Shell Spirax S6 ATF ZM

Shell Spirax S6 ATF ZM Main Applications

• Heavy duty automatic transmissions
• Shell Spirax S6 ATF ZM can also be used in all ZF-Ecomat - and ZF-Ecolife transmissions, and where retarders are used.
  
  

Shell Spirax S6 ATF ZM Performance, Features & Benefits:

• + Exclusive technology
• + Maximum oil drain interval potential
• + Extremely low temperature fluidity
• + Shift comfort and maintenance costs

Performance, Features & Benefits of Shell Spirax S6 ATF ZM

+ Exclusive technology

Shell Spirax S6 ATF ZM has been developed in conjunction with ZF. It uses synthetic base oils and exclusive additive technology providing for the ultimate in transmission performance.

+ Maximum oil drain interval potential

This technology is developed specifically for ZF-Ecomat – and ZF-Ecolife transmission for the longest oil drain intervals under all operating conditions. Changing from mineral or semi-synthetic oils to Spirax S6 ATF ZM will require shorter interim oil drain intervals. Please consult the ZF TE-ML 14 specification manual table 2 (version 2201- 2003) for complete details

+ Extremely low temperature fluidity

The physical characteristics provided by the additive technology and synthetic base oils allows for extremely low temperature fluidity, further protecting the transmission components from premature wear under extreme operating conditions.

+ Shift comfort and maintenance costs

The combination of these features and benefits translate into smooth shifting comfort and lower maintenance cost due to extended drain intervals and transmission component life.

Specifications, Approvals & Recommendations Shell Spirax S6 ATF ZM

• ZF TE-ML 04D, 14E, 16N, 20F, 25F
• MAN 339 Type Z13 (ZF-Ecolife 240.000 - 120.000 km depending on working temperature)
• MAN 339 Type Z4 (ZF-Ecomat 150.000 km)

If you have any questions, please contact OlieOnline Technical Helpdesk

Health, Safety & Environment of Shell Spirax S6 ATF ZM

Health and Safety

Shell Spirax S6 ATF ZM is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/

Protect the Environment

Take used Shell Spirax S6 ATF ZM to an authorised collection point. Do not discharge into drains, soil or water.
 

Typical Physical Characteristics of Shell Spirax S6 ATF ZM