Award-winning Technical experts!

Free delivery for Barrels
( > 150 Kilo )

Same day dispatch
+ 850 Products in stock

Metalworking

Items 1 to 20 of 36 total

Set Descending Direction
per page

Page:
  1. 1
  2. 2
  • HOUGHTO-CLEAN 510

    Solvent based degreaser

    Properties of Houghto-Clean 510

    Houghto-Clean 510 is an extremely versatile slow evaporating solvent cleaner.
     

    Application of Houghto-Clean 510

    Houghto-Clean 510 has been formulated for manual and and immersion cleaning applications as an alternative to to halogenated and other user and environmentally and unacceptable solvent cleaners.

    Houhto-Clean 510 has been formulated has to remove low viscosity neat oils, greases, waxes and similar type soils from ferrous and non-ferrous metals, solvent resistant composites plastics and elastomers.

    Degreasing of parts before assembly or welding is not necessary. Cleaned surfaces are left with a virtually imperceptible light coating which can provide temporary corrosion pretection of ferrous metals.

    Learn More

    Starting at: Excl. Tax: £95.50 Incl. Tax: £115.56

  • Houghton Dromus B

    Houghton Dromus B

    Water miscible metalworking fluid.

    Houghton Dromus B is a general purpose soluble oil for light to moderate duty machining on a wide range of materials.

    It is free from biocides.

    Properties:

    Dromus B is a high mineral oil content soluble oil for easy to medium duty machining, including grinding, on a wide variety of materials including ferrous as well as nonferrous metals.

    Recommendations for use: General machining 6 - 8 %, Severe cutting operations 8 - 12 %.

    Learn More

    Starting at: Excl. Tax: £95.79 Incl. Tax: £115.91

  • Houghton Garia 405 M-32

    Houghton Garia 405 M-32

    Garia 405 M-32 is a neat cutting oil. It is commonly used for machining higher alloyed steels, aluminum and magnesium alloys.

    Properties

    Garia 405 M-32 is a chlorine free product. It is free of heavy metals and has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and antiwear additives which give the oil high load carrying properties.

    Due to its active sulphur content, the oil may discolor yellow metals.

    Applications

    Garia 405 M-32 is recommended for general machining operations such as turning, drilling and gear hobbing on steel of low to medium tensile strength, aluminum and magnesium alloys. It is also suitable for grinding where higher viscosity is required, e.g. thread grinding.

     

    Learn More

    Starting at: Excl. Tax: £99.31 Incl. Tax: £120.17

  • Houghton Macron EDM 110

    Houghton Macron EDM 110 Neat Oil for Spark Erosion 

    MACRON EDM 110 is based on aliphatic hydrocarbons with very low content of aromatics for improved working conditions. High dielectric strength and good flushing properties contribute to a high removal capacity.

    MACRON EDM 110 can be used with all standard electrode materials such as copper or graphite.

    Applications:

    MACRON EDM 110 is a universal spark erosion oil which shows very good results with both rough and fine machining. Even in very small erosion slots, the product shows a good flushing performance. It also performs well in EDT machines for roller texturizing.

    MACRON EDM 110 can be also used for grinding cutting tools (cemented carbide), and as low viscous spindle oil e.g. for narrow fit spindles and as magnaflux inspection oil.

    Approved by Waldrich and Makino.

    Learn More

    Starting at: Excl. Tax: £107.55 Incl. Tax: £130.14

  • Houghton Garia 601 M-22

    Houghton Garia 601 M-22

    It is based on hydro treated mineral oils with a low aromatic content.It's formulated to a combination of polar, extreme pressure and anti-wear additives.

    Properties

    Its composition gives the oil high load carrying properties. Its high additive content and controlled extreme pressure properties allow high rates of metal removal, which results in reduced machining costs.

    The oil provides good tool life and excellent surface finish of the machined work pieces. Efficient anti mist additives reduce mist in the air.

    Due to its active sulphur content, the oil may discolor yellow metals.

    Application

    Garia 601 M-22 is recommended for machining high alloyed steels, stainless, heat resistant or austenitic steels and aluminum or magnesium alloys. The oil gives excellent results with many difficult operations such as broaching, deep-hole drilling, tapping, shaping or shaving of gears.

    Learn More

    Starting at: Excl. Tax: £112.39 Incl. Tax: £135.99

  • Houghton Adrana D 208.01

    Houghton Hocut 3220 is the successor to Adrana D 208.01

    Earlier Adrana D 208.01 was replaced by Hocut 3220

    • General Machining 5-7%
    • Loops 4-6%

    It's important to keep this mix-ratio .

    Concentrate consumption also depends on the amount of mineral oil, additive package, and technology, water quality, and ultimately on the most important Use of the product. Our expert can tell you a lot more.

