Award-winning Technical experts!


Quality brands only


Same day dispatch
Check current delivery situation

Klüber Summit FG 500

Your benefit: pallet advantage from 2 barrels
QTY Size Liter price ex. VAT Price ex. VAT Price Incl. VAT
- + 208 L £ 0,00 £ 6865,19 £ 0,00
- + 19 L £ 0,00 £ 806,93 £ 0,00
- + 3.8 L £ 0,00 £ 192,00 £ 0,00
Total
£ 0,00

Klüber Summit FG 500

Fully synthetic compressor oils for the food-processing and pharmaceutical industries

Application Klüber Summit FG 500

Klüber Summit FG oils can be used as vacuum pump oils, evacuating air or inert gases if a food grade oil is required. Klüber Summit FG oils can be used for oil-injected screw-type compressors, reciprocating piston compressors and rotary vane compressors. Klüber Summit FG oils are intended for use in compressors of the food-processing and pharmaceutical industries requiring oilfree compressed air (without oil vapour, which cannot be removed by the oil separator). These oils are also suitable for gear lubrication in oil-free screwtype compressors.

Product Description

Details

Performance, Features & Benefits of Klüber Summit FG 500 are:

  • Klüber Summit FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industries and comply with FDA 21 CFR Sec 178.3570
  • ISO 21469 certified – supports compliance with the hygienic requirements of your production.
  • Low maintenance and operating costs due to extended oil change intervals up to 5,000 operating hours1 in oilinjected screw-type compressors
  • Easy compressor conversion from mineral to the synthetic Klüber Summit FG oils due to miscibility and compatibility with common seal materials
  • Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
  • Longer service of oils filters, activated carbon filters and oil separators
  • Excellent demulsifying behaviour and hence good water separation ability

If you have any questions, please contact OlieOnline Technical Helpdesk

Product Description Klüber Summit FG 500

Klüber Summit FG oils are special compressor oils developed for the food-processing and pharmaceutical industries. They are fully synthetic and can be mixed with mineral oil as well as other synthetic hydrocarbon oils. Klüber Summit FG oils offer very good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Klüber Summit FG oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüber Summit FG oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
 


Typical Characteristics

Product specifications   Method

Klüber Summit FG 500

Article number     050096
NSF-H1 registration     143 608
Density 20°C  DIN 51757 approx. 84
g/cm³
Kinematic viscosity 40 °C  DIN 51562 pt. 01/ASTM
D-445/ASTM D 7042
approx. 150
mm²/s
Kinematic viscosity 100°C  DIN 51562 pt. 01/ASTM
D-445/ASTM D 7042
approx. 19
mm²/s
Viscosity index   DIN ISO 2909 >= 120
Demulsifying capacity  54°C DIN 51599, ASTM D
1401
 
Demulsifying capacity  82 °C DIN ISO 6614, ASTM D
1401
40/37/3 ml
Pour point   DIN ISO 3016 <= -39 °C
Flash point, Cleveland,
open-cup apparatus
  DIN EN ISO 2592 >= 250 °C
Minimum shelf life from the date of
manufacture - in a dry, frost-free place and in
the unopened original container, approx
    60 months

 

Application notes

When selecting the oil viscosity for air compressors, please observe the manufacturers' instructions. For oil-injected screw-type compressors normally the viscosity grades ISO VG 32, 46 and 68 are used, for reciprocating piston and rotary vane compressors ISO VG 68, 100 and 150 and for centrifugal compressors ISO VG 32. Notes on switching from mineral to synthetic oils: When switching a used compressor to a Klüber Summit FG oil, drain old oil from whole circuit of compressor while still warm. We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit FG oil. When switching from mineral oil to a synthetic Klüber Summit FG oil please bear in mind that the compressor may contain oxidation residues in the form of blackened or contaminated oil. As such residues can affect the service life of the fresh Klüber Summit FG oil, the compressor should be cleaned using the Klüber Summit Varnasolv conditioner. After switching to a Klüber Summit FG oil we recommend determining the oil change interval through an oil analysis or the Klüber Summit TAN Kit after approx. 500 to 1000 operating hours. For further information please turn to your contact person at Klüber Lubrication or see the product information leaflet on Klüber Summit Varnasolv.
 

FAQ

Questions and Answers

Add your question

There are no entries.


Additional Information

Additional Information

Brand Klüber
ACEA DIN ISO OEM No
OEM Approval No

You may also be interested in the following product(s)

Klüber Summit FG 100

Klüber Summit FG 100

Starting at: Excl. Tax: £626.63 Incl. Tax: £626.63

Klüber Summit FG 250

Klüber Summit FG 250

Starting at: Excl. Tax: £749.18 Incl. Tax: £749.18

Klüber Summit FG 300

Klüber Summit FG 300

Starting at: Excl. Tax: £761.47 Incl. Tax: £761.47