Buy Lubricants — mineral, synthetic, dry & adhesive

Medium term rust preventive oil

Ensis RPO 1200 is a solvent free, oil-based temporary corrosion preventative for metal surfaces likely to corrode in storage or use Ensis RPO 1200 leaves a thin, self-healing, oily, protective film on surfaces requiring temporary protection. It is ideal for use on finished parts, subjected to indoor storage of up to twelve months.

Important properties of Houghton Ensis RPO 1200 (previous name Shell Ensis RPO 1200) are:

• + Indoor protection for 12 months
• + Outdoor covered protection for 3 months
• + No cleaning needed before parts assembling
• + Low volatility
• + High flashpoint

Houghton Garia 404 M-10

Properties

Garia 404 M-10 is a neat cutting oil for machining high alloyed steels, aluminum and magnesium alloys. Garia 404 M-10 is chlorine free, free of heavy metals and it has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and anti-wear additives which gives the oil high load carrying properties. Due to its active sulphur content, the oil may discolor yellow metals.

Applications

Garia 404 M-10 is recommended for:

Grinding

Deep-hole drilling

Taping or broaching of low to medium alloyed steels

Gear hobbing

Machining on automatic lathes

Garia 404 M-10 is used neat as supplied.

Klüber BARRIERTA L 55/1

High-temperature long-term greases

Application Klüber BARRIERTA L 55/1

Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include: – conveyors (load and turn rollers) – kiln cart wheel bearings – calender bearings – fan bearings – chain bearings in film stretching stenters BARRIERTA L 55/2 is most frequently used for initial and longterm lubrication. For relubrication softer grades of NLGI class 1 or lower are recommended. Friction points under the influence of media BARRIERTA L 55 greases offer exceptionally long service lifetimes even when exposed to any of a large number of aggressive media such as concentrated acids, lyes, organic solvents or gases. In addition to their resistance to media, BARRIERTA L 55/2 and BARRIERTA L 55/3 offer also good adhesion and a sealing effect, which makes them suitable for application in – valves, fittings and installations e.g. in the chemical industry – pneumatic components – level gauges, e.g. for fuels or chemicals – seals (static, dynamic) – extraction systems Food-processing and pharmaceutical industries All BARRIERTA L 55 greases are registered as NSF-H1 and are therefore in compliance with FDA 21 CFR § 178.3570. The additional certification according to ISO 21469 supports the compliance with the hygienic requirements in your production plant. White-coloured BARRIERTA L 55 special lubricants can therefore also be used on friction points where incidental contact with food products cannot be ruled out for technical reasons, e.g. in rolling and plain bearings and guides operating under high thermal loads in – automatic baking ovens – cooking or frying lines – conveyor systems Plastic-plastic friction points BARRIERTA L 55 greases – irrespective of NLGI grade - are neutral towards the majority of plastic materials. Results of pertinent tests with fluoroelastomers can be found overleaf. We recommend testing lubricant compatibility with the materials in question prior to series application.

Q8 El Greco 150

Applications Q8 El Greco 150

Industrial gear drives

Windturbine gears.

Your advantage! Price of Q8 El Greco 150 drops automatically in larger quantities.

Q8 El Greco 320

Applications Q8 El Greco 320

Industrial gear drives

Windturbine gears.

Your advantage! Price of Q8 El Greco 320 drops automatically in larger quantities.

TOTAL MULTIS COMPLEX HV2 Moly

Extreme-pressure and high-temperature complex lithium soap grease.

Applications TOTAL MULTIS COMPLEX HV2 Moly

• MULTIS COMPLEX HV2 Moly is adapted to the lubrication of all applications operating under severe conditions, more particularly under high load and high-temperature constraints for which a conventional lithium soap grease is no longer sufficient.
• MULTIS COMPLEX HV2 Moly is a multipurpose grease, specially formulated for the lubrication of ball bearings, plain bearings, roller bearings, subjected to high loads and for lubrication of any application subjected to impacts and vibrations in transportation, agriculture and off-road vehicles
• MULTIS COMPLEX HV2 Moly is also well-suited to any industrial application in which an NLGI 2 grade high-temperature and extreme-pressure grease is required.

Your advantage! Price of TOTAL MULTIS COMPLEX HV2 Moly drops automatically in larger quantities.

TOTAL BIOHYDRAN TMP 100

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 100

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 100 drops automatically in larger quantities.