    We are now shipping the Hocut 3220 instead of the Adrana D 208.01.You can place your order in the table below.

    For more information on this product, call Page .

    For questions, please contact contact us.

    Learn More

    Starting at: Excl. Tax: £115.50 Incl. Tax: £139.76

  • Houghton Hocut 3220 stable emulsion

    Houghton Adrana D 208.01 new name will change into Hocut 3220

    Water miscible metalworking fluid.

    Properties

    Hocut 3220 is a high quality, general-purpose metalworking fluid for easy to medium duty applications on ferrous metals.

    Applications:

    It is recommended for easy to medium duty operations on cast iron and (low to medium alloyed) ferrous metals.

    It is designed to be used on CNC machine tools, given its excellent detergent, and high wetting properties.

    Hocut 3220 is suitable for all removal and grinding operations on stand-alone machines and in central systems.

    Hocut 3220 can be used over a broad water hardness range. Recommendations for use: General machining.

    Learn More

    Starting at: Excl. Tax: £115.50 Incl. Tax: £139.76

  • Houghton Garia 603 S-15

    Houghton Garia 603 S-15 

    Neat Cutting Oil for Broaching and Severe Machining.

    GARIA 603 S-15 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

    GARIA 603 S-15 contains active sulphur and may discolour yellow metals.

    The oil is zinc and chlorine free.

    Applications:

    GARIA 603 S-15 is a high performance product for severe operations as well as for difficult to machine materials.

    GARIA 603 S-15 is designed for deep drilling with BT A. Ejector and gun drills. The oil has proven performance for severe broaching e.g. for internal broching of planetary gear rings.

    Approved by Klingelnberg for Titanium grinding.

    Learn More

    Starting at: Excl. Tax: £121.44 Incl. Tax: £146.94

  • Houghton Metalina Fluid D 202

    Previously Houghton Metalina Fluid D 3202.02

    Metalina D 202 is a free synthetic grinding fluid with a high quality corrosion inhibiting additive package.

    The mineral oil-free, transparent solution provides long sump life and excellent tramp oil rejection.

    Applications

    Metalina D 202 is recommended for surface and cylindrical grinding ferrous Materials including cast Iron. The synthetic formula completely rejects tramp oil for cleaning this in use and provides extremely no foam maximum filtration efficiency and rapid finest separation. The Products is designed for soft to medium water hardness quality. Recommendation for use Ferrous grounding 3 to 6%

    For any further questions don't hesitate contact us.

    Learn More

    Starting at: Excl. Tax: £125.97 Incl. Tax: £152.42

  • Houghton Fenella VD 201 N

    Neat Volatile Drawing Oil - Houghton Fenella VD 201 N is a low viscosity stamping and drawing oil.

    Properties

    Fenella VD 201 N is characterized by the absence of residual films after evaporation. The product is based on polar and anti-corrosion additives. Fenella VD 201 N does not discolour yellow metals.

    Application

    Houghton Fenella VD 201 N is an evaporative product for stamping and drawing of thin non-ferrous and ferrous materials. The product does not leave a residual film or react with paint.

    Degreasing of parts before assembly or welding is not necessary.

    Learn More

    Starting at: Excl. Tax: £131.86 Incl. Tax: £159.55

  • Houghton Adrana A 3601.04

    Houghton Adrana A 3601.04

    A water miscible metalworking fluid.

    Properties

    It is recommended for heavy-duty machining operations on low silicon content aluminium and is free of amines, boric acid, nitrite, chlorine and formaldehyde releasers.

    Applications

    Metals: “dirty” metals, such as cast iron.

    • Usage: a wide range of machines, such as Kingsburys, Bullards, bar machines, lathes, chuckers, and centerless and cylindrical grinders.
    • Processes: machining and grinding.
    • Longer sump life.
    • Heavy-duty.
    • Non-foaming.

     

    Learn More

    Starting at: Excl. Tax: £134.51 Incl. Tax: £162.76

  • Houghton MWS Additive AF 2290

    Houghton MWS Additive AF 2290

    MWS Additive AF 2290 is an effective defoamer for water-containing mineral oils and mineral oil-free cooling lubricants. 

    Properties

    MWS Additive AF 2290 is usually at a concentration of 0.01 - 0.02% . 

    Before each new addition is necessary to wait until a thorough mixing has occurred.

    The defoamers should be added as long as until a sufficient foam collapse occurred (use concentration max. 0.05%). 

    The defoamer is premixed with water or used as an emulsion.

    Learn More

    Starting at: Excl. Tax: £135.60 Incl. Tax: £164.08

  • Houghton Hocut 5140

    Previously Houghton Metalina B 200

    Synthetic water-miscible coolant (transparent)

    Recommended usage concentrations for Hocut 5140 are:

    • Round & surface grinding: 3 - 5%
       
    Applications Hocut 5140

    Hocut 5140 is recommended for surface and cylindrical grinding of cast-iron and ferrous alloys over a broad water hardness range

    Your advantage: Price of Hocut 5140 drops automatically with higher volumes.

