Klüber Summit
-
Klüber Summit Ultima 68
Quick orderingMore infoKlüber Summit Ultima 68
Synthetic air compressor oils for oil change intervals up to 12,000 operating hours
Application Klüber Summit Ultima 68
Klüber Summit Ultima oils have been especially designed for screw-type compressors subject to high loads. They are used for oil change intervals up to 12,000 operating hours in oilinjected screw-type compressors. Klüber Summit Ultima oils can be used for compressors that were previously run with mineral oils. Klüber Summit Ultima oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit Ultima oils offer better oxidation stability than conventional synthetic oils due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be reduced several-fold compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; it also helps to prevent the gumming of pneumatic valves in the compressed air circuit.
Show moreStarting at: £ 28.48 / L -
Klüber Summit Ultima 46
Quick orderingMore infoKlüber Summit SH 100
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 100
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: £ 28.48 / L -
Klüber Summit FG 500
Quick orderingMore infoKlüber Summit FG 500
Fully synthetic compressor oils for the food-processing and pharmaceutical industries
Application Klüber Summit FG 500
Klüber Summit FG oils can be used as vacuum pump oils, evacuating air or inert gases if a food grade oil is required. Klüber Summit FG oils can be used for oil-injected screw-type compressors, reciprocating piston compressors and rotary vane compressors. Klüber Summit FG oils are intended for use in compressors of the food-processing and pharmaceutical industries requiring oilfree compressed air (without oil vapour, which cannot be removed by the oil separator). These oils are also suitable for gear lubrication in oil-free screwtype compressors.
Show moreStarting at: £ 28.73 / L -
Klüber Summit NGSH 150
Quick orderingMore infoKlüber Summit NGSH 150
Synthetic gas compressor lubricants
Application Klüber Summit NGSH 150
Klüber Summit NGSH are designed for rotary screw and reciprocating compressors in natural gas service. Due to the varying make-up of gases and operating conditions, please contact your local Klüber representative for specific product recommendations.
Show moreStarting at: £ 27.80 / L -
Klüber Summit LCG 68
Quick orderingMore infoKlüber Summit LCG 68
Synthetic compressor oils for acidic and reactive gases such as landfill and biogases.
Application Klüber Summit LCG 68
The Klüber Summit LCG 68 was developed for application in screw-type compressors working with natural gases or the reactive and corrosive gases encountered in biogas plants, refineries, EOR processes or the chemical industry. Klüber Summit LCG 68 compressor oils do not contain sulphur or any other elements that might react with chlorine-containing components or acidic gases. They can also be used with gases containing chlorine where mineral oils, esters or polyglycols are not suitable for application. Klüber Summit LCG 68 compressor oils protect surfaces against the corrosive effects of acidic gases such as hydrogen sulphide or carbon dioxide. To select the right viscosity, the composition of the gas flow and all other operating conditions have to be known in detail
Show more£ 32.46 / L -
Klüber Summit DSL 32
Quick orderingMore infoKlüber Summit DSL 32
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 32
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: £ 18.96 / L -
Klüber Summit SH 46 XS
Quick orderingMore infoKlüber Summit SH 46 XS
Synthetic air compressor oil enabling oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 46 XS
Klüber Summit SH 46 SX was especially developed for the lubrication of highly loaded rotary screw compressors which require an oil formulated without the use of silicone raw materials. Klüber Summit SH 46 XS is intended for oil-injected rotary screw compressors with oil change intervals of up to 10,000 operating hours. Used compressors can be switched over from conventional mineral oils to Klüber Summit SH 46 XS. Klüber Summit SH 46 XS is neutral towards most elastomers typically used in air compressors - no leakage is to be expected. Klüber Summit SH 46 XS offers very good oxidation stability due to the synthetic base oil, thus minimising oxidation residues in the compressor and extending oil change intervals and the service life of the oil separator. The product contains special inhibitors to largely prevent the formation of residues in the compressors. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content in the compressed air.
Show more£ 34.63 / L -
Klüber Summit NGSH 220
Quick orderingMore infoKlüber Summit NGSH 220
Synthetic gas compressor lubricants
Application Klüber Summit NGSH 220
Klüber Summit NGSH are designed for rotary screw and reciprocating compressors in natural gas service. Due to the varying make-up of gases and operating conditions, please contact your local Klüber representative for specific product recommendations.
