Shell

Tellus S2 M68 hydraulic oil (formerly Tellus 68) has been renewed and is now called Shell Tellus S2 MX68!

Hydraulic oil exceeding the DIN HLP 68!

Shell Tellus S2 MX 68 Hydraulic Oils recommended by all leading hydraulic component builders.

Many OEMs recommend Tellus S2 MX68 hydraulic oil for hydraulic systems that are used with low and high operating pressures, high temperatures and varying loads.

Examples of application of the S2 MX68 are:

• + Hydraulic presses
• + Hydraulically controlled tools in the industry
• + High-speed hydraulic systems
   

Note ! Shell Tellus S2 MX 68 price automatically drops in larger quantities.

Shell Tellus S2 V68 (Formerly Shell Tellus T68) has been improved and is now called Shell Tellus S2 VX68 !

Hydraulic oil ISO VG68 with a wide temperature range

Examples of application of Shell Tellus S2 VX 68 are:

• + Hydraulic excavators and other earthmoving equipment
• + Port cranes and lifting equipment such as forklifts
• + Hydraulic driven equipment on board ships
• + Any mobile exterior hydraulic system

Shell Tellus S2 VX 68 fluids are high-performance hydraulic fluids based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures. Shell Tellus S2 VX 68 resist breakdown under heat or mechanical stress and are ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.

Pay attention! Shell Tellus S2 VX68 Price falls automatically for larger quantities.

Shell Tellus S3 M 68

Premium Zinc-Free Industrial Hydraulic Fluid

Shell Tellus S3 M 68 main applications:

• Manufacturing and industrial hydraulic systems
• Severe duty hydraulic service
• Marine and mobile hydraulic systems
• Low toxicity towards the environment

Specifications, Approvals & Recommendations

Shell Tellus S3 M 68 fluids are suitable for use with most hydraulic pumps. ·Denison Hydraulics (HF-0, HF-1 and HF-2) Eaton Vickers (Brochure 694) ·Fives Cincinnati P-68 (ISO 68) ·ISO 11158 (HM fluids) ·DIN 51524-2 (HLP oils) ·ASTM 6158 (HM mineral oils) SS 15 54 34 M

Pay attention! Price of Shell Tellus S3 M 68 drops automatically in larger quantities.

Shell Turbo Oil T 68

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo Oil T 68 main applications:

Shell Turbo Oils T 68 are available in ISO grades 32, 46, 68 & 100 and are suited for application in the following areas:

• Industrial steam turbines & light duty gas turbines which require no enhanced anti-wear performance for the gearbox;
• Hydroelectric turbine lubrication;
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 68 have long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo Oils T 68 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.
Shell Turbo Oils T 68 are formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust & corrosion, low foaming and excellent demulsibility.

Please note!! Price of Shell Turbo Oil T 68 drops automatically in larger quantities.

Shell Tonna S3 M 68 Previous Name: Shell Tonna S 68

Premium machine tool slideway oils

Shell Tonna S3 M 68 main applications:

• Machine tool slideways, tables and feed mechanisms
• Machine tool hydraulic systems
• Machine tool gearboxes and spindles
• They are especially recommended in cases where high precision and low-speed machines are used as well as in combined lubrication systems.
   

Shell Tonna S3 M 68 oils are specially designed for the lubrication of machine tool slides, tables and feed mechanisms. Their enhanced tackiness and stick-slip characteristics are combined to offer superior frictional performance on slideways.

Pay attention! Price of Shell Tonna S3 M 68 drops automatically in larger quantities.

Shell Omala S2 GX 68 

Industrial Gear Oils

Shell Omala S2 GX 68 main applications:

• Enclosed industrial gear systems
  Shell Omala S2 GX technology provides an effective extreme pressure (EP) formulation designed specifically for enclosed industrial gearboxes using steel-on-steel, spur, helical, or planetary gear drives, including highly loaded systems with splash or forced circulation systems. Shell Omala S2 GX oils are also suitable for the lubrication of non-geared applications, that include bearings and other steel-on-steel components with splash or forced circulation systems.
• Other applications
  Shell offers a wide range of products for other gear applications that have their own specific requirements.

For geared systems, or other applications that employ a filtration unit finer than 5 microns, please consult your Shell Local Technical Advisor and Product Application Specialist before using Shell Omala S2 GX 68.