    Learn More

    Starting at: Excl. Tax: £135.97 Incl. Tax: £164.52

  • Houghton Sitala A 400

    Houghton Sitala A 400

    A new generation of amine and boric acid-free water-miscible metalworking fluids, recommended for general machining on a wide range of metals including all kind of Aluminium alloys.

    SITALA A 400 is a medium duty emulsifiable, boron and amine-free metalworking fluid forming a stable macroemulsion based on high quality mineral oil and polar lubricity additives.

    Applications:

    SITALA A 400 is recommended for medium machining and grinding operations on a wide range of material including, cast iron, low to medium alloyed steels and aluminium. A non-staining, low alkalinity formula also makes it suitable for machining yellow metals.

    The product is designed for soft to medium hardness and for use in single sump machines.

    It is not normally used in large central systems.

    Learn More

    Starting at: Excl. Tax: £138.29 Incl. Tax: £167.33

  • Houghton Adrana A 2859

    Houghton Adrana A 2859

    Properties

    • High lubricity resulting in prolonged tool life and increased surface finish.
    • High stability extends the fluid life.
    • Good corrosion protection.
    • Low foam in water (assuming medium hardness).
    • Operator friendly.

    Applications


    Adrana A 2859 is suitable for heavy-duty machining operations on aluminium alloys, low & high alloyed ferrous metals and stainless steels in individual machines and central systems.


     

    Learn More

    Starting at: Excl. Tax: £140.80 Incl. Tax: £170.37

  • Houghton Adrana D 601.01

    Adrana D 601.01 has been replaced by Hocut 4444

    Hocut 4444 is the replacement for Houghton Adrana D 601.01

    • General machine machining 8-10%

    It is important that this mixing ratio is maintained.

    Consumption of concentrate also depends on the amount of mineral oil chosen, the additive package and technology, the water quality and, finally, the most important use of the product. Our expert can tell you much more about this.

    From now on we will deliver the Hocut 4444 instead of the Adrana D 601.01.You can place your order in the table below.

    If you want more information about this product please view this page .

    If you have any questions please contact us contact with us.

    Learn More

    Starting at: Excl. Tax: £145.84 Incl. Tax: £176.47

  • Houghton Sitala D 201.03

    Houghton Hocut 4444 is the successor of Sitala D201.03

    Previously Sitala D 201.03 has been replaced by Hocut 4444

    • General machine machining 8-10%

    It is important that this ratio is maintained

    Consumption of concentrate also depends on the amount of mineral oil chosen, the additive package and technology, the water quality and, finally, the most important use of the product. Our expert can tell you much more about this.

    We will ship the Hocut 4444 instead of the Sitala D 201.03. You can place your order in the table below.

    If you want more information about this product please view this page.

    If you have any questions please contact us

    Learn More

    Starting at: Excl. Tax: £145.84 Incl. Tax: £176.47

  • Houghton Hocut 4444

    Houghton 4444 previous Sitala D 201.03 and Adrana D 601.01

    Hocut 4444 is a high quality water miscible coolant for general machining of steel and aluminum alloys.

    Recommended usage levels for Houghton Hocut 4444 are:

    • + Low to Medium Machining: 8 - 10%
    Application Houghton Hocut 4444

    HOCUT 4444 is recommended for machining low to medium materials, including high stress machining, from a variety of materials, including aluminum alloys, fiber composites, but also iron alloys.

    Learn More

    Starting at: Excl. Tax: £145.84 Incl. Tax: £176.47

  • Castrol Hysol SL 36 XBB

    Castrol Hysol SL 36 XBB

    High performance semi-synthetic metalworking fluid

    Application Castrol Hysol SL 36 XBB

    Hysol SL 36 XBB is especially designed for machining of cast iron and low-medium alloyed steel.

    Your advantage! Price of Castrol Hysol SL 36 XBB drops automatically in larger quantities.

    Learn More

    Starting at: Excl. Tax: £154.80 Incl. Tax: £187.31

  • Castrol Hysol SL 37 XBB

    Castrol Hysol SL 37 XBB

    High performance semi-synthetic metalworking fluid

    Application Castrol Hysol SL 37 XBB

    Hysol SL 37 XBB is especially designed for machining of cast iron and low-medium alloyed steel.

    Your advantage! Price of Castrol Hysol SL 37 XBB drops automatically in larger quantities.

    Learn More

    Starting at: Excl. Tax: £154.80 Incl. Tax: £187.31

Items 1 to 20 of 36 total

Set Descending Direction
per page

Page:
  1. 1
  2. 2