Lubricants

Total Biomerkan RS

Biodegradable water resistant calcium grease.

Applications Total Biomerkan RS

• BioMERKAN RS is pre-eminently designed for the lubrication of slow rotating slide bearings and articulations used in marine applications such as stern tubes, and ‘industrial’ applications such as conveyor belts
• BioMERKAN RS has been developed for loss lubrication in environmental sensitive areas, is also suitable as a non “EP” general purpose grease in a wide range of ‘outdoor’ applications where water is in frequent contact with the grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

TITAN UTTO TO-4 SAE 10W

Super High Performance multifunctional transmission lubricant for construction machinery

TITAN UTTO TO-4 SAE 10W field of applications:

TITAN UTTO TO-4 SAE 10W can be used in power-shift transmissions, gearboxes, final drives and hydraulic systems, where the manufacturer dictates the use of CATERPILLAR TO-4 oil in the viscosity grade of SAE 10W

Please note!! Price of TITAN UTTO TO-4 SAE 10W drops automatically in larger quantities.

CASTROL SPHEEROL EPL 3

Bearing grease

Application CASTROL SPHEEROL EPL 3

The Castrol Spheerol EPL 3 comprises general purpose greases designed for plant wide lubrication. The range extends from a Castrol Spheerol EPL 3 for general purpose bearing lubrication to a NLGI 00 (see separate data sheet) semi-fluid grease suitable for centralised lubrication systems and grease filled gearboxes.

Castrol Spheerol EPL 3 greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The stiffer consistency afforded by a Castrol Spheerol EPL 3 grade makes this product particularly suitable for the lubrication of bearings that are vertically mounted, or components exposed to a high degree of vibration. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 3 drops automatically in larger quantities.

Previously: Shell Donax TCS 10W-40

High performance synthetic oil for transmissions of earthmoving and agricultural machinery.

Shell Spirax S6 CXME 10W-40 is designed to provide operators with carefree operation and maximum reliability over the life of their equipment. Spirax S6 CXME 10W-40 meets the high demands of Modern Transmissions, Differential, End Drives, Wet Brakes and hydraulic systems of heavy-duty off-highway materials (earthmoving, road construction, construction, mining, quarries ....).

Applications

Shell Spirax S6 CXME 10W-40 is recommended for use in heavy-duty off-road machines from leading manufacturers including, but not limited to, Caterpillar and Komatsu, and transmissions produced by Eaton, ZF, & nbsp;& middot; Dana, Rockwell among others:

• Powershift Transfers and Intermediate Differences
• End drives, differentiators and reducers
• Wet Braking
• Hydraulic systems and hydrostatic transmissions

PLANTO TAC 68

PLANTO TAC 68 field of applications:

PLANTO TAC 68 was developed specially for all lubricated saw chains which are used in the toughest conditions in environmentally sensitive areas such as protected water zones, forests, tree nurseries, etc.

CASSIDA GREASE EPS 2

Extreme pressure grease for food & beverage processing equipment

Cassida Grease EPS 2 main applications:

• Rolling element and plain bearings
• Joints, linkages and slides
• Recommended for a wide range of applications including; clay and roller element bearings.

Cassida Grease EPS 2 may also be used as protective anti-rust films and as release agents on gaskets and seals of tank closures.

Cassida Grease EPS 2 are high performance extreme pressure lubricants specially developed for the grease lubrication of machinery in the food and beverage processing and packaging industry. Cassida Grease EPS 2 are based on an aluminium complex thickener, synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

RENOLIN MR 15 VG 46

Special lubricating and hydraulic fluids with excellent corrosion protection

RENOLIN MR 15 VG 46 field of applications:

RENOLIN MR are lubricating oils for circulation and bearing lubrication, superbly suited for applications in mobile and stationary hydraulic systems where the use of a detergent / dispersant hydraulic oil with low friction coefficients, good stick-slip behaviour and excellent corrosion protection properties is required. RENOLIN MR is also suited for use as high-speed spindle oil, break-in oil, and corrosion protection oil.

Please note!! Price of RENOLIN MR 15 VG 46 drops automatically in larger quantities.

Total Nevastane EP 220

Gear oils, suitable for incidental food contact

Applications Total Nevastane EP 220

• NEVASTANE EP formulation is based on white mineral oils, synthetic oils, and high performances additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.
• NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
• NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.

CASTROL Vecton Fuel Saver 5W-30 E6/E9

Helps Maximise Performance

Application CASTROL Vecton Fuel Saver 5W-30 E6/E9

Castrol Vecton Fuel Saver 5W-30 E6/E9 is designed for better fuel economy in the latest Euro 6 diesel engines. It is also suitable for extended service intervals as recommended by many European engine manufacturers, including MercedesBenz and Volvo, and is approved for use in MAN Euro 6 engines. It can be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Your advantage! Price of CASTROL Vecton Fuel Saver 5W-30 E6/E9 drops automatically in larger quantities.

Cassida Grease RLS 2

Grease for food & beverage processing equipment

Cassida Grease RLS 2 main applications:

• Rolling element and plain bearings
• Joints and linkages open to the atmosphere
• Automatic, centralised lubrication systems
• CASSIDA GREASE RLS 1 is recommended for Lincoln centralised lubrication systems

Cassida Grease RLS 2 is also available in spray form, FLT product code 7547.

Cassida Grease RLS 2 are specially developed for the grease lubrication of machinery in the food and beverage processing and packaging industry. They are based on an aluminium complex thickener, synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of Cassida Grease RLS 2 drops automatically in larger quantities.

Houghton Garia 601 M-22

It is based on hydro treated mineral oils with a low aromatic content.It's formulated to a combination of polar, extreme pressure and anti-wear additives.

Properties

Its composition gives the oil high load carrying properties. Its high additive content and controlled extreme pressure properties allow high rates of metal removal, which results in reduced machining costs.

The oil provides good tool life and excellent surface finish of the machined work pieces. Efficient anti mist additives reduce mist in the air.

Due to its active sulphur content, the oil may discolor yellow metals.

Application

Garia 601 M-22 is recommended for machining high alloyed steels, stainless, heat resistant or austenitic steels and aluminum or magnesium alloys. The oil gives excellent results with many difficult operations such as broaching, deep-hole drilling, tapping, shaping or shaving of gears.

Houghton Rust Veto DW 162 (formerly Shell Ensis DW 162)

Short-term rust inhibitor with dewatering capacity for short protection duration

Rust Veto DW 162 is a rust inhibitor with a short protective duration suitable for protection during storage or use of metal surfaces that are susceptible to corrosion. Rust Veto DW 162 is a solvent-based anti-corrosion agent with water-displacing properties. It protects metal surfaces against the harmful effects of moisture, air, detergents and other contaminants. Rust Veto DW 162 quickly expels water, moisture and other contaminants from the surfaces to be protected.

Main features of Houghton Rust Veto DW 162 (formerly Shell Ensis DW 162) are:

• + Protection duration: Indoor: 2 weeks to 1 month and Outdoor (under roof): not recommended
• + Easy to remove with alkaline or solvent-based cleaners
• + Leaves practically no film
• + Short drying time
   

Please note ! Price Houghton Rust Veto DW 162 drops automatically with larger quantities.

FUCHS Cassida Chain Oil 320 Spray

Synthetic chain lubricant in spray form for food and beverage processing equipment

Application FUCHS Cassida Chain Oil 320 Spray

Drive and transport chains in the food industry. Slideways, levers, joints and bolts, ropes, spindles and guide pulleys. Also intended for use in equipment manufacturing food packaging

Mobilux EP 3

Universally applicable industrial grease

Mobilux EP 3

The most important applications of Mobilux EP 3 are:

• + Mobilux EP 3 is universally applicable fats.
• + The recommended use temperature is between -20 C to + 130 C.

Mobilux EP 3 are high-quality, universally applicable industrial lubricants. These lithium-hydroxystearate fats are formulated for high protection against wear, rust, corrosion and the washing away effect of water. Mobilux EP 3 greases are recommended for almost all common industrial applications, including heavily loaded applications with shock loads. The lubricating greases offer very good protection against rust, corrosion and water, making them suitable for humid operating conditions.

Total Nevastane XS 320

Food grade extreme pressure calcium sulfonate complex grease.

Applications Total Nevastane XS 320

• NEVASTANE XS 320 is an extreme pressure grease dedicated to the lubrication in food industry under very severe conditions: water, high load, high temperature, dust
• NEVASTANE XS 320 is recommended for the lubrication of pelleting presses (KAHL, Promill Stolz, CPM , UMT, Van Aarsen…) in feed and sugar industries

Castrol Transmax Universal 75W-90 previously Syntrax Universal 75W-90

Universal Fluid for manual transmissions and axles

Mobil Pegasus™ 710

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus™ 710 are:

• + Spark ignited four-cycle gas engines with very low oil consumption
• + Engines experiencing valve train wear and corrosion
• + Engines operating on fuel containing low levels of sulphur and chlorine compounds
• + Reciprocating compressor cylinders compressing natural gas
• + High output or ambient rated engines operating at or in excess of rated capacity under high temperatures

Pay attention! Price of Mobil Pegasus™ 710 drops automatically with higher volumes.

TITAN ATF 4000

Ultra High Performance ATF for use in automatic transmissions as well as other ATF applications. Licensed according to DEXRON III (H). Improved low-temperature shifting compared to DEXRON II.

TITAN ATF 4000 field of applications:

TITAN ATF 4000 is miscible and compatible with conventional branded gear oils. However, mixing with other gear oils should be avoided in order to fully utilize the product’s benefits. A complete oil change is recommended when converting to TITAN ATF 4000. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.

Please note!! Price of TITAN ATF 4000 drops automatically in larger quantities.

Houghton Garia 405 M-32

Garia 405 M-32 is a neat cutting oil. It is commonly used for machining higher alloyed steels, aluminum and magnesium alloys.

Properties

Garia 405 M-32 is a chlorine free product. It is free of heavy metals and has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and antiwear additives which give the oil high load carrying properties.

Due to its active sulphur content, the oil may discolor yellow metals.

Applications

Garia 405 M-32 is recommended for general machining operations such as turning, drilling and gear hobbing on steel of low to medium tensile strength, aluminum and magnesium alloys. It is also suitable for grinding where higher viscosity is required, e.g. thread grinding.

Houghton Ensis DW 1262 (formerly Shell Ensis RX)

Ensis DW1262 is a rust inhibitor with drainage properties for medium protection

Ensis DW 1262 is a rust inhibitor with a medium-term protection (up to 12 months in storage). Ensis DW 1262 is a solvent-based anti-rust agent with de-watering properties that, after evaporation of the solvent, leaves a temporary waxy film on the metal surfaces to be protected. Ensis DW 1262 protects metal parts in an efficient way against the harmful effects of humidity, air, detergents and other contaminants. Ensis DW 1262 can be applied by means of dipping or spraying.

Advantages of Houghton Ensis DW 1262 (formerly Shell Ensis DW 1262) are:

• + Protection duration: Indoor: 
• 12 months 
• Covered outside: 3 months
• + Easy to remove with alkaline or solvent-based cleaners
• + Excellent demulsifying properties
• + Short drying time
• + It resists cracking & peeling