Your sector

Castrol Magnatec 5W-30 A5

Properties

Castrol Magnatec 5W-30 A5 is suitable for use in automotive petrol and diesel engines where the manufacturer recommends ACEA A5/B5, A1/B1 or API SN/CF ILSAC GF-4 5W-30 Lubricant.

Up to 75% of engine wear happens while your engine warms up. When the engine stops oil drains off critical engine parts, however Castrol Magnatec’s intelligent molecules don’t. They cling to the engine like a magnet providing an extra layer of protection.

Specifications/ Approvals

Castrol Magnatec 5W-30 A5 has been developed for use in Ford vehicles that require a 5W-30 lubricant that meets Ford WSS-M2C913-D, Ford WSS-M2C913-C, WSS-M2C913-B or WSS-M2C913-A.

Shell Rimula R5 LE 10W-40

Synthetic Technology Heavy Duty Diesel Engine Oil

Shell Rimula R5 LE 10W-40 main applications:

• European heavy duty engines
  Shell Rimula R5 LE 10W-40 provides protection and performance in modern high power heavy-duty diesel engines from leading European engine makers such as Mercedes-Benz and MAN and where oils meeting ACEA E9 are called for.
• Low emission engine use
  Shell Rimula R5 LE 10W40 meets the requirements of the major European and North American engine manufacturers for low emission applications.

Shell Rimula R5 LE 10W40 oils feature ""Low-SAPS"" additive technology while delivering energy savings. Protective power is enhanced through the use of synthetic base oil technology to deliver fuel economy performance with no compromise in durability.

Please note!! Price of Shell Rimula R5 LE 10W-40 drops automatically in larger quantities.

Mobil DTE Light

High-quality circulation lubricants

Applications of Mobil DTE Light are:

• + Recirculating lubrication systems for steam turbines on land and shipping, water turbines and some gas turbines, including pumps, valves and other auxiliary equipment
• + Continuous use in flat and roller bearings and in straight gears
• + Turbines with immersion, oil bath and ring lubrication systems and other mechanical means
• + Moly-loaded hydraulic pumps
• + Compressor and vacuum pumps for air, natural gas and inert gas when the temperatures on the pressure side 150& deg; C not exceed
  
  

The Mobil DTE Light is a premium product for circulation lubrication. They have been specially developed for steam and hydroturbation systems, but also for other systems that require a long lifetime of the lubricant. These products are formulated with very refined bases and an additive system, the combination of which is high. of chemical and thermal stability. In addition, they have a fast water wash capacity and high protection against emulsification.

Your advantage: Price of Mobil DTE Light drops automatically with higher volumes.

CASTROL ALPHA SP 220

Gear oils DIN CLP 220

Application CASTROL ALPHA SP 220

The Alpha SP 220 is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions. The castrol Alpha SP 220 additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP 220 is compatible with the most common types of seal materials.

Alpha SP 220 is classified as follows: DIN Classification is CLP 220

Your advantage! Price of CASTROL ALPHA SP 220 drops automatically in larger quantities.

Mobil DTE Heavy-Medium

High quality circulation lubricants

Applications of Mobil DTE Heavy-Medium are:

• + Recirculating lubrication systems for land and marine steam turbines, water turbines and some gas turbines, including pumps, valves and other auxiliary equipment
• + Continuous use in plain and roller bearings and in spur gears
• + Turbines with immersion, oil bath and ring lubrication systems and other mechanical means
• + Moly-loaded hydraulic pumps
• + Compressor and vacuum pumps for air, natural gas and inert gas when the pressure side temperatures do not exceed 150°C
  
  

The Mobil DTE Heavy-Medium is a premium product for circulation lubrication. They have been specially developed for steam and hydroturbation systems, as well as for other systems that require a long lubricant life. These products are formulated with highly refined bases and an additive system, the combination of which is high. of chemical and thermal stability. In addition, they have a fast Wasserab separating capacity and a high protection against emulsification.

TOTAL CARTER EP 68

Mineral oils for enclosed gears.

Applications TOTAL CARTER EP 68

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:

• bevel and spur gears
• bearings and gear couplings
• worm gears.

Your advantage! Price of TOTAL CARTER EP 68 drops automatically in larger quantities.

TOTAL CARTER EP 320

Mineral oils for enclosed gears.

Applications TOTAL CARTER EP 320

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:

• bevel and spur gears
• bearings and gear couplings
• worm gears.

Your advantage! Price of TOTAL CARTER EP 320 drops automatically in larger quantities.

TOTAL CARTER EP 460

Mineral oils for enclosed gears.

Applications TOTAL CARTER EP 460

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:

• bevel and spur gears
• bearings and gear couplings
• worm gears.

Your advantage! Price of TOTAL CARTER EP 460 drops automatically in larger quantities.

TOTAL AZOLLA ZS 150

Very high performance anti-wear hydraulic oils.

Applications TOTAL AZOLLA ZS 150

• Designed for use in all kind of hydraulic sytems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment.
• Also used in many other applications, where an universal high performance antiwear lubricant is the first choice : low charged gears, sliding and roller bearings, air compressors, servo-motors and control systems equipped with fine filtration systems.

Your advantage! Price of TOTAL AZOLLA ZS 150 drops automatically in larger quantities.

TOTAL AZOLLA ZS 100

Very high performance anti-wear hydraulic oils.

Applications TOTAL AZOLLA ZS 100

• Designed for use in all kind of hydraulic sytems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment.
• Also used in many other applications, where an universal high performance antiwear lubricant is the first choice : low charged gears, sliding and roller bearings, air compressors, servo-motors and control systems equipped with fine filtration systems.

