Your sector

CASTROL SPHEEROL EPL 1

Bearing grease

Application CASTROL SPHEEROL EPL 1

The Spheerol EPL 1 comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 1 drops automatically in larger quantities.

Q8 Axle Oil XG 80W-140

Synthetic SAE J2360 axle fluid

Applications Q8 Axle Oil XG 80W-140

Q8 Axle Oil XG 80W-140 is recommended for use in rear axles and final drive applications and is approved by Scania to use with extended drain intervals up to 180,000km. It meets the requirements of SAE J2360, top European OEMs and component manufacturers such as ZF.

Your advantage! Price of Q8 Axle Oil XG 80W-140 drops automatically in larger quantities.

TOTAL FINATUROL D

Very high performance vegetable oil for dough dividers and bread slicers

Applications TOTAL FINATUROL D

• FINATUROL D has been developed to ensure optimum performances of lubrication and to give maximum wear protection to the knives with an oil consumption as low as possible.
• FINATUROL D is used to prevent sticking and the development of varnishes on the surface of the knives.

View product data of Total Finaturol K 2

TOTAL BIOHYDRAN TMP 100

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 100

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 100 drops automatically in larger quantities.

Shell Spirax S6 ATF ZM Previous Name: Donax TZ

Premium Heavy Duty Transmission Oil for ZF Long Drain

Shell Spirax S6 ATF ZM main applications:

• Heavy duty automatic transmissions                                  Shell Spirax S6 ATF ZM can also be used in all ZF-Ecomat - and ZF-Ecolife transmissions, and where retarders are used.

Shell Spirax S6 ATF ZM Oil is a fully synthetic, premium quality, heavy-duty automatic transmission oil specifically designed in partnership with ZF as a lubricant for the newest generation of ZF-Ecomat - and ZFEcolife transmissions. Spirax S6 ATF ZM is the ultimate performance automatic transmission fluid allowing extended drain intervals even under the most severe conditions.

Please note!! Price of Shell Spirax S6 ATF ZM drops automatically in larger quantities.

Houghton Macron 400 M-32

Properties

Macron 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 400 M-32 is free from zinc, chlorine and active sulphur.

Applications

Macron 400 M-32 is a high performance cutting oil for operations on light and medium alloyed steels, aluminium and yellow metals.

Macron 400 M-32 has multipurpose oil characteristics for cutting and hydraulic oil HLP DIN 51524-2 and gear oil CLP DIN 51517-3.

It has a good de-aeration power, does not foam and is not aggressive for the paints on machine tools.

MACRON 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MACRON 400 M-32 is free from zinc, chlorine and active sulphur. 

Advantages:

• Increased productivity - reduced machine downtime.
• Reduced cost - long sump life.
• Secure handling - fulfills HLP 1 CLP standards.
• Secure handling - high EHS standard.

Q8 El Greco 150

Applications Q8 El Greco 150

Industrial gear drives

Windturbine gears.

Your advantage! Price of Q8 El Greco 150 drops automatically in larger quantities.

Q8 Schumann G 150

Applications Q8 Schumann G 150

Industrial gear oil based on high quality synthetic PAO base oil

Your advantage! Price of Q8 Schumann G 150 drops automatically in larger quantities.

Mobil Pegasus 805

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus 805 are:

• Caterpillar, Superior, Waukesha and other turbocharged, naturally aspirated, medium to high speed four-cycle engines requiring a low ash oil
• Engines experiencing valve face and seat wear
• Lean-burn and stoichiometric four-cycle engines
• Engines equipped with catalytic converters
• Applications using alternate fuels containing low levels of sulfur or chlorine
• In field gathering operations where sour gas (low levels of H2S) is used as fuel
  
  

Your advantage: Price of Mobil Pegasus 805 drops automatically with higher volumes.

CASTROL SPHEEROL EPL 00

Bearing grease

Application CASTROL SPHEEROL EPL 00

The Spheerol EPL 00 comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 00 drops automatically in larger quantities.

CASTROL VARIOCUT B 30

High performance neat cutting oil

Application CASTROL VARIOCUT B 30

Variocut B 30 is designed for arduous broaching of stainless steels and difficult to machine high tensile steel alloys. It is also suitable for gear hobbing, gear cutting and gear shaping. Variocut B 30 contains active sulphur and is not compatible with yellow metals.

