Buy Lubricants — mineral, synthetic, dry & adhesive

Klüber Summit PS 300

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 300

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

Shell Gadus S4 V45AC 00/000 Previous Name: Retinax Grease CSZ, Shell Ossagol V

Advanced Multipurpose Grease

Shell Gadus S4 V45AC 00/000 main applications:

• Centralised chassis lubrication systems on trucks and buses or other “one-shot” systems.
• Pneumatic tools.

Shell Gadus S4 V45AC Grease is a fluid grease for use in centralised lubrication systems. This grease is based on highly refined mineral as well as selected synthetic base oils, extreme-pressure and other carefully selected additives to provide excellent protection in all conditions.

Please note!! Price of Shell Gadus S4 V45AC 00/000 drops automatically in larger quantities.

Klüber Klüberbio AG 39-602

Environmentally acceptable adhesive lubricant for open gears and steel cables

Application Klüber Klüberbio AG 39-602

Klüberbio AG 39-602 was developed for the lubrication of open pinion gears on winches and jack-up platforms, as well as steel cables in contact with water. The product can also be used in other maritime applications that require lubricants to have good water washout resistance, very good anti-corrosion resistance and/or good load-carrying capacity such as with low-speed plain bearings, guide rails and open winch gears.

Mobil Univis HVI 13

Hydraulic Oils

Application Mobil Univis HVI 13

Hydraulic systems critical to uniform hydraulic oil viscosity over a wide temperature range. Hydrostatic transmissions and dash pots. They can also be used in fine instruments and other mechanisms where power input is limited and increases in torque due to the lubricant thickening cannot be tolerated. To reduce deposit formation in equipment where close clearance servo-valves are used. Systems where cold start-up and high operating temperatures are typical. Systems requiring a high degree of load-carrying capability and anti-wear protection. Applications where rust and corrosion protection are an asset such as systems where small amounts of water are unavoidable

Castrol Magna SW D 32 slideway oil

(formerly Magnaglide D 32)

Examples of application of Castrol Magna SW D 32 slideway oilare:

• + Exceptional resistance to stick-slip, so higher quality of production
• + Very good demulsifying property - prevents emulsion on the plastic pipes and thus avoids wear and downtime for repair. The oil can easily be removed from emulsions, which can significantly extend their tool life.
• + Protects metals from corrosion.
• + Excellent wetting which reduces the wear and tear on the track

Shell Spirax S6 GXME 75W-80 Previous Name: Spirax GSX 75W-80

Premium, Synthetic Technology, Fuel Economy Manual Transmission and Gearbox Oil

Shell Spirax S6 GXME 75W-80 main applications:

• Automotive transmissions
• Synchromesh gearboxes, including those with integrated retarders, and medium loaded axle drives where mineral or synthetic gear oils are required.
  
  

Shell Spirax S6 GXME 75W-80 is a unique fuel-efficient, long-life gear oil designed to give the ultimate in performance and protection to meet the requirements of current and future heavy duty gearboxes. Specially formulated fully synthetic base oils plus a unique new additive technology give improved lubrication and longer life for your equipment.

Please note!! Price of Shell Spirax S6 GXME 75W-80 drops automatically in larger quantities.

CASTROL Hyspin ZZ 46

Anti-wear Hydraulic Oil

Application CASTROL Hyspin ZZ 46

The Hyspin ZZ range are formulated for applications requiring anti-wear and superior oxidation performance and are particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered. They are formulated for use in severely stressed systems in which high levels of anti-wear performance and/or ultra fine filtration are required. They have been proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment where the application leads to rapid breakdown of more conventional products. The range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin ZZ is classified as follows:

• DIN 51502 classification - HLP
• ISO 6743/4 - Hydraulic Oils Type HM

Hyspin ZZ grades meet the requirements (for appropriate viscosity grade) of:

• DIN 51524 Part 2
• Cincinnati Lamb (Milacron) P 68-69-70
• Denison (Parker Hannafin) HF-0
• US Steel 126 & 127
• Eaton (formerly Vickers) I-286-S & M-2950-S
• Bosch Rexroth RE90220

Your advantage! Price of CASTROL Hyspin ZZ 46 drops automatically in larger quantities.

TOTAL EQUIVIS XV 32

Very high viscosity index anti-wear hydraulic oils with high shear resistance.

Applications TOTAL EQUIVIS XV 32

• Equivis XV is a range of anti-wear hydraulic fluids recommended for all kind of hydraulic circuits operating within a very wide temperature range.
• Their excellent viscosimetric properties and their high shear resistance make the oils especially suitable for the use in mobile machines hydraulic systems intended for cold regions or which have to work in low temperature environments such as cold stores.

Your advantage! Price of TOTAL EQUIVIS XV 32 drops automatically in larger quantities.

TOTAL CERAN XS 80

Very low temperature synthetic calcium sulfonate complex grease - Extreme-pressure

Applications CERAN XS 80

• CERAN XS 80 is a synthetic heavy duty extreme pressure grease, specially designed for applications working under very low temperatures conditions
• CERAN XS 80 is pre-eminently suitable for lubrication of industrial, and ‘heavy duty’ off-road applications working in very low temperature environments.
• CERAN XS 80 is also used as a protection grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

Your advantage! Price of TOTAL CERAN XS 80 drops automatically in larger quantities.

