Buy Lubricants — mineral, synthetic, dry & adhesive

Shell Omala S3 GP 220

Properties

Shell Omala S3 GP oil provides extreme-load protection and performance for industrial gears.

It is designed to help solve problems associated with worn, misaligned and contaminated gears.

It is an oil that you can rely on to help prevent foaming and water contamination, which can reduce gear performance under extreme pressure and contaminated conditions.

Protecting gears from damage can help to increase service life and maximise your return on investment. Shell Omala S3 GP is specifically
formulated to protect under shock-load, extreme-load and contaminated conditions.

Approvals

ANSI/AGMA 9005-E02 (EP)
Arcelor Mittal FT163
David Brown S1.53.101E, except ISO 1500
DIN 51517-3 (CLP), except ISO 1500
ISO 12925-1 Type CKD, except ISO 1500
US Steel 224

Shell Turbo S4 X 32 

Premium based industrial steam, gas and combined cycle turbine lubricant

Shell Turbo S4 X 32 main applications:

• Power and industrial steam, gas & combined cycle turbines Shell Turbo S4 X 32 is used as the lubricating oil of choice in modern steam, gas and combined cycle turbines.
• Note that some applications with highly loaded gearboxes require a lubricant with enhanced anti-wear performance - for these applications use Shell Turbo S4 GX.
• Further industrial applications
  Shell Turbo S4 X 32 may also be used for other industrial applications requiring a high performance gas turbine oil, such as the lubrication of turbo compressors.

Shell Turbo S4 X 32 is based on Gas-to-Liquid (GTL) technology and has been developed to meet the demands of the latest high efficiency turbine systems. Designed to offer outstanding, long term performance under the most severe operating conditions Shell Turbo S4 X 32 will minimise deposit and sludge formation even under cyclic peak loading conditions.

Shell Morlina S2 B 68 Previously Morlina 68

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 68 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 68 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 68 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 68 drops automatically with larger quantities.

TOTAL HYDRANSAFE HFC 146

Fire resistant hydraulic fluid.

Applications TOTAL HYDRANSAFE HFC 146

• HYDRANSAFE HFC 146 is a high performance synthetic water-polymer, fireresistant hydraulic fluid.
• regulation and hydraulic circuits of Furnaces, Continuous Casting Units in the Steel and Aluminium Industry, Heat-treat Ovens for quenching operations, Drying Furnace and other applications in fire risk areas, as in mining industry
• Hydraulic systems of mould injection machines.
• Operating temperature range is from - 20 °C to + 60 °C.
• When changing from a mineral oil based hydraulic system components and to apply an appropriate cleaning of the hydraulic system

Your advantage! Price of TOTAL HYDRANSAFE HFC 146 drops automatically in larger quantities.

Shell Morlina S2 B 680 Previously Morlina 680

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 680 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 680 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 680 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 680 drops automatically with larger quantities.

Shell Turbo Oil T 100

High Quality Industrial Steam & Gas Turbine Oils

Shell Turbo Oil T 100 main applications:

Shell Turbo Oils T 100 are available in ISO grades 32, 46, 100 & 100 and are suited for application in the following areas:

• Industrial steam turbines & light duty gas turbines which require no enhanced anti-wear performance for the gearbox;
• Hydroelectric turbine lubrication;
• Numerous applications where strong control over rust and oxidation is required.
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended.

Shell Turbo Oils T 100 have long been regarded as the industry standard turbine oil. Building on this reputation, Shell Turbo Oils T 100 have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox.
Shell Turbo Oils T 100 are formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust & corrosion, low foaming and excellent demulsibility.

Please note!! Price of Shell Turbo Oil T 100 drops automatically in larger quantities.

Spirax S3 AM 80W-90 Previous Name: Shell Spirax MX 80W-90

High performance, GL-4/5 Universal Gear Oil for MAN, ZF, MACK and Scania

Spirax S3 AM 80W-90 main applications:

• Passenger car automatic transmissions
• Heavy duty automatic transmissions
• Power steering units
• Hydraulic power systems

Shell Spirax S3 AM 80W-90 is a true universal driveline oil designed for use in modern heavy duty axles and gearboxes offering the convenience of one transmission oil for the whole driveline. Specially optimised mineral base oils and new additive technology improve lubrication of the drive train and potentially extend oil drain intervals. For e.g. MAN, ZF, MACK and Scania.

Please note!! Price of Spirax S3 AM 80W-90 drops automatically in larger quantities.

Q8 Mahler GR8 SAE 40

High performance stationary gas engine oil, based on premium hydrocracked base oil (synthetic base oil)

Applications Q8 Mahler GR8 SAE 40

High performance stationary gas engine oil, based on premium hydrocracked base oil (synthetic base oil)

Your advantage! Price of Q8 Mahler GR8 SAE 40 drops automatically in larger quantities.

Previously: Shell Donax TCS 10W-40

High performance synthetic oil for transmissions of earthmoving and agricultural machinery.

Shell Spirax S6 CXME 10W-40 is designed to provide operators with carefree operation and maximum reliability over the life of their equipment. Spirax S6 CXME 10W-40 meets the high demands of Modern Transmissions, Differential, End Drives, Wet Brakes and hydraulic systems of heavy-duty off-highway materials (earthmoving, road construction, construction, mining, quarries ....).

