages.
• Heat transfer systems in the food industry with a bulk oil temperature range of approximately -30°C to +280°C where the surface temperature of the heating elements (oil film temperature) should not exceed +320°C.

Cassida Fluid DC 32 is a multipurpose fluid designed for a number of special applications in the food manufacturing industry, including absorber oil for edible oil solvent recovery systems, canforming and closed circuit/pressureless heat transfer systems. Cassida Fluid DC 32 has been specially developed to meet the stringent requirements of the food industry. Cassida DC 32 is based on a careful blend of synthetic fluids chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid DC 32 drops automatically in larger quantities.

RENISO PG 68

RENISO PG 68 field of applications:

RENISO PG 68 and GL 68 are ultra-dried, synthetic refrigeration oils based on PAG NH3 systems which operate on the principle of direct expansion. They differ in their miscibility with NH3. Suitable for screw and reciprocating piston compressors. RENISO PG 68 and GL 68 are also recommended for the use with hydrocarbon refrigerants.

Please note!! Price of RENISO PG 68 drops automatically in larger quantities.

RENISO TRITON SE 55

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SE 55 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SE 55 drops automatically in larger quantities.

Klüber Summit PS 150

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 150

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

Klüber POLYLUB GLY 501

Special synthetic lubricating greases for a wide application range

Application Klüber POLYLUB GLY 501

Vehicles Gearshift linkages, moving parts of the heating and ventilation system, shock absorber seals, tie rod elements, seat mechanisms, sun roof guides, pedals. Plain bearings Many types of plain bearing designs. POLYLUB GLY 151, 501, 801 prevent stick-slip to a large extent, particularly in applications where normally a hydrodynamic lubricating film cannot form. Gears Small electric gears with plastic-metal friction components, manual gears operating at very low sliding speeds. Pneumatic installations Pneumatic valves and cylinders with and without piston rod (for these applications, the upper service temperature should not exceed 130 °C). Seals Lubricating and sealing grease for various types of seals. The POLYLUB GLY 151, 501 and 801 lubricants are also suitable for many other plastic components subject to wear caused by relative movement against metal or plastic surfaces. Owing to good damping properties, especially of POLYLUB GLY 801 and 501, noise is considerably reduced.

Klüber Paraliq P 150

Lubricating oils for the food-processing and pharmaceutical industries

Application Klüber Paraliq P 150

For all oil-lubricated friction points in the food-processing and pharmaceutical industries, e.g. gears, bearings, chains, spindles, joints. PARALIQ P 68 is also suitable for deep-drawing of aluminium foils. PARALIQ P 1500 can also be used for the lubrication of lifting, drive and conveyor chains.

CASTROL Optileb GT 100

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 100

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optileb GT 150

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 150

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optileb GT 220

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 220

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optileb GT 320

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 320

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

CASTROL Optileb GT 460

Synthetic NSF H1 gear lubricant

Application CASTROL Optileb GT 460

For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. For the lubrication of spur, angular and worm gear units. For the lubrication of gear motors in stirring machines, turners, packaging machines etc. For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.