Lubricants

Mobil Delvac XHP Ultra LE 5W30 New name Mobil Delvac Modern 5W-30 Advanced Protection V6

Advanced Engine and Emission System Protection

Application Mobil Delvac XHP Ultra LE 5W30

Recommended by ExxonMobil for use in: Latest generation MB trucks and buses requiring MB-Approval 228.51 lubricants. In commercial vehicle and bus engines (only when operating in regions where ultra-low sulfur fuel is used) without particulate filters for which conventional SAPS oil per MB-Approval 228.5 are recommended (please always refer to MB-Sheet 223.2 and to the owner's manual of the respective vehicle). Latest generation of MAN trucks and buses requiring MAN M 3677 approved lubricants. In commercial vehicle and bus engines (only when operating in regions where ultra-low sulfur fuel is used) without particulate filters for which conventional SAPS oil per MAN M 3277 & M 3275-1 are recommended (please always refer to the owner's manual of the respective vehicle). On-highway light and heavy-duty trucking. Modern heavy-duty engines equipped with Diesel Particulate Filter (DPF) in line with owner manual recommendations

Klüber BARRIERTA L 55/1

High-temperature long-term greases

Application Klüber BARRIERTA L 55/1

Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include: – conveyors (load and turn rollers) – kiln cart wheel bearings – calender bearings – fan bearings – chain bearings in film stretching stenters BARRIERTA L 55/2 is most frequently used for initial and longterm lubrication. For relubrication softer grades of NLGI class 1 or lower are recommended. Friction points under the influence of media BARRIERTA L 55 greases offer exceptionally long service lifetimes even when exposed to any of a large number of aggressive media such as concentrated acids, lyes, organic solvents or gases. In addition to their resistance to media, BARRIERTA L 55/2 and BARRIERTA L 55/3 offer also good adhesion and a sealing effect, which makes them suitable for application in – valves, fittings and installations e.g. in the chemical industry – pneumatic components – level gauges, e.g. for fuels or chemicals – seals (static, dynamic) – extraction systems Food-processing and pharmaceutical industries All BARRIERTA L 55 greases are registered as NSF-H1 and are therefore in compliance with FDA 21 CFR § 178.3570. The additional certification according to ISO 21469 supports the compliance with the hygienic requirements in your production plant. White-coloured BARRIERTA L 55 special lubricants can therefore also be used on friction points where incidental contact with food products cannot be ruled out for technical reasons, e.g. in rolling and plain bearings and guides operating under high thermal loads in – automatic baking ovens – cooking or frying lines – conveyor systems Plastic-plastic friction points BARRIERTA L 55 greases – irrespective of NLGI grade - are neutral towards the majority of plastic materials. Results of pertinent tests with fluoroelastomers can be found overleaf. We recommend testing lubricant compatibility with the materials in question prior to series application.

TOTAL BIOHYDRAN TMP 100

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 100

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 100 drops automatically in larger quantities.

Mobil DTE PM Excel 150

Paper Machine Lubricant

Application Mobil DTE PM Excel 150

Lubrication of the wet end, press section, calender applications and dry end, including in Voith and Metso (Valmet) paper machines. Application involving circulation systems operating over a wide temperature range. Systems that must be started and brought on line quickly. Circulation systems' lubricating gears and bearings

Shell Spirax S6 ATF ZM Previous Name: Donax TZ

Premium Heavy Duty Transmission Oil for ZF Long Drain

Shell Spirax S6 ATF ZM main applications:

• Heavy duty automatic transmissions                                  Shell Spirax S6 ATF ZM can also be used in all ZF-Ecomat - and ZF-Ecolife transmissions, and where retarders are used.

Shell Spirax S6 ATF ZM Oil is a fully synthetic, premium quality, heavy-duty automatic transmission oil specifically designed in partnership with ZF as a lubricant for the newest generation of ZF-Ecomat - and ZFEcolife transmissions. Spirax S6 ATF ZM is the ultimate performance automatic transmission fluid allowing extended drain intervals even under the most severe conditions.

Please note!! Price of Shell Spirax S6 ATF ZM drops automatically in larger quantities.

Houghton Macron 400 M-32

Properties

Macron 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 400 M-32 is free from zinc, chlorine and active sulphur.

Applications

Macron 400 M-32 is a high performance cutting oil for operations on light and medium alloyed steels, aluminium and yellow metals.

Macron 400 M-32 has multipurpose oil characteristics for cutting and hydraulic oil HLP DIN 51524-2 and gear oil CLP DIN 51517-3.

It has a good de-aeration power, does not foam and is not aggressive for the paints on machine tools.

MACRON 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MACRON 400 M-32 is free from zinc, chlorine and active sulphur. 

Advantages:

• Increased productivity - reduced machine downtime.
• Reduced cost - long sump life.
• Secure handling - fulfills HLP 1 CLP standards.
• Secure handling - high EHS standard.

Q8 El Greco 150

Applications Q8 El Greco 150

Industrial gear drives

Windturbine gears.

Your advantage! Price of Q8 El Greco 150 drops automatically in larger quantities.

Klübersynth GEM 2-220

Synthetic high-performance gear oils

Application Klübersynth GEM 2-220

Klübersynth GEM 2 oils may be used for the lubrication of spur, bevel and worm gears as well as the associated machine elements such as sliding and rolling bearings. Furthermore, they are particularly suited for applications where leaking or dripping lubricant might pose a hazard to the environment.

Klübersynth GEM 4-320 N

Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology

Application Klübersynth GEM 4-320 N

Klübersynth GEM 4 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klübersynth GEM 4 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps, especially in applications where the equipment is exposed to elevated temperatures or pronounced temperature fluctuations.