CASTROL SPHEEROL LC

Long-term Grease

Application CASTROL SPHEEROL LC

Due to its high load carrying capacity and its water resistance Spheerol LZ is suited for the universal use in building site operations and in all transport devices. In addition it can be used in machines of the agricultural and forestry sector and also for demanding grease lubrication points in industrial gearboxes. Spheerol LZ is particularly suited for highly loaded rolling and plain bearings in a wet and dusty environment (e.g. universal joints, wheel hubs, sprockets, steering racks, etc.). The temperature range for this grease lies between - 20 °C and + 120 °C (for a short time even 130°C).

Your advantage! Price of CASTROL SPHEEROL LZ drops automatically in larger quantities.

Q8 Holbein Bio Plus 46 previously Q8 Holbein Eco 46

Applications Q8 Holbein Bio Plus 46

Hydraulic systems used in sensitive area’s for which environmentally friendly fluids are recommended.

Q8 Holbein HP SE BIO 46

Eco-friendly saturated synthetic ester-based hydraulic oil

Applications Q8 Holbein HP SE BIO 46

Q8 Holbein HP SE Bio 46 is perfect for applications in rough hydraulic systems in environmental sensitive area’s and all temperatures like agriculture, forestry, water works, marine and construction.

Your advantage! Price of Q8 Holbein HP SE BIO 46 drops automatically in larger quantities.

Total Ceran HV

Extreme-pressure water resistant high temperature calcium sulfonate complex grease.

Applications Total Ceran HV

• CERAN HV is a heavy duty extreme pressure grease, pre-eminently designed for the lubrication of industrial bearings working under high temperatures and high loads in the steel industry.
• CERAN HV is also suitable as EP multi purpose grease, in various other industrial applications where water is in frequent contact with the grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

Solvent based degreaser previously Houghton Callina 2306 & 2201

Properties of Houghto-Clean 510

Houghto-Clean 510 is an extremely versatile slow evaporating solvent cleaner.
 

Application of Houghto-Clean 510

Houghto-Clean 510 has been formulated for manual and and immersion cleaning applications as an alternative to to halogenated and other user and environmentally and unacceptable solvent cleaners.

Houhto-Clean 510 has been formulated has to remove low viscosity neat oils, greases, waxes and similar type soils from ferrous and non-ferrous metals, solvent resistant composites plastics and elastomers.

Degreasing of parts before assembly or welding is not necessary. Cleaned surfaces are left with a virtually imperceptible light coating which can provide temporary corrosion pretection of ferrous metals.

Shell Spirax S6 TXME Previous Name: Donax TDS

Synthetic Technology, SAE 10W-30, Multi-functional Tractor Oil

Shell Spirax S6 TXME main applications:

• Spirax S6 TXME will provide excellent performance in all agricultural tractors and off-road equipment specifying a UTTO (Universal Tractor Transmission Oil).
  
• Spirax S6 TXME has been tested and approved by a wide range of equipment manufacturers, and evaluated against the latest requirements of leading tractor and transmission manufacturers including John Deere, Massey Ferguson, Ford New Holland and ZF. 
• Spirax S6 TXME is specifically designed for those applications where heavy duty sustained operation has driven up oil temperatures and necessitated higher load-carrying capacity.

Spirax S6 TXME is the latest technology “Universal Tractor Transmission Oil” (UTTO) designed to provide a superior lubrication in transmissions, hydraulic systems, oil immersed brakes and other ancillary systems fitted to agricultural tractors and off-road equipment. Spirax S6 TXME, combining Shell XHVI synthetic base fluid with the newest additive technology, is particularly suitable for heavy-duty applications running in sustained high heat operating conditions.

Please note!! Price of Shell Spirax S6 TXME drops automatically in larger quantities.

CASTROL Aircol PD 100

Rotary Screw Compressor Lubricant

Application CASTROL Aircol PD 100

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

TOTAL EQUIVIS XLT 22

Ashless mineral Hydraulic fluid with a very high viscosity index.

Applications TOTAL EQUIVIS XLT 22

• EQUIVIS XLT is an hydraulic fluid designed for outdoor equipments operating under extremely low temperatures.
• The very high viscosity index of EQUIVIS XLT extends the temperature operating window of the hydraulic systems.

Your advantage! Price of TOTAL EQUIVIS XLT 22 drops automatically in larger quantities.

CASTROL Transmax Transaxle 75W-90 previously Syntrans Transaxle 75W-90

Manual Transmission Fluid - Transaxle

Houghton Macron EDM 110 Neat Oil for Spark Erosion 

MACRON EDM 110 is based on aliphatic hydrocarbons with very low content of aromatics for improved working conditions. High dielectric strength and good flushing properties contribute to a high removal capacity.

Castrol Vecton Long Drain 10W-40 E6/E9

Helps maximise performance

Application Castrol Vecton Long Drain 10W-40 E6/E9

Castrol Vecton Long Drain 10W-40 E6/E9 is designed for extended drain in the latest Euro 6 diesel engines. It can also be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Your advantage! Price of Castrol Vecton Long Drain 10W-40 E6/E9 drops automatically in larger quantities.