Klüber Klüberbio LG 39-701 N
97% supplied in 5 working days
Bank transfer or Credit Card (master card & visa) payment
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
UK Deliveries
incoterm DAP
QUESTIONS?
Klüber Klüberbio LG 39-701 N
Eco-compatible operating lubricant for open gear drives
Application Klüber Klüberbio LG 39-701 N
Klüberbio LG 39-701 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for sliding surfaces with high surface pressure. The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high load-carrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.
Performance, Features & Benefits of Klüber Klüberbio LG 39-701 N are:
- Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 GP (Vessel General Permit)
- Lower environmental impact in the event of leakage. The base oil consists of renewable raw materials and is ultimately biodegradable
- Good low-temperature behaviour enables operation of open gear drives in cold conditions
- Selected additives ensure longer component life and reduced wear
- Cost reduction due to low consumption when applied by selected spraying systems
- Meets requirements for OSPAR conformance, including Norway Yellow 1, Denmark (registration number 2486711) and Cefas E (registration number 27078)
If you have any questions, please contact OlieOnline Technical Helpdesk
Product Description Klüber Klüberbio LG 39-701 N
Are you a manufacturer or operator of open gear drives, jack-up lifting systems or other on-board equipment that is frequently in contact with sea water? In that case you are likely to be interested in obtaining an eco-friendly, high-performance operating lubricant. Our Klüberbio LG 39-701 N is a high-performance grease with a new type of base oil and additive package. It combines very good eco-friendliness with high load-carrying capacity, good antiwear and anticorrosive effect and excellent adhesion to surfaces. The high-viscosity base oil of Klüberbio LG 39-701 N comes from 100 % renewable resources. Klüberbio LG 39-701 N complies with the 2013 Vessel General Permit requirements of the Environmental Protection Agency (EPA) in terms of biodegradability, minimal toxicity and bioaccumulation to be met by Environmentally Acceptable Lubricants. Due to the lubricant's excellent low-temperature behaviour, it can be pumped in centralised lubricating systems down to -30 °C and sprayed even below 0 °C. These positive product characteristics enable you to use the lubricant over a wider temperature range than is common with mineral-oil-based greases of the same base oil viscosity. Klüberbio LG 39-701 N enables a further reduction of more than 50 % in lubricant consumption in jack-up lifting systems if spray application is used. This will further reduce your operating costs and is beneficial to the environment.
Typical Characteristics
| Product specifications : | Klüber Klüberbio LG 39-701 N | |
| Article number | 009050 | |
| Vessel General Permit | passed | |
| Biodegradability according to OECD 301 F, (within 28 days) | >= 60 % | |
| Chemical composition, type of oil | natural ester | |
| Chemical composition, thickener | calcium soap | |
| Lower service temperature | -30 °C / -22 °FF | |
| Upper service temperature | 100 °C / 212 °F | |
| Colour space | beige | |
| Texture | homogeneous | |
| Density at 20 °C | approx. 0.94 g/cm³ | |
| Worked penetration, 25 °C, lower limit value | DIN ISO 2137 | 300 x 0.1 mm |
| Worked penetration, 25 °C, upper limit value | DIN ISO 2137 | 330 x 0.1 mm |
| Kinematic viscosity of the base oil, 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 680 mm²/s |
| Kinematic viscosity of the base oil, 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | approx. 90 mm²/s |
| Flow pressure of lubricating greases, test temperature: -30 °C | DIN 51805-2 | <= 1 400 mbar |
| FZG scuffing test, based on scuffing load stage | DIN ISO 14635, A/2,76/50 | > 12 |
| Four-ball tester, welding load, | DIN 51350 pt. 04 | >= 5 500 N |
| Drop point, | DIN ISO 2176, IP 396 | >= 100 °C |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
24 months |
Application notes
Klüberbio LG 39-701 N can be continuously applied by means of transfer pinion lubrication, spray systems or by brush. The required lubricant quantity depends on the operating conditions in each individual case. Our sales engineers will be pleased to assist you in determining lubricating quantities.
You may also be interested in
-
![Klüber Klüberbio LG 39-700 N]()
Klüber Klüberbio LG 39-700 NStarting at: £ 33.78 / Kg
Discover the benefits of OilOnline!
Are you looking to buy oil from OilOnline? Then you can take advantage of many benefits:
Our knowledge
is your strength!
At OilOnline, we have a team of passionate lubricant specialists with extensive knowledge and experience.
Detailed
advice
Our experts will assist you in choosing the best products, so you can get the most out of your vehicle or machine.
Uncompromising
Quality
At OilOnline, we only offer lubricants from globally renowned quality brands.
Save on
Lubricants
By ordering larger quantities, you can take advantage of price benefits at OilOnline.