Lubricants

FUCHS Cassida FM Coolant

Synthetic freezing point depressant and anti corrosion protection concentrate for food and beverage processing equipment

Application FUCHS Cassida FM Coolant

To be mixed with water to make a solution suitable for application. See tables on next pages. The mixing water should have low hardness. If not available the use of demineralised or distilled water is recommended. For use as secondary cooling, or heating, in the food and beverage industry. For use in closed cooling systems, including those where there is a potential for incidental food contact. STRICTLY NOT for use in applications where direct contact between coolant and food itself, either packed or unwrapped, will occur: e.g., not for use where food is immersed in coolant for rapid chilling. Various deicing, defrosting applications. Freeze, burst and corrosion protection of pipelines.

Klüber Summit SH 32

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 32

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Cassida Fluid HFS 46

Synthetic hydraulic fluids for food and beverage processing equipment

CASSIDA FLUID FLUID HFS 46 are high performance, anti-wear multi-purpose lubricants with boosted solvency, specially developed for use in machinery used in the food and beverage processing and packaging industry. Cassida Fluid HFS 46 Applications are:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

Klüber Klübersynth BEP 72-82

Rolling bearing grease for long-term lubrication

Application Klüber Klübersynth BEP 72-82

Klübersynth BEP 72-82 was especially developed for rolling bearings typically used in motor vehicles. Due to its performance characteristics Klübersynth BEP 72-82 can be used for the lifetime lubrication of many bearings, e.g. belt tensioner bearings (with rotating outer ring), clutch release bearings, viscous coupling bearings, drive shaft bearings, radiator fan bearings as well as deep groove ball bearings used in various types of electric motors and in all other bearings subject to high speeds and loads.

Cassida Fluid HF 46 Previous Name: Shell Cassida 46

Hydraulic fluids for food manufacturing machinery

Cassida Fluid HF 46 main applications:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

Cassida Fluid HF 46 are high performance, anti-wear multipurpose lubricants, specially developed for use in machinery used in the food and beverage processing and packaging industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid HF 46 drops automatically in larger quantities.

CASSIDA FLUID HF 68 Previous Name: Shell Cassida 68

Hydraulic fluids for food manufacturing machinery

CASSIDA FLUID HF 68 main applications:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

CASSIDA FLUID HF 68 are high performance, anti-wear multipurpose lubricants, specially developed for use in machinery used in the food and beverage processing and packaging industry.

Pay attention! Price of CASSIDA FLUID HF 68 drops automatically in larger quantities.

Klüber ASONIC GLY 32

Low-temperature lubricating grease for high-speed, low-noise rolling bearings

Application Klüber ASONIC GLY 32

ASONIC GLY 32 is used, for example, for the long-term or lifetime lubrication of rolling bearings in electric motors in applications where a low starting-up torque at low temperatures is required. As examples of the multitude of highly specialised applications of ASONIC GLY 32, the following may be mentioned:

• miniature and small bearings in fans, motors and pumps contained in precision equipment household appliances and automobile air conditioners
• integrated bearing units in audio and video equipment, computer peripherals and office equipment

Klüber Klüberquiet BQR 78-102

Low-noise rolling bearing grease for long-term lubrication

Application Klüber Klüberquiet BQR 78-102

Klüberquiet BQR 78-102 is primarily used to lubricate sealed ball bearings in electric motors, fans or similar applications in cars, where they have to offer a long service life at aboveaverage permanent temperatures while preventing noise generation.

FM HEAT TRANSFER FLUID 32

Heat transfer fluid for use in food manufacturing industry

FM HEAT TRANSFER FLUID 32 main applications:

• Heat transfer systems with a bulk oil temperature range of approximately -10 °C to max. +325 °C where the surface temperature of the heating elements (oil fi lm temperature) should not exceed +340 °C.

FM HEAT TRANSFER FLUID is designed for closed circuit and pressureless heat transfer systems. It is based on a careful blend of highly refi ned oils and additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of FM HEAT TRANSFER FLUID 32 drops automatically in larger quantities.

Grotanol SR2

Properties

Grotanol SR 2 is efficient against microbiological accumulation (bio-films) in systems and has an excellent immediate efficiency against bacteria, yeasts and fungi. Additionally, grotanol SR 2 has anticorrosive and low-foaming properties.