Shell Omala S2 GX 68 oils are high quality extreme-pressure (EP) oils designed primarily for the lubrication of heavy duty industrial gearboxes. Their high load carrying capacity, protection against micropitting and compatibility with seals and paints, combine to offer excellent performance in enclosed gear applications.

Please note!! Price of Shell Omala S2 GX 68 drops automatically in larger quantities.

Shell Tellus S3 V 68 Previous Name: Tellus STX

Premium Zinc-Free Industrial Hydraulic Fluid for very wide temperature range

Shell Tellus S3 V 68 main applications:

• Mobile/exterior hydraulic applications
• Precision hydraulic systems
• Environmental impact

Shell Tellus S3 V 68 hydraulic fluids are high performance lubricants that use exclusive ashless technology, coupled with highly shear stable viscosity modifiers. 
Shell Tellus S3 V68 give excellent viscosity control and protection under severe mechanical, thermal and chemical stresses across a wide range of temperatures. 
Shell Tellus S3 V 68 provide outstanding protection and performance in most mobile equipment and other applications subjected to a wide range of ambient or operating temperatures.

Please note!! Price of Shell Tellus S3 V 68 drops automatically in larger quantities.

Shell Corena S2 P 68 Previously Corena P68

Oil for compressed air piston compressors

Main uses of Shell Corena S2 P 68 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S2 P 68 is a premium oil for the lubrication of high pressure piston compressors. It is particularly suitable for the lubrication of compressed air piston compressors, in which discharge temperatures up to 220C are achieved.
 

Please note ! Price Shell Corena S2 P 68 drops automatically with larger quantities.

Shell Corena S3 RX68

Premium Screw Compressor Oil long oil life

Benefits of the Corena S3 RX 68 are:

• + Reliable protection
• + Long service life, efficiency

Shell Corena S3 RX 68 is a premium quality synthesized air compressor oil, based on Shell’s advanced Gas-to- Liquids (GTL) base oil technology combined with an advanced performance additive system. It is designed to provide excellent protection and performance for compressors running with oil change intervals of 6,000 hours and up to 8,000 hours under certain conditions.

Your advantage: Price Shell Corena S3 RX 68 drops automatically with larger quantities.

Shell Corena S3 R 68 vorher Comptella S 68

Premium Rotary Air Compressor Oil

Application Shell Corena S3 R 68

Rotary sliding vane and screw air compressors. Shell Corena S3 R is suitable for use in oil-flooded/ oil injected single or two-stage rotary vane or screw air compressors.

Shell Corena S4 R 68 (Formerly Shell Corena AS 68)

The top in synthetic screw compressor oil

Benefits of Shell Corena S4 R 68 are:

• + 1.5x longer oil life than Corena S3 R
• + No deposits at high operating temperatures
• + Excellent water-separating power
• + Best anti-wear properties improve the life of the compressor
• + Excellent air separation and minimum foaming

Shell Corena S4 R 68 is a synthetic lubricating oil specially developed for lubrication of oil-injected rotary screw compressors for air with one or two stages.

Note ! Price Shell Corena S4 R 68 drops automatically with larger quantities.

Shell Corena S4 P68 compressor oil (Formerly Shell Corena AP 68)

High-quality synthetic lubricating oil for compressed air piston compressors

Main uses of Shell Corena S4 P68 are:

• + Compressed air reciprocating compressors
• + Compressor for breathing air
  

Shell Corena S4 P 68 is a high-quality synthetic oil composed of synthetic esters and unique high-quality additives. It has been developed for excellent lubrication of compressed air suction compressors, in which discharge temperatures may exceed 220C.

Please note ! Price Shell Corena S4 P 68 drops automatically with larger quantities.

Shell Refrigeration Oil S4 FR-F 68 Previous Name: Clavus Oil R

Advanced Synthetic Refrigerator Compressor Lubricant

Shell Refrigeration Oil S4 FR-F 68 main applications:

• Refrigerator Compressors Shell Refrigeration Oil S4 FR-F 68 is recommended for use in open, semi-open and hermetic compressors in domestic, commercial and industrial refrigeration systems. It can be used in both rotary and reciprocating compressor types.
• Refrigerant Compatibility Shell Refrigeration Oil S4 FR-F 68  is recommended for use with R134a and other types of HFC refrigerant.
• Seal Compability Shell Refrigeration Oil S4 FR-F 68 is compatible with all sealing materials commonly used with HFC refrigerant systems

Shell Refrigeration Oil S4 FR-F 68 is a synthetic refrigeration lubricant with a polyol ester base fluid. It has been developed for use with R134a and other HFC refrigerants.