Show moreStarting at: £ 28.19 / L -
Klüber Summit SH 55
Quick orderingMore infoKlüber Klüber Summit SH 55
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Klüber Summit SH 55
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: £ 28.00 / L -
Klüber Summit SH 32
Quick orderingMore infoKlüber Summit SH 32
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 32
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: £ 21.09 / L -
Klüber Summit DSL 68
Quick orderingMore infoKlüber Summit DSL 68
Full synthetic air compressors for oil compression intervals up to 8,000 operating hours
Applying Klüber Summit DSL 68
The Klüber Summit DSL 68 oil is specially designed for oil freshening intervals of up to 8,000 operating hours* in oil-injected propeller compressors. Klüber Summit DSL 32 and 46 can also be used for lubricating centrifugal compressors, while Klüber Summit DSL 68 is particularly suitable for the lubrication piston compressors. Klüber Summit DSL oils are used for compressors previously used with conventional mineral oils. These oils are neutral compared to most elastomer seals used in air compressors, so leakage is not to be expected. Klüber Summit DSL 68 is biodegradable and can therefore be used in environmentally friendly applications. Klüber Summit DSL 68 oil offer good oxidation stability thanks to the synthetic base oil, minimising oxidative residues in the compressors in the oil freshening intervals and extending the life of oil filters and separators (screw compressors) and valves (piston compressors).
Show moreStarting at: £ 27.10 / L -
Klüber Summit R 300
Quick orderingMore infoKlüber Summit R 300
Synthetic compressor oils, particularly for highly loaded ammonia and CO2 refrigeration plants
Application Klüber Summit R 300
Klüber Summit R series lubricants have been designed especially for highly loaded screw-type and reciprocating piston compressors which are operated with ammonia (R717) or CO2 (R744). These lubricants can also be used with natural hydrocarbon refrigerants like propane (R290), propylene (R1270) or butane (R600). Especially with these refrigerants, the solubility of the gas in the oil under operating conditions and the resulting drop in viscosity has to be taken into account. Klüber Lubrication would be pleased to assist you in selecting the most appropriate oil. Due to the synthetic base oil contained in the Klüber Summit R series lubricants, oil carryover into the refrigeration cycle is much lower than with conventional mineral oils, which helps to reduce oil consumption. The viscosity of the oils remains constant for a long time, due to the fact that only a few highly volatile fractions are contained in the oil. Oil changes due to the increase in viscosity can be extended considerably. The base oil offers high chemical stability, particularly to ammonia, the typical blackening of conventional mineral oils or deposits in the refrigeration cycle are prevented. Our experience gained in practice has shown that Klüber Summit 200 can be used for evaporating temperatures as low as ≥-50°C depending on the operating conditions.
Show moreStarting at: £ 34.48 / L -
Klüber Summit FG 250
Quick orderingMore infoKlüber Summit FG 250
Volledig synthetische compressoroliën voor de voedselverwerkende en farmaceutische industrie industrieën
Toepassing Klüber Summit FG 250
Klüber Summit FG oliën kunnen worden gebruikt als vacuümpompolie, het afvoeren van lucht of inerte gassen als een voedselveilige olie nodig is. Klüber Summit FG oliën kunnen worden gebruikt voor oliegeïnjecteerde schroeven. compressoren, zuigercompressoren en draaischoepen compressoren. Klüber Summit FG oliën zijn bedoeld voor gebruik in compressoren van de voedselverwerkende en farmaceutische industrie die olievrije perslucht nodig heeft (zonder oliedamp, wat niet kan verwijderd door de olieafscheider). Deze oliën zijn ook geschikt voor de smering van tandwielen in olievrije schroefcompressoren.
