Total

TOTAL AZOLLA ZS 46

Very high performance anti-wear hydraulic oils.

Applications TOTAL AZOLLA ZS 46

• Designed for use in all kind of hydraulic sytems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment.
• Also used in many other applications, where an universal high performance antiwear lubricant is the first choice : low charged gears, sliding and roller bearings, air compressors, servo-motors and control systems equipped with fine filtration systems.

Your advantage! Price of TOTAL AZOLLA ZS 46 drops automatically in larger quantities.

TOTAL CERAN XM 220

Extreme-pressure water resistant high temperature “NEW GENERATION” calcium sulfonate complex grease.

Applications CERAN XM 220

• CERAN XM 220 is made of the NEW GENERATION calcium sulfonate complex soap designed by TOTAL Lubrifiants. This new soap has enhanced properties in terms of water resistance, load capacity, thermal resistance, anticorrosion properties while keeping a very high level of pumpability and ability to lubricate well in case of high speeds.
• CERAN XM 220 is suitable for the lubrication of all kinds of components subject to high loads, shocks, working in conditions where the grease is in frequent contact with water (even sea water due to enhanced antirust performances).
• CERAN XM 220 is suitable for the lubrication of continuous castings and rolling mills in steel plants, bearings in wet and dry (felt rolls) sections of paper mills and all industrial applications under severe conditions (wet, loaded, high temperature, dust,…)
• CERAN XM 220 is suitable for use in centralized greasing systems.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

Your advantage! Price of TOTAL CERAN XM 220 drops automatically in larger quantities.

TOTAL AZOLLA DZF 46

Detergent anti-wear hydraulic oils.

Applications TOTAL AZOLLA DZF 46

• Any hydraulic circuits where significant amounts of water are unavoidably introduced and when it is impossible to drain off the water (for instance on circuits that work around the clock).
• Any hydraulic circuits working under loaded conditions : lubrication of stamping presses for example (Müller Weingarten approval).
• Any hydraulic circuits subjected to high levels of pollution.

Your advantage! Price of TOTAL AZOLLA DZF 46 drops automatically in larger quantities.

TOTAL AZOLLA AF 46

Antiwear, ashless hydraulic oils

Applications TOTAL AZOLLA AF 46

• Hydraulic systems operating under high pressure and/or temperature conditions.
• High-pressue vane, piston or gear pumps.
• Sensitive hydraulic circuits requiring absolute filterability of the fluid (very fine servo valve play) : plastic moulding machines.
• Any hydraulic system where the risk of contamination of the environment and waters exists.
• Any application where an antiwear, high-performance oil is necessary : various movements, plain bearings and rolling bearings, reducers under low load, etc. .
• Lubrication of circuits in which the presence of water is accidental : machine tools, farm and food products industries, paper mills, steel making, etc.

Your advantage! Price of TOTAL AZOLLA AF 46 drops automatically in larger quantities.

TOTAL EQUIVIS ZS 46

High viscosity index anti-wear hydraulic oils.

Applications TOTAL EQUIVIS ZS 46

• EQUIVIS ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature
• Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

Your advantage! Price of TOTAL EQUIVIS ZS 46 drops automatically in larger quantities.

TOTAL EQUIVIS AF 46

High viscosity index hydraulic oils.

Applications TOTAL EQUIVIS AF 46

EQUIVIS AF is a “zinc-free” high performance hydraulic fluid for:

• all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points).
• hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature (-30°C) and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

Your advantage! Price of TOTAL EQUIVIS AF 46 drops automatically in larger quantities.

TOTAL EQUIVIS D 46

Detergent hydraulic oil with a high viscosity index

Applications TOTAL EQUIVIS D 46

Any hydraulic system where significant amounts of water in the system cannot be prevented and when it is impossible to drain water. The detergent additive guarantees a high operational reliability even under unfavourable working conditions. High water content in particular. The high viscosity index ensures proper operation of the hydraulic system over a wide temperature range.

Your advantage! Price of TOTAL EQUIVIS D 46 drops automatically in larger quantities.

TOTAL PNEUMA 46

Mineral oils for pneumatic tools.

Applications TOTAL PNEUMA 46

• PNEUMA are formulated from high quality base stocks and specific additives
• Meet the requirements of pneumatically operated rock drills lubrication in underground and surface mining operation.

Your advantage! Price of TOTAL PNEUMA 46 drops automatically in larger quantities.

TOTAL DACNIS LD 46

Hydrocracked mineral oils for lubricated screw air compressors.

Applications TOTAL DACNIS LD 46

• Hydrocracked mineral oils with very high-performance additivation for lubrication of lubricated screw air compressors.
• DACNIS LD is characterized by its longer drain interval, which can reach 4000h for lubricated screw compressors, under standard conditions of use.
• Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised

Your advantage! Price of TOTAL DACNIS LD 46 drops automatically in larger quantities.

TOTAL DACNIS 46

Mineral oils for rotary and reciprocating air compressors.

Applications TOTAL DACNIS 46

• Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:                     . for screw compressors : DACNIS 32, 46, or 68                         . for reciprocating compressors : DACNIS 68, 100 or 150.
• For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

Your advantage! Price of TOTAL DACNIS 46 drops automatically in larger quantities.