Please note!! Price of Shell Refrigeration Oil S4 FR-F 68 drops automatically in larger quantities.

PANOLIN HLP SYNTH 68

Hydraulic Fluid, Light Biodegradable - Based on Saturated Synthetic Esters

Benefits of Panolin HLP Synth 68:

• Fully synthetic high-performance hydraulic fluid, zinc-free, and environmentally friendly, based on synthetic esters with special additives
• Prevents hardening and deposits, even at high temperatures
• Extremely long oil change intervals, "lifetime filling"
• Reduces CO2 emissions
• Clearly higher reserves than conventional hydraulic oils
• Excellent high-pressure properties
• Excellent performance in cold conditions (very low pour point)
• Oxidation-resistant at high temperatures

Shell Morlina S2 B 68 Previously Morlina 68

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 68 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 68 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 68 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 68 drops automatically with larger quantities.

Shell Tellus S4 VE 68

Advanced Synthetic Gas To Liquid (GTL) Zinc Based Hydraulic Oil

Application Shell Tellus S4 VE 68

Mobile Hydraulic systems. Shell Tellus S4 VE, with its broad operating window, long oil drain intervals, superior system operation characteristics and many OEM approvals, is designed to be particularly suitable for mobile hydraulic systems such as construction and mining machinery

Industrial hydraulic systems. Shell Tellus S4 VE, with its energy efficiency benefits and long oil life, is designed to be particularly suitable for stationary industrial hydraulic systems with a high intensity of hydraulic power usage such as injection molding and high pressure metal pressing operations

Wind Turbines. Wind turbine systems are exposed to harsh conditions such as extreme cold climate and humid regions including offshore locations. Shell Tellus S4 VE with its high performance additives in GTL base oil enables long service life and its high viscosity index delivers responsive performance even in cold start conditions

Marine Hydraulic Systems. Shell Tellus S4 VE is recommended for marine applications where ISO HV category hydraulic fluids are recommended

Shell Gas Compressor Oil S4 RN 68

Advanced Synthetic Gas Compressor Oil

Application Shell Gas Compressor Oil S4 RN 68

Rotary screw gas compressors. Shell Gas Compressor Oil S4 RN is suitable for shaft and rotor lubrication of rotary screw compressors used for low pressure compression of natural gas.

LPG bottling. Shell Gas Compressor Oil S4 RN is suitable for use in rotary screw compressors used for bottling LPG up to 40 bar pressure

LPG and LNG vehicle fuelling. Suitable for use in compressors handling natural and petroleum gas for vehicle fueling applications

Multiple gas transportation vessels. Shell Gas Compressor Oil S4 RN is suitable for compressing a wide variety of hydrocarbon gases. When used in marine cargo compressors, there is no need to change lubricant with a change in gas being transported

Shell Gas Compressor Oil S4 RN 68 previously Shell Madrela GP

Advanced Synthetic Gas Compressor Oil

Application Shell Gas Compressor Oil S4 RN 68

Rotary screw gas compressors. Shell Gas Compressor Oil S4 RN is suitable for shaft and rotor lubrication of rotary screw compressors used for low pressure compression of natural gas.

LPG bottling. Shell Gas Compressor Oil S4 RN is suitable for use in rotary screw compressors used for bottling LPG up to 40 bar pressure

LPG and LNG vehicle fuelling. Suitable for use in compressors handling natural and petroleum gas for vehicle fueling applications

Multiple gas transportation vessels. Shell Gas Compressor Oil S4 RN is suitable for compressing a wide variety of hydrocarbon gases. When used in marine cargo compressors, there is no need to change lubricant with a change in gas being transported

Shell Omala S4 GXV 68 previously S4 GX 68

Advanced Synthetic Industrial Gear Oil

Shell Omala S4 GXV 68 main applications:

• Manufacturing and industrial gear systems
• Gear motor systems and other inaccessible installations
• Excellent compatibility with seals, paints and sealants
• Enclosed industrial gear systems

Shell Omala S4 GXV 68 is an advanced synthetic heavy duty industrial gear oil, approved by Siemens AG, offering outstanding lubrication performance under severe operating conditions, including reduced friction, long service life, high resistance to micro-pitting for optimal gear protection and superb compatibility with seals.

Pay attention! Price of Shell Omala S4 GXV 68 drops automatically in larger quantities.