Applications

Shell Spirax S6 CXME 10W-40 is recommended for use in heavy-duty off-road machines from leading manufacturers including, but not limited to, Caterpillar and Komatsu, and transmissions produced by Eaton, ZF, & nbsp;& middot; Dana, Rockwell among others:

• Powershift Transfers and Intermediate Differences
• End drives, differentiators and reducers
• Wet Braking
• Hydraulic systems and hydrostatic transmissions

Shell Helix HX8 ECT C3 5W-30

Fully synthetic motor oil - Relentless performance, cleansing and protection

Application Shell Helix HX8 ECT C3 5W-30

Shell Helix HX8 ECT C3 uses Shell’s advanced emissionscompatible technology to help protect the vehicle’s emission system. Its low-SAPs formulation helps to keep diesel particulate filters clean and protects them from ash build-up that can block the exhaust system and lead to reduced engine performance

Shell Helix HX8 ECT C3 can be used for modern gasoline engines, diesel engines with particulate filters and gas engines

Mobil DTE 846

Superior Performance Turbine Oils

Application Mobil DTE 846

Mobil DTE 832 and 846 are superior performance turbine oils designed for use in steam and gas turbine oil systems, direct- or gear-coupled and turbine speed control mechanisms. Specific applications include: Combined cycle (CCGT) electric power generation applications including those with a common circulation system for the steam turbine and gas turbine. Lubrication of steam turbine or gas turbine units used for electric power generation, natural gas pipeline transmission, process operations and cogeneration plants.

Fuchs Renolin EP 220, previously RENOLIN CLP 220

Heavy duty - EP 220 - industrial gear oils of highest performance, outstanding extreme pressure characteristics and load carrying capacity

Renolin EP 220 field of applications:

The RENOLIN EP 220 oils are recommended for industrial spur-, helical- and bevel enclosed gears with circulation or splash lubrication, operating at oil temperatures up to 100ºC and peaks above (up to 120ºC).

TOTAL CIRKAN C 68

High quality oils for moving parts.

Applications CIRKAN C 68

CIRKAN C oils are pure mineral oils with appropriate viscosities for loss lubrication of:

• moving parts
• swivels
• journals
• chains

Your advantage! Price of TOTAL CIRKAN C 68 drops automatically in larger quantities.

Shell Omala S3 GP oil provides extreme-load protection and performance for industrial gears. It is designed to help with worn, misaligned and contaminated gears. It helps prevent foaming and water contamination, which can reduce gear performance under extreme pressure and contaminated conditions.

Shell Turbo S4 GX 46

Premium based industrial steam, gas and combined cycle turbine lubricant for geared turbines

Application Shell Turbo S4 GX 46

Power and industrial steam, gas & combined cycle turbines. Shell Turbo S4 GX 46 is used as the lubricating oil of choice in modern steam, gas and combined cycle turbines, especially those needing enhanced anti-wear performance to protect highly loaded gearboxes.

Further industrial applications. Shell Turbo S4 GX 46 may also be used for other industrial applications requiring a high performance gas turbine oil, such as the lubrication of turbo compressors

Shell Spirax S2G 80w-90

Properties

Shell Spirax S3 G 80W is a mineral automotive gear oil containing multi-functional additives required for mild extreme pressure conditions. Shell Spirax G 80w-90 is also known as Shell 80w-90 or 80w90 or 80W/90.

Manual gearboxes
Spirax S2 G are essentially for the lubrication of manual gearboxes of passenger cars and commercial vehicles operating under high speed/low torque and low speed/high torque conditions. Suitable for gearboxes fitted with synchromesh.

Rear axles
Suitable for applications presenting conditions of medium severity, such as light duty commercial vehicles and passenger cars.

Not suitable for heavy duty hypoid axles.

Shell Rimula R6 ME 5W-30

Fully Synthetic Heavy Duty Diesel Engine Oil

Shell Rimula R6 ME 5W-30 main applications:

• On-highway heavy duty applications
• Low emission engine use

Shell Rimula R6 ME 5W30 oils deliver highly responsive protection, enhanced fuel economy with no compromise in durability, maintenance saving, long drain performance coupled with protection against soot induced wear, piston and engine deposits.

Please note!! Price of Shell Rimula R6 ME 5W-30 drops automatically in larger quantities.

RENISO C85E

Refrigeration oils for CO2 compressors

RENISO C85E field of applications:

The RENISO C refrigeration oils were specifically developed for use in refrigeration systems that are run on carbon dioxide refrigerant. Due to their favourable miscibility properties, sufficient oil reflux is ensured at low evaporation temperatures in particular. The areas of application are in practically all fields of industrial and commercial refrigeration, e.g. walk-in freezer units and aggregate cooling systems.

Please note!! Price of RENISO C85E drops automatically in larger quantities.

Shell Morlina S2 B 460 Previously Morlina 460

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 460 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 460 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 460 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 460 drops automatically with larger quantities.

TOTAL CARTER EP 1500

Viscous semi-synthetic oils for enclosed gears.

Applications TOTAL CARTER EP 1500

The viscous CARTER EP oils have been specially designed for lubricating enclosed gears operating under severe conditions:

• heavy loads
• slow to very slow moving parts
• shocks
• High temperatures

Your advantage! Price of TOTAL CARTER EP 1500 drops automatically in larger quantities.