Show moreStarting at: £ 25.84 / L -
Klüber Summit DSL 46
Quick orderingMore infoKlüber Summit DSL 46
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 46
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: £ 19.87 / L -
Klüber Summit DSL 125
Quick orderingMore infoKlüber Summit DSL 125
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 125
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: £ 33.18 / L -
Klüber Summit RPS 52
Quick orderingMore infoKlüber Summit RPS 52
Synthetic compressor oil based on polyglycol for ammonia refrigerating plants using dry evaporation
Application Klüber Summit RPS 52
Klüber Summit RPS 52 has been designed especially for the lubrication of screw-type compressors in refrigerating plants using ammonia (R 717) and dry evaporation. Unlike mineral oils and polyalphaolefins, Klüber Summit RPS 52 is miscible with ammonia, thus the oil entrained in the refrigeration cycle is recycled to the compressor together with the refrigerant. Therefore, it is no longer necessary to have oil catches in the refrigeration cycle, like in the case of nonmiscible oils. Especially in the evaporator of the refrigeration cycle such miscibility helps to reliably recycle the oil to the compressor at low evaporator temperatures. Owing to the synthetic base oil of Summit RPS 52 oil carryover into the refrigeration cycle is much lower than with conventional mineral oils. Therefore, oil-related problems in the refrigeration cycle are prevented right from the beginning. The base oil of Klüber Summit RPS 52 stands out for its stability to ammonia – the typical blackening of conventional mineral oils or deposits in the refrigeration cycle are prevented and oil change intervals can be extended considerably. Our experience gained in practice has shown that Klüber Summit RPS 52 can be used for evaporating temperatures as low as -40°C depending on the operating conditions. Klüber Summit RPS 52 protects against wax-like deposits, thus increasing the efficiency of the refrigeration plant.
Show more£ 40.66 / L -
Klüber Summit PGI 150
Quick orderingMore infoKlüber Summit PGI 150
Synthetic gas compressor lubricants
Application Klüber Summit PGI 150
Klüber Summit PGI compressor lubricants are designed for rotary screw and piston compressors used in the compression of propane. They are also suitable for refrigeration compressors where propane is the refrigerant. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representatives for specific viscosity recommendations.
Show moreStarting at: £ 36.16 / L -
Klüber Summit SH 100
Quick orderingMore infoKlüber Summit SH 100
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 100
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: £ 36.55 / L -
Klüber Summit Supra 32
Quick orderingMore infoKlüber Summit Supra 32
Fully synthetic air compressor oils based on polyglycol
Application Klüber Summit Supra 32
Klüber Summit Supra Coolant and Klüber Summit Supra 32 have been especially designed for oil change intervals up to 8,000 operating hours in oil-injected screw-type compressors which are prefilled by the manufacturer with polyglycol oil. Due to the specific viscosity and special formulation, Klüber Summit Supra 32 is also suitable for the lubrication of turbocompressors. Klüber Summit Supra 26 N was especially developed for turbocompressors in order to meet the OEMs' viscosity requirements. An oil change interval of up to 40,000 operating hours is possible for turbocompressors, depending on the operating conditions. To enable Klüber Summit Supra 26 N achieve this oil service life it is indispensable to perform an oil condition monitoring every six months. Without prior oil analysis no conclusion can be drawn on the oil's suitability for further use. Klüber Summit Supra oils can be mixed with other polyglycol oils and the Klüber Summit Ultima series. The products are not miscible with mineral oils and synthetic hydrocarbon oils.
Show moreStarting at: £ 38.12 / L -
Klüber Summit PGS 68
Quick orderingMore infoKlüber Summit PGS 68
Synthetic gas compressor oils
Application Klüber Summit PGS 68
Klüber Summit PGS compressor oils are suitable for piston, screw-type and rotary vane compressors for natural or process gas. Klüber Summit PGS-2 is ideal for hydrocarbon gases of densities greater than 1.5 g/cm³ because this product is extremely resistant to dilution and absorption by hydrocarbon gases. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representative for specific viscosity recommendations.
Show moreStarting at: £ 36.45 / L
Our customers value us
Ian Adair
"We like your site, it shows that you are experts in lubricants!"
Cris Scullion
"You deliver quicker than our previous UK supplier!"
Stuart Wyatt
"Surprise to us!
We paid to much in the past"
Our customers value us
Ian Adair
"We like your site, it shows that you are experts in lubricants!"
Cris Scullion
"You deliver quicker than our previous UK supplier!"
Stuart Wyatt
"Surprise to us!
We paid to much in the past"
Discover the benefits of OilOnline!
Are you looking to buy oil from OilOnline? Then you can take advantage of many benefits:
Our knowledge
is your strength!
At OilOnline, we have a team of passionate lubricant specialists with extensive knowledge and experience.
Detailed
advice
Our experts will assist you in choosing the best products, so you can get the most out of your vehicle or machine.
Uncompromising
Quality
At OilOnline, we only offer lubricants from globally renowned quality brands.
Save on
Lubricants
By ordering larger quantities, you can take advantage of price benefits at OilOnline.