TOTAL PRESLIA 46

Mineral turbine oils.

Applications TOTAL PRESLIA 46

• PRESLIA oils are specially designed for the lubrication of hydraulic, steam or gas turbines. They can also be used in centrifugal compressors or turbochargers.

Your advantage! Price of TOTAL PRESLIA 46 drops automatically in larger quantities.

TOTAL LUNARIA NH 46

Additive enhanced hydrocracked mineral oil for ammonia (R 717) refrigerating compressors.

Applications TOTAL LUNARIA NH 46

• Lubrication of refrigerating compressors (reciprocating and screw) using ammonia as a refrigerant.
• Hydrocracked technology of base oils to improve oil drain interval
• Field of application : evaporator temperature down to -30°C.

Your advantage! Price of TOTAL LUNARIA NH 46 drops automatically in larger quantities.

Total Ceran HV

Extreme-pressure water resistant high temperature calcium sulfonate complex grease.

Applications Total Ceran HV

• CERAN HV is a heavy duty extreme pressure grease, pre-eminently designed for the lubrication of industrial bearings working under high temperatures and high loads in the steel industry.
• CERAN HV is also suitable as EP multi purpose grease, in various other industrial applications where water is in frequent contact with the grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

TOTAL NEVASTANE AW 46

Hydraulic oils, suitable for incidental food contact.

Applications TOTAL NEVASTANE AW 46

• NEVASTANE AW oils are recommended for any high pressure hydraulic system and/or airline lubricators in the food processing industries.
• NEVASTANE AW formulation is based on white mineral oil and high performance additives provides excellent protection of the equipment even at high temperatures.

Your advantage! Price of TOTAL NEVASTANE AW 46 drops automatically in larger quantities.

Total Ceran XM 460

Extreme-pressure water resistant high temperature “NEW GENERATION” calcium sulfonate complex grease

Applications Total Ceran XM 460

• CERAN XM 460 is made of the NEW GENERATION calcium sulfonate complex soap designed by TOTAL Lubrifiants. This new soap has enhanced properties in terms of water and thermal resistance, load capacity, anticorrosion properties while keeping a very high level of pumpability and ability to lubricate well in case of high loads.
• CERAN XM 460 is suitable for the lubrication of all kinds of components subject to high loads and temperatures, shocks, working in conditions where the grease is in frequent contact with water (even sea water due to enhanced antirust performances).
• CERAN XM 460 is suitable for the lubrication of bearings in steel plants (continuous castings and rolling mills) and in paper industry. Ceran XM 460 is also suitable for the lubrification of hard wood granular presses and in all industrial applications under severe conditions (wet, loaded, high temperature, dust,…) namely mining and cement industries.
• CERAN XM 460 is suitable for use in centralized greasing systems.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

Total Nevastane XS 320

Food grade extreme pressure calcium sulfonate complex grease.

Applications Total Nevastane XS 320

• NEVASTANE XS 320 is an extreme pressure grease dedicated to the lubrication in food industry under very severe conditions: water, high load, high temperature, dust
• NEVASTANE XS 320 is recommended for the lubrication of pelleting presses (KAHL, Promill Stolz, CPM , UMT, Van Aarsen…) in feed and sugar industries

Total Nevastane XS 80

Low temperature extreme-pressure calcium sulfonate complex grease for food and food related industry.

Applications Total Nevastane XS 80

• NEVASTANE XS 80 is a heavy duty multi purpose premium grease, based on an overbased calcium complex technology and synthetic oil especially designed for applications working under very low temperatures and/or high load conditions.
• NEVASTANE XS 80 is an EP multi purpose grease, recommended for various applications in the food and food related industry operating under severe conditions (high load, high temperature, water, dust).
• NEVASTANE XS 80 is very suitable to lubricate pelleting presses used in feed industry (pet food, sugar beet): KAHL, PROMILL, CPM, UMT, VAN AARSEN…).
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

TOTAL CERAN XM 220 Moly

Extreme-pressure calcium sulfonate complex grease containing 5% of MoS2.

Applications CERAN XM 220 Moly

• CERAN XM 220 Moly is a mineral oil , heavy duty, extreme pressure grease containing 5% of MoS2.
• CERAN XM 220 Moly is designed for mining applications in temperate environments.
• CERAN XM 220 Moly is recommended for the lubrification of slow moving bearings and loaded rolling element bearings subject to shock loads and high temperatures
• CERAN XM 220 Moly is suitable for the lubrication of all kinds of components subject to high loads, shocks, working in conditions where the grease is in frequent contact with water (even sea water due to enhanced antirust performances).
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges

Your advantage! Price of TOTAL CERAN XM 220 Moly drops automatically in larger quantities.

Total Ceran XM 720

Extreme-pressure water resistant high viscosity calcium sulfonate complex grease

Applications Total Ceran XM 720

• CERAN XM 720 is a heavy duty extreme pressure grease, specially designed for the lubrication of slow moving industrial bearings working under high temperatures and high loads in the steel industry./span>
• CERAN XM 720 is also suitable as EP multi purpose grease, in various other slow moving industrial applications where water is in frequent contact with the grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.