Fuchs Lubricants

PLANTO TAC 68

PLANTO TAC 68 field of applications:

PLANTO TAC 68 was developed specially for all lubricated saw chains which are used in the toughest conditions in environmentally sensitive areas such as protected water zones, forests, tree nurseries, etc.

RENOLIN UNISYN CLP 68

Fully-synthetic industrial gear lubricants based on polyalphaolefins

RENOLIN UNISYN CLP 68 field of applications:

The oils of the RENOLIN UNISYN CLP series are used for all applications in industry where a synthetic oil of the CLP type according to DIN 51517-3 is recommended by the manufacturer. Highly-stressed bearings, joints, pressure screws, spur gears, worm gears and planetary gears can be reliably, safely and economically supplied even at short-term peak temperatures up to 150 °C.

Please note!! Price of RENOLIN UNISYN CLP 68 drops automatically in larger quantities.

RENOLIN PG 460

Fully synthetic polyglycol based gear- and general lubrication oils

RENOLIN PG 460 field of applications:

The RENOLIN PG gear oils are mainly suitable for the lubrication of gear units and worm gears / roller bearings and friction bearings which are subject to high mechanical and thermal stress. RENOLIN PG oils offer advantages compared with mineral oil-based gear oils especially in applications with high sliding velocities (e.g. worm gear units). Due to the high oxidation stability, the oil change intervals can be extended and the maintenance costs can be reduced at higher operating temperatures. The use of RENOLIN PG in worm gears (steel-bronze pairing) leads to a significant reduction of friction and wear. The RENOLIN PG products can also be used for paper machines, calendars, conveying machines and milling bearings. Peak temperatures of up to 200ºC are temporarily tolerable.

PLANTOSYN 68 HVI

Environmentally acceptable hydraulic fluid and lubricating oil based on saturated synthetic esters

PLANTOSYN 68 HVI field of applications:

PLANTOSYN HVI oils are rapidly biodegradable synthetic saturated ester oils. They can be used in all applications in mobile and stationary hydraulic units where the use of biodegradable synthetic ester based hydraulic oil according to ISO 15380 HEES is recommended. The PLANTOSYN HVI products should be used where oil leakage or oil spillage will give a soil or water pollution. PLANTOSYN HVI products can be used as an alternative to conventional HLP/HM hydraulic oils. The changing over procedures according ISO 15380 have to be observed.

Please note!! Price of PLANTOSYN 68 HVI drops automatically in larger quantities.

RENISO PG 68

RENISO PG 68 field of applications:

RENISO PG 68 and GL 68 are ultra-dried, synthetic refrigeration oils based on PAG NH3 systems which operate on the principle of direct expansion. They differ in their miscibility with NH3. Suitable for screw and reciprocating piston compressors. RENISO PG 68 and GL 68 are also recommended for the use with hydrocarbon refrigerants.

Please note!! Price of RENISO PG 68 drops automatically in larger quantities.