Your advantage! Price of TOTAL AZOLLA ZS 100 drops automatically in larger quantities.

TOTAL EQUIVIS ZS 68

High viscosity index anti-wear hydraulic oils.

Applications TOTAL EQUIVIS ZS 68

• EQUIVIS ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature
• Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

Your advantage! Price of TOTAL EQUIVIS ZS 68 drops automatically in larger quantities.

TOTAL CERAN XM 220

Extreme-pressure water resistant high temperature “NEW GENERATION” calcium sulfonate complex grease.

Applications CERAN XM 220

• CERAN XM 220 is made of the NEW GENERATION calcium sulfonate complex soap designed by TOTAL Lubrifiants. This new soap has enhanced properties in terms of water resistance, load capacity, thermal resistance, anticorrosion properties while keeping a very high level of pumpability and ability to lubricate well in case of high speeds.
• CERAN XM 220 is suitable for the lubrication of all kinds of components subject to high loads, shocks, working in conditions where the grease is in frequent contact with water (even sea water due to enhanced antirust performances).
• CERAN XM 220 is suitable for the lubrication of continuous castings and rolling mills in steel plants, bearings in wet and dry (felt rolls) sections of paper mills and all industrial applications under severe conditions (wet, loaded, high temperature, dust,…)
• CERAN XM 220 is suitable for use in centralized greasing systems.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

Your advantage! Price of TOTAL CERAN XM 220 drops automatically in larger quantities.

Mobil Vactra No2

Slideway oil

The Mobil Vactra Oil Number 2 consists of high-quality guiding oil, specially formulated to meet the requirements of accuracy, separating capacity for aqueous coolants and protection of precision instruments.

Main applications of Mobil Vactra No2 are:

• + Mobil Vactra Oil Nr. 2 are recommended for horizontal guideways
• + Lubrication of ball screws, straight guides, spindle heads, transport screws
• + Applications where oil contamination of the aqueous refrigerant shortens the life of the refrigerant
• + Circulation lubrication on large machines and as moderately loaded hydraulic fluid.

Your advantage: Price Mobil Vactra No2 drops automatically with larger quantities.

Mobil Vactra No 4

Slideway oil

The Mobil Vactra Oil Number 4 consists of high-quality guiding oil, specially formulated to meet the requirements of accuracy, separating capacity for aqueous coolants and protection of precision instruments.

Main applications of Mobil Vactra No 4 are:

• + Mobil Vactra Oil No 4 are recommended for vertical guideways
• + Lubrication of ball screws, straight guides, spindle heads, transport screws
• + Applications where oil contamination of the aqueous refrigerant shortens the life of the refrigerant
• + Circulation lubrication on large machines and as moderately loaded hydraulic fluid.

Your advantage: Price Mobil Vactra No 4 drops automatically with larger quantities.

Mobil Vactra No 1

Horizontal Slideway oil

The Mobil Vactra Oil Number 1 consists of high-quality guiding oil, specially formulated to meet the requirements of accuracy, separating capacity for aqueous coolants and protection of precision instruments.

Main applications of Mobil Vactra No 1 are:

• + Mobil Vactra Oil No 1 are recommended for horizontal guideways
• + Lubrication of ball screws, straight guides, spindle heads, transport screws
• + Applications where oil contamination of the aqueous refrigerant shortens the life of the refrigerant
• + Circulation lubrication on large machines and as moderately loaded hydraulic fluid.

Your advantage: Price Mobil Vactra No 1 drops automatically with larger quantities.

Mobil Vactra No 3

Vertical Slideway oil

The Mobil Vactra Oil Number 3 consists of high-quality guiding oil, specially formulated to meet the requirements of accuracy, separating capacity for aqueous coolants and protection of precision instruments.

Main applications of Mobil Vactra No 3 are:

• + Mobil Vactra Oil No 3 are recommended for vertical guideways
• + Lubrication of ball screws, straight guides, spindle heads, transport screws
• + Applications where oil contamination of the aqueous refrigerant shortens the life of the refrigerant
• + Circulation lubrication on large machines and as moderately loaded hydraulic fluid.

Your advantage: Price Mobil Vactra No 3 drops automatically with larger quantities.

Mobil DTE 25 Ultra (previously DTE25)

Mobil Industrial Hydraulic Oils

Most important applications of Mobil DTE 25 Ultra are:

• + Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products
• + Hydraulic systems requiring a high load-carrying capability and anti-wear
• + protection, and when thin oil-film corrosion protection is an asset
• + Where small amounts of water are unavoidable
• + Systems containing gears and bearings
• + Machines employing a wide range of components using various metallurgy

CASTROL Transmax DEX-VI MER LV

Automatic Transmission Fluid

Application CASTROL Transmax DEX-VI MER LV

This product is additionally suitable for use in power steering systems where the use of any Dexron specification or Mercon LV fluid is permitted.

CASTROL ALPHA SP 460

Gear oils DIN CLP 460

Application CASTROL ALPHA SP 460

The Alpha SP 460 is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. Castrol Alpha SP 460 may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions.

The additives in Alpha SP 460 are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP 460 is compatible with the most common types of seal materials.

Alpha SP 460 is classified as follows: DIN Classification is CLP 460.

Your advantage! Price of CASTROL ALPHA SP 460 drops automatically in larger quantities.

CASTROL ALPHA SP 150 previously Energol GR XP 150

Gear oils DIN CLP 150

Application CASTROL ALPHA SP 150

The Alpha SP 150 is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions. The castrol Alpha SP 150 additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP 150 is compatible with the most common types of seal materials.

Alpha SP 150 is classified as follows: DIN Classification is CLP 150

Your advantage! Price of CASTROL ALPHA SP 150 drops automatically in larger quantities.