Your advantage! Price of CASTROL VARIOCUT B 30 drops automatically in larger quantities.

Houghton Garia 405 M-22

Properties

GARIA 405 M-22 is based on hydro treated mineral oil with low aromatic content. A combination of polar. extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

GARIA 405 M-22 contains active sulphur and may discolour yellow metals.

The oil is zinc and chlorine free.

Applications

GARIA 405 M-22 is the universal oil for the gear shop. It shows excellent performance for the gear grinding as well as for gear hobbing and shaping operations.

GARIA 405 M-22 is used also for the machining of steel and cast iron on automatic turning lathes.

Approvals

Hofler and Klingelnberg.

Houghton Macron 2425 S-14

Properties

Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.

Applications

Macron 2425 S-14 is a high performance grinding oil, used for flute grinding on high-speed steel, and with ceramic and diamond or boron nitrite grinding wheels.

Macron 2425 S-14 can also be used for grinding spiral toothed bevel gears and flat or cylindrical grinding processes, on the complete range of steels and non-ferrous metals.

Approvals

Product is approved by Liebherr, Kapp, Niles, Junker, Hofler, Klingelnberg.

Q8 El Greco 320

Applications Q8 El Greco 320

Industrial gear drives

Windturbine gears.

Your advantage! Price of Q8 El Greco 320 drops automatically in larger quantities.

Q8 Schumann G 220

Applications Q8 Schumann G 220

Industrial gear oil based on high quality synthetic PAO base oil

Your advantage! Price of Q8 Schumann G 220 drops automatically in larger quantities.

Q8 Vermeer WDS 220

Paper machine circulating oil based on very high quality synthetic base oils (PAO)

Applications Q8 Vermeer WDS 220

Lubrication of industrial paper machine circulating systems for the wet- and dry-end. Q8 Vermeer WDS is formulated to meet the high demands of certain lubrication systems e.g. when steam pressures and bearing temperatures are high.

Your advantage! Price of Q8 Vermeer WDS 220 drops automatically in larger quantities.

Houghton Macron 205 M-8

Properties

Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 205 M-8 is zinc and sulphur free.

Applications

Macron 205 M-8 is a universal honing, superfinishing and grinding oil.

Typical application is in the bearing industry and electronic industry for fine machining of aluminium and yellow metals.

Macron  205 M-8 has higher viscosity compared to other typical honing oils.

Medium term rust preventive oil

Ensis RPO 1200 is a solvent free, oil-based temporary corrosion preventative for metal surfaces likely to corrode in storage or use Ensis RPO 1200 leaves a thin, self-healing, oily, protective film on surfaces requiring temporary protection. It is ideal for use on finished parts, subjected to indoor storage of up to twelve months.

Important properties of Houghton Ensis RPO 1200 (previous name Shell Ensis RPO 1200) are:

• + Indoor protection for 12 months
• + Outdoor covered protection for 3 months
• + No cleaning needed before parts assembling
• + Low volatility
• + High flashpoint

Houghton Garia 404 M-10

Properties

Garia 404 M-10 is a neat cutting oil for machining high alloyed steels, aluminum and magnesium alloys. Garia 404 M-10 is chlorine free, free of heavy metals and it has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and anti-wear additives which gives the oil high load carrying properties. Due to its active sulphur content, the oil may discolor yellow metals.

Applications

Garia 404 M-10 is recommended for:

Grinding

Deep-hole drilling

Taping or broaching of low to medium alloyed steels

Gear hobbing

Machining on automatic lathes

Garia 404 M-10 is used neat as supplied.

TOTAL CERAN GEP

Extreme-pressure water resistant high temperature calcium sulfonate complex grease with solid lubricants.

Applications TOTAL CERAN GEP

• CERAN GEP is pre-eminently designed for use on open gears of rotary drum drives, single and double pinion kiln and mill drives, working under severe circumstances.
• CERAN GEP is particularly adapted for the lubrication of sugar mills (plain bearings, pinions/open gears)
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump/spray system.

Your advantage! Price of TOTAL CERAN GEP drops automatically in larger quantities.