Your sector

Shell Turbo Oil T 46

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo T 46 main applications:

• Industrial steam turbines & light duty gas turbines requiring no enhanced anti-wear performance for the gearbox
• Hydroelectric turbine lubrication
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 46 has long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo T 46 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.

Pay attention! Price of Shell Turbo Oil T 46 drops automatically in larger quantities.
Do you need more than 20x 209L ask for our special price

Shell Turbo Oil T 68

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo Oil T 68 main applications:

Shell Turbo Oils T 68 are available in ISO grades 32, 46, 68 & 100 and are suited for application in the following areas:

• Industrial steam turbines & light duty gas turbines which require no enhanced anti-wear performance for the gearbox;
• Hydroelectric turbine lubrication;
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 68 have long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo Oils T 68 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.
Shell Turbo Oils T 68 are formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust & corrosion, low foaming and excellent demulsibility.

Please note!! Price of Shell Turbo Oil T 68 drops automatically in larger quantities.

Shell Morlina S2 BL 10 Previously Morlina 10, Morlina HS 10, Shell Tellus Oil C10

Special lubricating oil for bearing and circulation lubrication

Main uses of Shell Morlina S2 BL 10 are:

• + Machine bearings and circulation lubrication
• + High-rev. slide bearings
  
  

Shell Morlina S2 BL 10 is composed of solvent-refined mineral base oils with low viscosity and zinc-free additives for reliable protection of spindles of high and very high metalworking machines. speeds

Please note ! Price Shell Morlina S2 BL 10 drops automatically with larger quantities.

Shell Morlina S2 BL 5 Previously Morlina 5, Morlina HS 5

Special lubricating oil for bearing and circulation lubrication

Main uses of Shell Morlina S2 BL 5 are:

• + Machine bearings and circulation lubrication
• + High-rev. slide bearings
  
  

Shell Morlina S2 BL 5 is composed of solvent-refined mineral base oils with low viscosity and zinc-free additives for reliable protection of spindles of high and very high metalworking machines. speeds

Please note ! Price Shell Morlina S2 BL 5 drops automatically with larger quantities.

Foodgrade - Fuchs Cassida Fluid Silicone

Properties

Silicone-based, fully synthetic, multi-purpose fluid.

Thermal stability up to 250 °C.

Excellent adhesive properties minimise fling-off in use and wash-off by both cold and hot water.

Readily displaces water.

Formulated for use on metal-to-non-metal or non-metal-to non-metal contact surfaces.

Application 

For lubrication of conveyors; slow rotating machinery;

Small, slow-speed bearings and pivot points found in equipment in the food industry.

FM HEAT TRANSFER FLUID 32

Heat transfer fluid for use in food manufacturing industry

FM HEAT TRANSFER FLUID 32 main applications:

• Heat transfer systems with a bulk oil temperature range of approximately -10 °C to max. +325 °C where the surface temperature of the heating elements (oil fi lm temperature) should not exceed +340 °C.

FM HEAT TRANSFER FLUID is designed for closed circuit and pressureless heat transfer systems. It is based on a careful blend of highly refi ned oils and additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of FM HEAT TRANSFER FLUID 32 drops automatically in larger quantities.

CASSIDA FLUID WG 220

High performance, synthetic gear lubricant for worm gear boxes used in the food & beverage processing equipment

CASSIDA FLUID WG 220 main applications:

• Especially recommended for use in worm gears and applications where excellent thermal stability is required
• Lubrication of enclosed gear boxes used in the food industry
• High load carrying capability, for extreme pressure applications

CASSIDA FLUID WG 220, 320, 460 and 680 are high performance, anti-wear gear oils for the lubrication of worm gears, highly loaded gears and applications where high resistance to micro-pitting is needed, for the use in food and beverage processing equipment. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID WG 220 drops automatically in larger quantities.