Shell Vacuum Pump Oil S3 RX 100

Oil for Rotary Vacuum Pump

Application Shell Vacuum Pump Oil S3 RX 100

Rotary Vacuum Pumps. Shell Vacuum Pump Oil S3 RX 100 is designed for the lubrication of rotary and vane vacuum pumps and can be used to provide low vacuum pressure. It is suitable for the lubrication of most laboratory and industrial vacuum pumps. Standard Operating Environments. Shell Vacuum Pump Oil S3 RX 100 is suitable for applications where ambient temperatures exceed 0°C and maximum operating temperatures do not exceed 100°C. The vacuum range generally tends to decrease as the operating temperature of the pump increases. Shell Vacuum Pump Oil S3 RX 100 is suitable for vacuum pumps operating between atmospheric pressures of 1 mbar - 10-3 mbar. Shell Vacuum Pump Oil S3 RX 100 is not recommended for use when corrosive gases or chemical vapors are involved in the extraction process.

Shell Spirax S6 ATF ZM Previous Name: Donax TZ

Premium Heavy Duty Transmission Oil for ZF Long Drain

Shell Spirax S6 ATF ZM main applications:

• Heavy duty automatic transmissions                                  Shell Spirax S6 ATF ZM can also be used in all ZF-Ecomat - and ZF-Ecolife transmissions, and where retarders are used.

Shell Spirax S6 ATF ZM Oil is a fully synthetic, premium quality, heavy-duty automatic transmission oil specifically designed in partnership with ZF as a lubricant for the newest generation of ZF-Ecomat - and ZFEcolife transmissions. Spirax S6 ATF ZM is the ultimate performance automatic transmission fluid allowing extended drain intervals even under the most severe conditions.

Please note!! Price of Shell Spirax S6 ATF ZM drops automatically in larger quantities.

Klübersynth GH 6-46

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-46

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Shell Fire-Resistant Hydraulic Fluid S3 DU 46

Fire Resistant (HFDU) and Readily Biodegradable Hydraulic Fluid

Application Shell Fire-Resistant Hydraulic Fluid S3 DU 46

Hydraulic fluid. Shell Fire-Resistant Hydraulic Fluid S3 DU 46 can be used as the hydraulic fluid in industrial and mobile equipment, including high-pressure systems, hydrostatic drives, systems with servo valves, and robotics.

Houghton Garia 602.02 M-15

Properties

Houghton’s Garia™ series line of neat cutting oils contain active chemistry for medium to severe cutting of aluminum, cast iron, steel and stainless steel. Additives ensure long sump life and resistance to dilution with tramp oils.

The oils show excellent results by working with many difficult operations like broaching, deep-hole drilling, tapping, shaping or shaving of gears. 

Using Houghton 602.02 Garia M-15 specifically in deep drilling operations allows higher cutting speeds and greater lubrication providing  very high efficiency combined with minimum wear of cutting heads and drill guides.

Chlorine Free
Low aromatics 
Low oil mist and evaporation 
Good wetting properties
Free of heavy metals

Houghton Garia 602.02 M-15 is a cutting oil that can be used for machining of a wide variety of materials, such as cast iron, copper alloys, aluminum alloys, steel alloys, stainless steel, acid-and heat-resistant steels.

Houghton 602.02 Garia M-15 was designed for difficult machining operations such as deep drilling, drilling, reaming, threading, grinding, broaching and gear cutting on the above mentioned materials. Using Houghton 602.02 Garia M-15 specifically in deep drilling operations allows higher cutting speeds and greater lubricity thereby providing  high efficiency combined with minimum wear of cutting heads and drill guides.

Houghton Garia 601 M-12

Properties

GARIA 601 M-12 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces

Garia 601 M-12 and M-22 are neat cutting oils for machining of high alloy steels (stainless,heat resistant, austenitic, etc.) and aluminium ormagnesium alloys.

The oils show excellent results in working with many difficult operations like broaching, deep-hole drilling, tapping, shaping,and shaving of gears.

• Garia 601 M-12 and M-22 products are also very good grinding oils.
• Garia 601 M-12 and M-22 contain active sulphur - there is a risk of staining of yellow metals.
• Garia 601 M-12 and M22 are free of chlorine and heavy metals.

Approved by Kay's Engineering (Eldorado machines) for gun drilling.

Plantoflux 46 AT-S

Synthetic fire-resistant hydraulic fluids based on organic esters, type HFDU

Plantoflux 46 AT-S field of applications:

PLANTOFLUX-AT-S are primarily used as fire resis-tant hydraulic fluids in machines or plants operating in hazardous conditions, i.e. where naked flames or high temperatures arepresent and the fire riskcaused by the fluid leakage is high, most notably: steel mills, blast furnaces, continuous casting ma-chine, coke plants, etc.PLANTOFLUX-AT-S are generally applicable in any hydraulic systems where environmental protection and biodegradability are a priority.

