Klüber

Klüber Summit SH 46

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 46

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Klüber LAMORA D 68

Lubricating oils for slideways and guideways

Application Klüber LAMORA D 68

LAMORA D oils are especially suited for the lubrication of heavily loaded slideways with low feed rates. LAMORA D oils have been tried and tested for the lubrication of slideways and guideways in modern machining centres, milling machines, lathes and other machine tools. As they show good compatibility with water-miscible machining fluids and cooling lubricants, LAMORA D oils can be used in applications where they may mix with aqueous media.

Klüber BARRIERTA L 55/2

High-temperature long-term greases

Application Klüber BARRIERTA L 55/2

Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include:

• conveyors (load and turn rollers)
• kiln cart wheel bearings
• calender bearings
• fan bearings
• chain bearings in film stretching stenters

Klüber ISOFLEX TOPAS NB 5051

Synthetic long-term grease

Application Klüber ISOFLEX TOPAS NB 5051

ISOFLEX TOPAS NB 5051 is used for plain and rolling bearings (e.g. in automotive engineering) and for gas meters. It is also used in small gears, where it reduces the noise produced by the gear wheels. ISOFLEX TOPAS NB 5051 is also suitable for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical actuators for valves). Its good adhesion on smooth surfaces makes it ideal for the running-in lubrication (assembly) of plastic and composite bearings.

Klüber Klübertec ST 4-702

Stamping and forming fluid with residue-free evaporation

Application Klüber Klübertec ST 4-702

• Stamping and forming of metal sheets of all types, e.g. for electric motors and components; sheet thickness up to 2.5 mm
• Easy to medium forming processes, especially if there are no additional cleaning steps
• Stamping and fine blanking of metals, such as aluminium and aluminium alloys; non-ferrous metals; steels
• Drawing, rolling, edging and folding of e.g. drums and drum lids

Klüber VARILUB NBU 15/300

Spindle bearing grease

Application Klüber VARILUB NBU 15/300

VARILUB NBU 15/300 has been especially developed for highspeed rolling and plain bearings, e.g. tool and textile spindle bearings, threaded spindles, ball screws subject to high loads, chassis bearings. It can also be used as long-term grease for bearings in cableways and precision engineering, or for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical actuators for valves).

Klüber Tyreno WA-70V

for low and fine vacuum applications (mech. backing pumps)

Application Klüber Tyreno Fluid WA-70V

General-purpose working fluid for oil-sealed vacuum pumps extracting air, noble gases, but not oxygen. The product is very suitable for thin-layer processes, such as CVD/PVD etc. The final pump pressure of approx. 10–3 mbar measured in double-stage mechanical pumps.

Klüber Klübersynth GHE 6-100

Synthetic gear and circulating oils

Application Klüber Klübersynth GHE 6-100

Klübersynth GHE 6 oils were specially developed for the lubrication of spur, bevel, planetary and worm gears. Klübersynth GHE 6 oils are also used for the lubrication of rolling and plain bearings as well as all kinds of toothed couplings.

Klüber Unisilkon L 250 L

Special lubricating grease for drinking water, beverage and heating valves and fittings

Application Klüber Unisilkon L 250 L

UNISILKON L 250 L is used as lubricating and sealing grease for – domestic valves & fittings for drinking water, (e.g. ceramic discs and piston cartouches, thermo regulators). As the lubricant’s viscosity is rather independent of service temperatures, UNISILKON L 250 L allows constant actuating forces within the whole cold/hot water range of e.g. single-lever mixer taps. – valves and fittings of heating installations (e.g. thermoregulators, tap cocks, pressfit seals) UNISILKON L 250 L has also proven effective as assembly aid for radial shaft seals and packings in contact with cold or hot water and steam.

Klüber STABURAGS NBU 4

Lubricating greases with excellent wear resistance

Application Klüber STABURAGS NBU 4

STABURAGS NBU 4 has been used successfully on highspeed rolling bearings exposed to humidity or ambient media. It is suitable for rolls, spindles, cam rollers, tensioning rollers and motors. STABURAGS NBU 12 is efficient on medium-speed rolling bearings subject to humidity or ambient media. It is used on water pumps, wheel bearings and motors; and in the textile industry, on all wet processing equipment such as washing, mercerising and dyeing machines.

Klüber STABURAGS NBU 30

Lubricating grease with high resistance to ambient media

Application Klüber STABURAGS NBU 30

STABURAGS NBU 30 has been especially designed for use as sealing grease, for valves and fittings as well as for the lubrication of low-speed rolling and plain bearings subject to humidity, water vapour and aggressive media. Typical applications include bearings in conveyors (load rollers in wet areas), in textile machines for wet processing (festoon steamers, washing machines), and bearings of machines in the food-processing industry. STABURAGS NBU 30 is NSF H2 registered.

Klüber Klübersynth GE 46-1200

Synthetic long-term fluid grease with excellent anticorrosive effect

Application Klüber Klübersynth GE 46-1200

We developed Klübersynth GE 46-1200 on the basis of our long experience in the lubrication of spur, bevel and worm gears. Especially for steel/steel combinations, for example in small and miniature gears, gear motors and power tool gears, Klübersynth GE 46-1200 offers outstanding performance characteristics. Medium peripheral speeds of 4-5 m/s can be effectively handled by this grease. It also provides vibration and noise damping. Klübersynth GE 46-1200 can also be used to optimise the lubrication of ball and roller guides, plain and rolling bearings, and toothed couplings from – 30 to 120 °C. It may even be applied at extreme temperatures down to -50 °C since Klübersynth GE 46-1200 will build up a load-carrying lubricant film at these low temperature conditions.

Klüber Klüberoil GEM 1-100 N

High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology

Application Klüber Klüberoil GEM 1-100 N

Klüberoil GEM 1 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

Klübersynth GH 6-32

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-32

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Klüber UNISILKON L 50/2

High-temperature grease for a wide service temperature range

Application Klüber UNISILKON L 50/2

UNISILKON L 50/2 is a long-term lubricating grease for rolling bearings subject to high thermal stress. It has proven effective in applications in the wood, textile and paper industries. UNISILKON L 50/2 can also be used for plain bearings in metal/ plastic material combinations and as assembly aid for rubber parts like seals. UNISILKON L 50/2 is resistant to hot and cold water and water vapour. It is not resistant to most organic solvents, strong acids and alkaline solutions.

Klübersynth GH 6-100

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-100

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Klübersynth GH 6-1000

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-1000

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Klübersynth GH 6-150

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-150

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Klübersynth GH 6-320

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-320

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains