Synthetic Gear Oil DIN CLP

Q8 Schumann G 150

Applications Q8 Schumann G 150

Industrial gear oil based on high quality synthetic PAO base oil

Your advantage! Price of Q8 Schumann G 150 drops automatically in larger quantities.

Shell Omala S4 GXV 150 previously S4 GX 150

Advanced Synthetic Industrial Gear Oil

Shell Omala S4 GXV 150 main applications:

• Manufacturing and industrial gear systems
• Gear motor systems and other inaccessible installations
• Excellent compatibility with seals, paints and sealants
• Enclosed industrial gear systems

Shell Omala S4 GXV 150 is an advanced synthetic heavy duty industrial gear oil, approved by Siemens AG, offering outstanding lubrication performance under severe operating conditions, including reduced friction, long service life, high resistance to micro-pitting for optimal gear protection and superb compatibility with seals.

Pay attention! Price of Shell Omala S4 GXV 150 drops automatically in larger quantities.

TOTAL CARTER SH 150

Synthetic oil (PAO) for enclosed gears.

Applications TOTAL CARTER SH 150

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.

• bevel and spur gears
• Heavily loaded bearings and gear couplings.

Your advantage! Price of TOTAL CARTER SH 150 drops automatically in larger quantities.

Mobil SHC 624

Exceptional Performance Gear and Bearing Oils

Application Mobil SHC 624

While Mobil SHC 600 Series are generally compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of Mobil SHC 600 Series products, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits. Mobil SHC 600 Series oils are compatible with most NBR, FKM and most other elastomeric seal materials that are used with mineral oils. There is the potential for substantial variations in the elastomers. For best results, consult your equipment supplier, seal manufacturer, or your local company representative to verify compatibility. Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. They are particularly effective in applications where the maintenance costs of component replacement, system cleaning and lubricant changes are high. Specific applications require selection of the appropriate viscosity grade and include: Filled for life gearboxes, especially high ratio/ low-efficiency worm gears. Remotely located gearboxes, where oil change-out is difficult. Low temperature applications, such as ski lifts where seasonal oil changes can be avoided. Mixer roll bearings and roll neck bearings where high temperatures are encountered. Plastic calenders. Severe centrifuge applications, including marine centrifuges. Railroad A/C Traction Drives. Mobil SHC 626, 627, 629 and 630 are suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry. Mobil SHC 629, 630, 632, 634, 636, and 639 are approved by Siemens AG for use in Flender gearboxes

Mobil SHC 524

Hydraulic Oils

Mobil SHC™ 524 oils are exceptional performance hydraulic oils formulated from synthesised, wax-free hydrocarbon base fluids combined with a carefully engineered super-stabilised additive system.

Most important applications of Mobil SHC 524 are:

• + Hydraulic systems prone to deposit build-up such as sophisticated Numerically Controlled (NC) machines, particularly where close clearance servo-valves are used
• + Systems employing multi-metal component designs
• + High pressure vane, piston and gear pumps
• + Systems where cold start-up and / or very high operating temperatures are typical
• + Where small amounts of water are unavoidable
• + In systems containing gears and bearings
• + Systems requiring a high degree of load-carrying capability and anti-wear protection
• + Applications where thin oil-film corrosion protection is an asset such as in systems containing moisture
   

Pay attention! Price of Mobil SHC 524 drops automatically with higher volumes.

Mobil SHC 632

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 632 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 632 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 632 drops automatically with higher volumes.

Mobil SHC 629

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 629 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 629 is suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
   
• + Mobil SHC 629 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 629 drops automatically with higher volumes.

CASTROL ALPHASYN T 150

Synthetic Gear Oil

Application CASTROL ALPHASYN T 150

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 150 drops automatically in larger quantities.

Synthetic industrial gear oil 150 (ISO VG)

Mobil SHC Gear 150 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 150 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 150 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 150 drops automatically with higher volumes.