Shell Mysella S5 N 40 in 1000 L

Shell Mysella S5 N 40 Main Applications

• Spark-ignited gas engines fuelled by natural gas, especially those creating high oil stress.
• May also be used for landfill and biogases
  
  

Shell Mysella S5 N 40 Performance, Features & Benefits:

• + Extended oil life
• + Engine protection
• + System efficiency
  
  

Performance, Features & Benefits of Shell Mysella S5 N 40

+ Extended oil life

Significantly prolongs oil life relative to previous generation gas engine oils by resisting oxidation and nitration, viscosity increase and the formation of harmful acids, especially in demanding cogeneration (CHP) applications. (When used with landfill or biogases, oil life will be dependent on the level of contaminants in the gas.)

+ Engine protection

Shell Mysella S5 N offers excellent control of deposits and piston cleanliness in advanced engine designs. Shell Mysella S5 N is formulated with low ash and low phosphorus offering extended life to valves and spark plugs and full compatibility with emission catalysts

+ System efficiency

Shell Mysella S5 N is designed to help prevent knocking and thereby enable engines to be run at full load and optimum efficiency and its viscosity control helps to minimise engine friction losses. Shell Mysella S5 N helps to provide excellent cleanliness for the heat recovery boilers, turbochargers and intercoolers thus allow total system to operate with consistent performance and efficiency over time.

Specifications, Approvals & Recommendations Shell Mysella S5 N 40

Shell Mysella S5 N is suitable in engine types where a "low ash" oil is required.

Shell Mysella S5 N is approved by:

• Cummins QSV 81G/91G, QSK 60G
• GE Jenbacher Series 2,3, 4 and CAT, Series 6 all versions Fuel Class A and CAT, Series 4 ( from version C) Fuel Class B and C, Series 6 ( from version F) Fuel Class B and C
• Guascor FGLD, SFGLD
• MAN D&T Medium Speed Engines for Gas Operation
• MAN T&B M3271-2
• MTU Series 4000 L61, L62, L63, L64 and L32/L33
• MWM gas engines – TR 2105
• Caterpillar CG132, CG170, CG260 – TR 2105
• MAK GCM 34 Category 1
• Rolls Royce KG-1, KG-2, KG-3, KG-4, BV-G, CR-G
• Perkins 4000 series
• Wartsila W 34SG, W 50SG, W 20DF, W 32DF, W 34DF, W 50DF, W25SG, W28SG, W 175SG, W 220SG
• Waukesha Cogen and 220 GL (Pipeline Quality Natural Gas)

If you have any questions, please contact OlieOnline Technical Helpdesk

Health, Safety & Environment of Shell Mysella S5 N 40

Health and Safety

Shell Mysella S5 N 40 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/

Protect the Environment

Take used Shell Mysella S5 N 40 to an authorised collection point. Do not discharge into drains, soil or water.
 

Typical Physical Characteristics of Shell Mysella S5 N 40