Please note!! Price of Plantoflux 46 AT-S drops automatically in larger quantities.

Shell Gadus S3 T460 1.5 Previous Name: Stamina Grease 0511

Premium Performance High-Temperature Extreme Pressure Grease

Shell Gadus S3 T460 1.5 main applications:

• Shell Gadus S3 T460 Grease was formulated specifically for the lubrication of high temperature, slow-moving concast bearings in the steel industry. 
• It can also be used in other high temperature, slow-moving bearing, applications. 
• Field experiences have demonstrated the benefits of Gadus S3 T460 Grease, achieving lower maintenance costs ie less bearing replacement and less maintenance of centralized lubrication systems.

Shell Gadus S3 V460 Greases are especially suitable for slow moving, heavy-duty bearings operating at high temperature and under severe load. eg Steel (continuous casters, workroll bearings), Cement, Paper, Chemical Industry, Mining.

Please note!! Price of Shell Gadus S3 T460 1.5 drops automatically in larger quantities.

Shell Gas Compressor Oil S4 RN 68 previously Shell Madrela GP

Advanced Synthetic Gas Compressor Oil

Application Shell Gas Compressor Oil S4 RN 68

Rotary screw gas compressors. Shell Gas Compressor Oil S4 RN is suitable for shaft and rotor lubrication of rotary screw compressors used for low pressure compression of natural gas.

LPG bottling. Shell Gas Compressor Oil S4 RN is suitable for use in rotary screw compressors used for bottling LPG up to 40 bar pressure

LPG and LNG vehicle fuelling. Suitable for use in compressors handling natural and petroleum gas for vehicle fueling applications

Multiple gas transportation vessels. Shell Gas Compressor Oil S4 RN is suitable for compressing a wide variety of hydrocarbon gases. When used in marine cargo compressors, there is no need to change lubricant with a change in gas being transported

TOTAL CARTER EP 460 previous Carter SY 460

Mineral oils for enclosed gears.

Applications TOTAL CARTER EP 460

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:

• bevel and spur gears
• bearings and gear couplings
• worm gears.

Your advantage! Price of TOTAL CARTER EP 460 drops automatically in larger quantities.

Shell Omala S4 GXV 460 previously S4 GX 460

Advanced Synthetic Industrial Gear Oil

Shell Omala S4 GXV 460 main applications:

• Manufacturing and industrial gear systems
• Gear motor systems and other inaccessible installations
• Excellent compatibility with seals, paints and sealants
• Enclosed industrial gear systems

Shell Omala S4 GXV 460 is an advanced synthetic heavy duty industrial gear oil, approved by Siemens AG, offering outstanding lubrication performance under severe operating conditions, including reduced friction, long service life, high resistance to micro-pitting for optimal gear protection and superb compatibility with seals.

Pay attention! Price of Shell Omala S4 GXV 460 drops automatically in larger quantities.

Klüber Tyreno Fluid 3/6V

High-performance vacuum pump oils for fine- and high-vacuum applications

Application Klüber Tyreno Fluid 3/6V

Klüber Tyreno Fluids are tried-and-tested as filling fluids in mechanical backing pumps, diffusion pumps and turbomolecular pumps by leading OEMs. They are also suitable for pumping gasous oxygen. Klüber Tyreno Fluids have been tested as filling fluids according to the Autogeneous Ignition Temperature (AIT) procedure. Klüber Tyreno Fluids can also be used as vapour-resistant, chemically inert transmission fluid in dry-running screw-type pumps. Klüber Tyreno Fluids can also be used as sliding agent for the lubrication of valves, fittings and installations carrying gaseous oxygen or for chemical plants and apparatus requiring good resistance to various gases (conclusion by analogy based on chemical composition. For this purpose, we recommend users conduct their tests using the complete component under conditions similar to series application. Test results show the products' usability for an O2 content > 21 % by vol. under operating conditions specified in the product data section of this product information leaflet. Behaviour towards metal, elastomers and plastics Klüber Tyreno Fluid 3/6V, 6/14V, 12/25V are normally neutral towards metallic materials, plastics and elastomers within the envisaged temperature range. Nevertheless, we recommend checking the compatibility of the product with materials prior to the introduction of this product.

CASTROL CareCut ES 3

High performance neat cutting oil

Application CASTROL CareCut ES 3

CareCut ES 3 is designed for severe honing and superfinishing of ferrous and non ferrous materials. It can also be used for grinding applications, drilling and general machining of aluminium, yellow metals, cast iron and medium alloyed steel. CareCut ES 3 can also be used for hard metal as well as tool grinding. CareCut ES 3 does not contain active sulphur and is hence compatible with yellow metals