High concentrated and free of water.

Effective even in very low use-concentrations.

Usable for all steel-, copper and aluminium alloys.

Suitable for low to medium alcalic medium (pH 8 - 11)

Contains no organically bound chlorine (has no effect on the AOX value).

Mobil EAL Arctic 100

Refrigeration compressor oils

Application Mobil EAL Arctic 100

Application considerations: Mobil EAL Arctic Series oils are hygroscopic and measures must be taken to prevent the absorption of moisture. Packages should be tightly sealed when not in use and small packages are preferred. The product should not be placed in a plastic container if this can absorb moisture. Mobil EAL Arctic Series oils are recommended for refrigeration systems where refrigerants containing HFC or carbon dioxide are used. Typical applications are: Domestic refrigeration such as refrigerators, freezers, air conditioners and heat pumps. Commercial refrigeration systems such as air conditioners in offices, shopping centres and hotels and in mobile refrigeration systems. Industrial applications such as food preparation and freezing and refrigeration applications.

RENISO TRITON SE 55

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SE 55 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SE 55 drops automatically in larger quantities.

CASTROL Spheerol™ BNS 2

High temperature bearing grease

Application CASTROL Spheerol™ BNS 2

Spheerol BNS 2 is suitable for the lubrication of bearings at high temperatures, such as soot blower bearings, in carriages for hardening, drying in tunnel ovens, also in bearings of bitumen mixing plants, cranes in foundries, etc. Spheerol BNS 2 can be used at a temperature range of -20ºC to +150ºC, and for short periods at a temperature range of up to +220ºC. Frequent re-greasing or grease change should be considered subject to application requirements.

Your advantage! Price of CASTROL Spheerol™ BNS 2 drops automatically in larger quantities.

RENISO TRITON SEZ 32

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SEZ 32 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SEZ 32 drops automatically in larger quantities.

Cassida Fluid GL 150

Food grade Gear oil 150 NSF H1 certified

Cassida Fluid GL 150 main applications:

• Lubrication of enclosed gearboxes used in the food industry.
• Also intended for use in equipment manufacturing food packaging.

Cassida Fluid GL 150 are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. Cassida Fluid GL 150 are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid GL 150 drops automatically in larger quantities.

CASSIDA FLUID GL 220 

Gear lubricants for use in food manufacturing equipment

CASSIDA FLUID GL 220 main applications:

• Lubrication of enclosed gearboxes used in the food industry.
• Also intended for use in equipment manufacturing food packaging.

CASSIDA FLUID GL 220 are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage: Price of CASSIDA FLUID GL 220 drops automatically in larger quantities.

Cassida Fluid GL 320

Gear lubricants for use in food manufacturing equipment

Cassida Fluid GL 320 main applications:

• Lubrication of enclosed gearboxes used in the food industry.
• Also intended for use in equipment manufacturing food packaging.

Cassida Fluid GL 320 are high performance, anti-wear gear oils specially developed for the lubrication of enclosed gears in food and beverage processing machinery. Cassida Fluid GL 320 are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid GL 320 drops automatically in larger quantities.

Cassida Fluid HF 15 Previous Name: Shell Cassida 15

Hydraulic fluids for food manufacturing machinery

Cassida Fluid HF 15 main applications:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

Cassida Fluid HF 15 are high performance, anti-wear multipurpose lubricants, specially developed for use in machinery used in the food and beverage processing and packaging industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid HF 15 drops automatically in larger quantities.

Cassida Fluid HF 32 Previous Name: Shell Cassida 32

Hydraulic fluids for food manufacturing machinery

Cassida Fluid HF 32 main applications:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

Cassida Fluid HF 32 are high performance, anti-wear multipurpose lubricants, specially developed for use in machinery used in the food and beverage processing and packaging industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid HF 32 drops automatically in larger quantities.

CASSIDA FLUID HF 100 Previous Name: Shell Cassida 100

Hydraulic fluids for food manufacturing machinery

CASSIDA FLUID HF 100 main applications:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

CASSIDA FLUID HF 100 are high performance, anti-wear multipurpose lubricants, specially developed for use in machinery used in the food and beverage processing and packaging industry.

Pay attention! Price of CASSIDA FLUID HF 100 drops automatically in larger quantities.