Mobil Pegasus 805

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus 805 are:

• Caterpillar, Superior, Waukesha and other turbocharged, naturally aspirated, medium to high speed four-cycle engines requiring a low ash oil
• Engines experiencing valve face and seat wear
• Lean-burn and stoichiometric four-cycle engines
• Engines equipped with catalytic converters
• Applications using alternate fuels containing low levels of sulfur or chlorine
• In field gathering operations where sour gas (low levels of H2S) is used as fuel
  
  

Your advantage: Price of Mobil Pegasus 805 drops automatically with higher volumes.

Shell Spirax S2G 80w-90

Properties

Shell Spirax S3 G 80W is a mineral automotive gear oil containing multi-functional additives required for mild extreme pressure conditions. Shell Spirax G 80w-90 is also known as Shell 80w-90 or 80w90 or 80W/90.

Manual gearboxes
Spirax S2 G are essentially for the lubrication of manual gearboxes of passenger cars and commercial vehicles operating under high speed/low torque and low speed/high torque conditions. Suitable for gearboxes fitted with synchromesh.

Rear axles
Suitable for applications presenting conditions of medium severity, such as light duty commercial vehicles and passenger cars.

Not suitable for heavy duty hypoid axles.

Spirax S3 AS 80W-140 Previous Name: Shell Spirax ST 80W-140

High performance, GL-5 axle oil for Scania

Spirax S3 AS 80W-140 main applications:

• Automotive transmissions

Shell Spirax S3 AS 80W-140 is designed for use in a wide variety of automotive axle units subjected to heavy duty conditions. The use of high performance additive systems and selected base oils allows extended oil drain capability in some applications. In addition, Spirax S3 AS 80W-140 may be used in non-synchronised heavy duty gearboxes and certain synchronised heavy duty gearboxes where oils meeting API GL-5 or MT-1 are specified.

Please note!! Price of Spirax S3 AS 80W-140 drops automatically in larger quantities.

Shell Tellus S4 ME 46 Previous name: Shell Tellus EE

Energy efficient high-performance hydraulic oil

Benefits of the Tellus S4 ME 46 are:

• + Long oil change intervals and protection
• + Energy Efficiency

Shell Tellus S4 ME 46 has been specially designed to help reduce the energy and operating costs of hydraulic systems while maintaining good protection of the hydraulic system.
Shell Tellus S4 ME 46 has a significant improvement in energy efficiency in many applications such as injection moulding machines, metal presses and mining conveyors.
In addition, Shell Tellus S4 ME 46 has very good wear protection and long oil life, which can extend oil change intervals and reduce maintenance costs.

Houghton Garia 405 M-22

Properties

GARIA 405 M-22 is based on hydro treated mineral oil with low aromatic content. A combination of polar. extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

GARIA 405 M-22 contains active sulphur and may discolour yellow metals.

The oil is zinc and chlorine free.

Applications

GARIA 405 M-22 is the universal oil for the gear shop. It shows excellent performance for the gear grinding as well as for gear hobbing and shaping operations.

GARIA 405 M-22 is used also for the machining of steel and cast iron on automatic turning lathes.

Approvals

Hofler and Klingelnberg.

Houghton Macron 2425 S-14

Properties

Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.

Applications

Macron 2425 S-14 is a high performance grinding oil, used for flute grinding on high-speed steel, and with ceramic and diamond or boron nitrite grinding wheels.

Macron 2425 S-14 can also be used for grinding spiral toothed bevel gears and flat or cylindrical grinding processes, on the complete range of steels and non-ferrous metals.

Approvals

Product is approved by Liebherr, Kapp, Niles, Junker, Hofler, Klingelnberg.

Shell Vacuum Pump Oil S3 RX 100

Oil for Rotary Vacuum Pump

Application Shell Vacuum Pump Oil S3 RX 100

Rotary Vacuum Pumps. Shell Vacuum Pump Oil S3 RX 100 is designed for the lubrication of rotary and vane vacuum pumps and can be used to provide low vacuum pressure. It is suitable for the lubrication of most laboratory and industrial vacuum pumps. Standard Operating Environments. Shell Vacuum Pump Oil S3 RX 100 is suitable for applications where ambient temperatures exceed 0°C and maximum operating temperatures do not exceed 100°C. The vacuum range generally tends to decrease as the operating temperature of the pump increases. Shell Vacuum Pump Oil S3 RX 100 is suitable for vacuum pumps operating between atmospheric pressures of 1 mbar - 10-3 mbar. Shell Vacuum Pump Oil S3 RX 100 is not recommended for use when corrosive gases or chemical vapors are involved in the extraction process.

Q8 El Greco 320

Applications Q8 El Greco 320

Industrial gear drives

Windturbine gears.

Your advantage! Price of Q8 El Greco 320 drops automatically in larger quantities.

Q8 Schumann G 220

Applications Q8 Schumann G 220

Industrial gear oil based on high quality synthetic PAO base oil

Your advantage! Price of Q8 Schumann G 220 drops automatically in larger quantities.

Q8 Vermeer WDS 220

Paper machine circulating oil based on very high quality synthetic base oils (PAO)

Applications Q8 Vermeer WDS 220

Lubrication of industrial paper machine circulating systems for the wet- and dry-end. Q8 Vermeer WDS is formulated to meet the high demands of certain lubrication systems e.g. when steam pressures and bearing temperatures are high.

Your advantage! Price of Q8 Vermeer WDS 220 drops automatically in larger quantities.

Houghton Macron 205 M-8

Properties

Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 205 M-8 is zinc and sulphur free.

Applications

Macron 205 M-8 is a universal honing, superfinishing and grinding oil.

Typical application is in the bearing industry and electronic industry for fine machining of aluminium and yellow metals.

Macron  205 M-8 has higher viscosity compared to other typical honing oils.