Klüber
-
Klüber Klüberlub 4 UH1-100 N
Klüber Klüberoil 4 UH1-100 N
Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries
Application Klüber Klüberoil 4 UH1-100 N
Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.
Learn More -
Klüber Klüberoil GEM 1-100 N
Klüber Klüberoil GEM 1-100 N
High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology
Application Klüber Klüberoil GEM 1-100 N
Klüberoil GEM 1 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.
Learn More -
Klüber Klüberoil YF 100
Klüber Klüberoil YF 100
High-temperature chain oil
Application Klüber Klüberoil YF 100
Klüberoil YF 100 is suitable for the lubrication of transport chains used in the food processing industry, e.g. plate carrier chains in bread baking ovens. It can also be used on drive and control chains in melting furnaces used in the metal industry and on other chains subject to high temperatures.
Learn More -
-
Klüber Klüberbio EG 2-100
Klüber Klüberbio EG 2-100
Environmentally compatible, synthetic high-performance gear oils
Application Klüber Klüberbio EG 2-100
Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.
Learn More -
Klüber Summit SH 100
Klüber Summit SH 100
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 100
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Learn More -
Klübersynth GEM 4-100 N
Klübersynth GEM 4-100 N
Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Application Klübersynth GEM 4-100 N
Klübersynth GEM 4 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klübersynth GEM 4 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps, especially in applications where the equipment is exposed to elevated temperatures or pronounced temperature fluctuations.
Learn More
Küber lubricants
High-performance Klüber oils and greases for optimal lubrication of assets. Resulting in higher reliability, less time spent on maintenance and lower lubricant consumption. With a lower cost to operate, fewer breakdowns, more performance, more output and a better result. Also food safe or biodegradable if required, with the official registrations and certifications.
What makes Klüber lubricants so good?
Klüber is the specialist for special greases and oils. I think there is no other brand with such a broad portfolio of lubricating greases as Klüber. Kluber's portfolio already includes more than 10,000 products. Therefore, you often see very high-quality and very specific products in their portfolio. The price of this specialist in lubricants is high, but fortunately very small packages are available.
My machine supplier prescribes Klüber lubricants. Should I use these?
Klüber has an extremely good relationship with these OEMs and has often looked very closely at the needs and requirements of these machine builders. Therefore, it is not always obvious to select a general product. In addition, warranty also plays an important role. If the consumption is not very high, we would save you the trouble of looking for an alternative.
Where can I buy Klüber oil in United Kingdom?
The easiest way is online! OlieOnline delivers Klüber oil and greases in the whole Benelux. They are specialised in business use, but the private individual can also buy directly from the wholesaler.
- Remove This Item Viscosity: 100 mm2/sec
- Category
-
- Klüberbio (2)
- Klüberoil (2)
- Klüberoil 4 UH1 (1)
- Klübersynth GEM (1)
- Klüber Summit (1)
- Viscosity
-
- 100 mm2/sec (7)
- 1000 mm2/sec (1)
- 100W (4)
- 150 mm2/sec (6)
- 1500 mm2/sec (2)
- 220 mm2/sec (7)
- 32 mm2/sec (2)
- 320 mm2/sec (5)
- 46 mm2/sec (5)
- 460 mm2/sec (10)
- 68 mm2/sec (17)
- 680 mm2/sec (1)
- NLGI 0 (2)
- NLGI 00 (1)
- NLGI 1 (3)
- NLGI 2 (6)
- Brand
-
- Klüber (7)
| 9+ | Our customers value us  |
 Ian Adair |
"We like your site, it shows that you are experts in lubricants!" |
 Cris Scullion |
"You deliver quicker than our previous UK supplier!" |
| Stuart Wyatt |
"Surprise to us! We paid to much in the past" |
| View more reviews | |
